How to service the camshaft position sensor on 2000 Buick Regal?

Service of the Camshaft Position Sensor begins with ignition shut-off followed by disconnecting the electrical connector from the sensor. The service of Camshaft Position Sensor begins with removing its retaining screw before you extract the sensor from the engine front cover. The installation process requires the sensor to be placed onto the engine front cover following the Fastener Notice in Service Precautions. First connect the electrical connector to the camshaft position sensor before tightening the retaining bolt to 5 N.m (44 lb in).

OEM 2000 Buick Regal Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2000 Buick Regal Camshaft Position Sensor Part Number: 10456148
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Crankshaft Position Sensor; Crankshaft Sensor; Camshaft Sensor
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.3 x 2.3 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10456148
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick Regal Submodels:
- 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS

2000 Buick Regal Camshaft Position Sensor

With a comprehensive array of OEM 2000 Buick Regal Camshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Buick Regal Camshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Buick Regal Camshaft Position Sensor Parts and Q&A

Q: How to service the camshaft position sensor on 2000 Buick Regal?
A: Service of the Camshaft Position Sensor begins with ignition shut-off followed by disconnecting the electrical connector from the sensor. The service of Camshaft Position Sensor begins with removing its retaining screw before you extract the sensor from the engine front cover. The installation process requires the sensor to be placed onto the engine front cover following the Fastener Notice in Service Precautions. First connect the electrical connector to the camshaft position sensor before tightening the retaining bolt to 5 N.m (44 lb in).