OEM 2000 GMC Jimmy Body Control Module

2000 GMC Jimmy Body Control Module Parts and Q&A

• Q: How to replace the Body Control Module (BCM) on 2000 GMC Jimmy?

  A: Before starting bcm installation maintain the Ignition Switch position in off. The brown bcm connector needs special attention when handling due to setting dtcs even during disconnection. Take out the two sound insulators from the vehicle's instrument panel area starting with the left side and then the center. Push back both snap retainers of the bcm to unlock it. Tilt and pull the module free from its bracket. Place the bcm under the wide hook retainer with its label away from the bracket base. Feeding the left side into position will allow you to snap it firmly into place when it is fully in place and both snap retainers engage. Plug the electrical connectors back into the bcm after putting both instrument panel sound insulators back. Use the techline terminal and scanner to program the bcm with correct settings while performing bcm programming and clearing dtc issues.