How to replace the Crankshaft Position Sensor (24X) on 2000 Chevrolet Malibu?

Remove the 24x crankshaft position (CKP) sensor. To do that, first turn off the ignition, and then remove the serpentine Drive Belt from the Crankshaft Pulley. Put the car up on a hoist and take off the crankshaft Harmonic Balancer. Take note of the routing of the sensor harness before unwinding, then pull off the harness retaining clip then pull off the bolt then pull off the sensor electrical connector, then remove the bolts to clear the sensor. For installation, install the 24x Crankshaft Position Sensor and fasten it using bolts with the harness routed as specified during removal. Mount the harness retaining clip with the bolt and tighten the bolts to 10 n.m (8 lb ft). Then connect to the sensor electrical connector, install the balancer back at the crankshaft, lower the vehicle and fit in the serpentine drive. Lastly, complete the ckp system variation learn procedure.

OEM 2000 Chevrolet Malibu Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Position Sensors found

View related parts
2000 Chevrolet Malibu Crankshaft Position Sensor Part Number: 12567648
$97.21 MSRP: $197.43
You Save: $100.22 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor; Crankshaft Sensor
- Replaces: 24508212, 10231684, 12550965
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.4 x 3.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12567648
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Malibu Submodels:
- Base, LS | 6 Cyl 3.1 L GAS
View related parts
2000 Chevrolet Malibu Crankshaft Position Sensor Part Number: 10456555
$36.47 MSRP: $74.07
You Save: $37.60 (51%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor; Crankshaft Sensor
- Replaces: 10456043
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.1 x 3.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10456555
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Malibu Submodels:
- Base, LS | 6 Cyl 3.1 L GAS

2000 Chevrolet Malibu Crankshaft Position Sensor

With a comprehensive array of OEM 2000 Chevrolet Malibu Crankshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Malibu Crankshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Malibu Crankshaft Position Sensor Parts and Q&A

Q: How to replace the Crankshaft Position Sensor (24X) on 2000 Chevrolet Malibu?
A: Remove the 24x crankshaft position (CKP) sensor. To do that, first turn off the ignition, and then remove the serpentine Drive Belt from the Crankshaft Pulley. Put the car up on a hoist and take off the crankshaft Harmonic Balancer. Take note of the routing of the sensor harness before unwinding, then pull off the harness retaining clip then pull off the bolt then pull off the sensor electrical connector, then remove the bolts to clear the sensor. For installation, install the 24x Crankshaft Position Sensor and fasten it using bolts with the harness routed as specified during removal. Mount the harness retaining clip with the bolt and tighten the bolts to 10 n.m (8 lb ft). Then connect to the sensor electrical connector, install the balancer back at the crankshaft, lower the vehicle and fit in the serpentine drive. Lastly, complete the ckp system variation learn procedure.