ChevyParts
My Garage
My Account
Cart
OEM 2000 GMC Jimmy Coil Springs
Strut Spring- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Coil Springs found
2000 GMC Jimmy Spring, Front Part Number: 15058961
Product Specifications- Other Name: Spring, Front Chassis; Coil Springs; Spring, Front(Coil Type)
- Position: Front
- Replaces: 15654774
- Item Weight: 15.30 Pounds
- Item Dimensions: 6.0 x 5.8 x 13.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15058961
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2000 GMC Jimmy Spring, Front Part Number: 15058960
Product Specifications- Other Name: Spring, Front Chassis; Coil Spring Set; Coil Springs; Spring, Front(Coil Type)
- Position: Front
- Replaces: 15654773
- Item Weight: 13.90 Pounds
- Item Dimensions: 13.7 x 6.1 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15058960
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2000 GMC Jimmy Coil Spring, Front Part Number: 15058959
Product Specifications- Other Name: Spring, Front Chassis; Coil Spring Set; Coil Springs; Spring; Spring, Front(Coil Type)
- Position: Front
- Replaces: 15654772
- Item Weight: 12.90 Pounds
- Item Dimensions: 5.9 x 5.4 x 13.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15058959
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2000 GMC Jimmy Spring, Front Part Number: 15058958
Product Specifications- Other Name: Spring, Front Chassis; Coil Spring Set; Coil Springs; Spring, Front(Coil Type)
- Position: Front
- Replaces: 15654771
- Item Weight: 10.40 Pounds
- Item Dimensions: 14.2 x 5.7 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15058958
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2000 GMC Jimmy Coil Springs
With a comprehensive array of OEM 2000 GMC Jimmy Coil Springs, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 GMC Jimmy Coil Springs are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2000 GMC Jimmy Coil Springs Parts and Q&A
- Q: How to Service and Repair Coil Springs on 2000 GMC Jimmy?A: Service and repair of the coil spring starts by removing the stabilizer shaft link between the lower Control Arm and shock absorber. Fix the coil spring remover and installer (J 23028-01) to a suitable jack extension so you can cradle the lower Control Arm bushings using this same tool. Your next step involves using the steering wheel to twist it into one position so the linkage clears the front pivot bolt of the lower Control Arm before you take out the bolts. First take off the lower Control Arm pivot bolts and nuts and then remove the lower Control Arm rear pivot bolt with the front pivot bolt. Use the coil spring remover and installer tool (J 23028-01) to reduce front coil spring tension before removing the front coil spring including its insulators while maintaining safe distances from both the lower Control Arm and lower Ball Joint assembly. During front coil spring installation position the spring to expose a single drain inspection hole but leave another drain hole partially or entirely uncovered by the spring. Use the coil spring remover and installer (J 23028-01) to lift and support the Control Arm during installation before seating the coil spring and insulator into the upper frame spring seat. The installation of the lower Control Arm to the frame depends on adequate steering linkage clearance achieved by applying specific bolt installation sequences. Install the lower Control Arm front pivot bolt then add its new nut before installing the lower Control Arm rear pivot bolt together with its new nut. During front suspension load conditions apply 115 nm (85 ft. Lbs.) to the lower Control Arm front pivot bolt and 98 nm (72 ft. Lbs.) to the lower Control Arm rear pivot bolt nut. Replace the coil spring remover and installer (J 23028-01) before you install the shock absorber and stabilizer shaft link to the lower Control Arm. Inspection of the front wheel alignment must be the last step.
Related 2000 GMC Jimmy Parts
2000 GMC Jimmy Ball Joint
2000 GMC Jimmy Axle Beam Mount
2000 GMC Jimmy Axle Support Bushings
2000 GMC Jimmy Control Arm
2000 GMC Jimmy Control Arm Bolt
2000 GMC Jimmy Control Arm Bumper
2000 GMC Jimmy Control Arm Bushing
2000 GMC Jimmy Leaf Spring Plate
2000 GMC Jimmy Leaf Spring Shackle
2000 GMC Jimmy Steering Knuckle
2000 GMC Jimmy Sway Bar Link
2000 GMC Jimmy Torsion Bar