OEM 2000 Buick Regal Ignition Control Module

2000 Buick Regal Ignition Control Module Parts and Q&A

• Q: How to service the Ignition Control Module on 2000 Buick Regal?

  A: You should begin Ignition Control Module servicing by shutting off the ignition then detaching the 14-way connector which relays power to the module. Kelvin move the Spark Plug Wires from the coil assemblies while keeping track of their starting positions. Screw out the 6 holding screws which attach the coil assemblies to the Ignition Control Module before removing the coils from their housing. First remove the mounting bracket's washers and nuts followed by extracting the Ignition Control Module away from the bracket. The installation process requires attaching coils to the module bracket with 6 ignition coil attaching screws. Tighten the screws to a torque of 4-5 n.m (40 lb in). Secure the Ignition Control Module assembly to the mounting bracket by installing nuts and washers before tightening them to 8 n.m (70 lb in). Connect the Spark Plug Wires together along with the 14-way connector to the module for final installation.