How to service the MAP Sensor on 2000 Chevrolet Malibu?

To service the Manifold Absolute Pressure (MAP) Sensor, switch-off the ignition first. Then, disconnection of the electrical connector and taking out of the MAP sensor vacuum line. Next, loosen the bolts then extract the MAP sensor. To install it, bolts are installed first, the vacuum line next, and the electrical connector installed last.

OEM 2000 Chevrolet Malibu MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2000 Chevrolet Malibu M.A.P. Sensor, Green, Passenger Side Part Number: 12569240
$66.22 MSRP: $112.74
You Save: $46.52 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Manifold Absolute Pressure Sensor; MAP Sensor; Pressure Sensor; Manifold Pressure Sensor; Emission Control Sensors (Vehicle Speed, Oxygen)
- Position: Passenger Side
- Replaces: 16254719, 16137039
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.2 x 3.0 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12569240
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Malibu Submodels:
- Base, LS | 6 Cyl 3.1 L GAS

2000 Chevrolet Malibu MAP Sensor

With a comprehensive array of OEM 2000 Chevrolet Malibu MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Malibu MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Malibu MAP Sensor Parts and Q&A

Q: How to service the MAP Sensor on 2000 Chevrolet Malibu?
A: To service the Manifold Absolute Pressure (MAP) Sensor, switch-off the ignition first. Then, disconnection of the electrical connector and taking out of the MAP sensor vacuum line. Next, loosen the bolts then extract the MAP sensor. To install it, bolts are installed first, the vacuum line next, and the electrical connector installed last.