How to service the MAP Sensor on 2000 Chevrolet Corvette?

To maintain the MAP Sensor, loosen the PCV heat exchange cable fastener and hoses and disconnect the PCV hose assembly. Then disconnect the MAP sensor harness and take out the fuel rail assembly. The MAP sensor should be pulled forward, its seal checked, and attached. After that reassemble the parts.

OEM 2000 Chevrolet Corvette MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2000 Chevrolet Corvette M.A.P. Sensor Part Number: 19418807
$76.01 MSRP: $129.40
You Save: $53.39 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Manifold Absolute Pressure Sensor; MAP Sensor
- Replaces: 12614970, 16212460
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19418807
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2000 Chevrolet Corvette Submodels:
- 427 Limited Edition Z06, 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 7.0 L GAS

2000 Chevrolet Corvette MAP Sensor

With a comprehensive array of OEM 2000 Chevrolet Corvette MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Corvette MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Corvette MAP Sensor Parts and Q&A

Q: How to service the MAP Sensor on 2000 Chevrolet Corvette?
A: To maintain the MAP Sensor, loosen the PCV heat exchange cable fastener and hoses and disconnect the PCV hose assembly. Then disconnect the MAP sensor harness and take out the fuel rail assembly. The MAP sensor should be pulled forward, its seal checked, and attached. After that reassemble the parts.