OEM 2000 Chevrolet Impala Air Bag Clockspring

2000 Chevrolet Impala Air Bag Clockspring Parts and Q&A

• Q: How to replace the Air Bag Clockspring on 2000 Chevrolet Impala?

  A: Disabling the sir system, replace the air bag clock spring. After that, remove the air bag Steering Wheel module and remove the upper and lower steering column shrouds. Next, you need to withdraw the Steering Wheel and disconnect the 8 way inline connector c205 at the base of the steering column. Pull the wire harness straps off from the Steering Wheel column wire harness then remove the retaining ring and remove the air bag Steering Wheel module from the Steering Shaft. In the case of installation, position the new air bag Steering Wheel module on the Steering Shaft and fasten it using the retaining ring. Control route the lower coil wire harness down the steering column and install the required wiring harness straps before the 8-way inline connector c205 hook up. Reinstall the Steering Wheel, the upper and lower steering column shroud, and the air bag Steering Wheel module in the end. When everything is set into place, you can activate the sir system.