Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 24232325
Extension Housing Seal, Rear

1994-2014 GM

Customer Questions & Expert Answers (23)
GM 24232325 Extension Housing Seal, Rear
GM 24232325 Extension Housing Seal, Rear
GM 24232325 Extension Housing Seal, Rear
GM 24232325 Extension Housing Seal, Rear
GM 24232325 Extension Housing Seal, Rear
GM 24232325 Extension Housing Seal, Rear
  • Part Description
    Seal, Rear Bearing Retaining; Automatic Transmission Extension Housing Seal; Transmission Seal
  • Position
    Rear
  • Replaces
    24201470
  • Manufacturer
    General Motors
Make sure this part fits
$14.64 MSRP: $24.12
You Save: $9.48 (40%)
Ships in 1-2 Business Days
1
ADD TO CART
  • 2011 Chevy Express 2500 Extension Housing Seal, Rear Diagram for 24232325
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 24232325

  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    1994-2005 Chevrolet AstroBase, CL, CS, LS, LT6 Cyl 4.3 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, On Road Edition, WBH, Z668 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LT8 Cyl 8.1 L GAS
    1996-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    1997-1998 Chevrolet CorvetteBase, Indianapolis 500 Pace Car8 Cyl 5.7 L GAS
    2003-2014 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2014 Chevrolet Express 2500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2003-2014 Chevrolet Express 3500Base, LS, LT8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 24232325 is the right part for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 24232325 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What should be done after raising it for the 2007 Buick Rainier? Posted by Customer
    A:
    Remove the transfer case assembly while ensuring not to damage the sealing surfaces of the transfer cases or the shafts.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Transfer Case Seal
    Q:
    How do you remove the input shaft seal for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Use a flat-tipped screwdriver to remove the input shaft seal.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Transfer Case Seal
    Q:
    What tool is used to protect the front output shaft during installation for the 2001 Chevrolet Astro? Posted by Customer
    A:
    The Front Output Shaft Seal Protector (J 44636-2).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Transfer Case Seal
    Q:
    What should be done after installing the rear output shaft seal for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Reinstall the rear propeller shaft, check the transfer case fluid level, then replace the transfer case shield and lower the vehicle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Transfer Case Seal
    Q:
    What is the process for installing a new output shaft bushing for the 2005 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Use the Transfer Case Rear Bushing Remover and Installer (J 45380) to position the bushing and tool to the case, then use a hammer to install it, ensuring the drain hole on the boot of the rear output shaft seal is facing down.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Transfer Case Seal
    Q:
    What is the process for installing a new output shaft bushing for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Use the Transfer Case Rear Bushing Remover and Installer (J 45380) to position the bushing and tool to the case, then use a hammer to install it, ensuring the drain hole on the boot of the rear output shaft seal is facing down toward the ground.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Transfer Case Seal
    Q:
    What should be removed after raising for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    Remove the rear propeller shaft.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Transfer Case Seal
    Q:
    What tools are needed for the installation of the seal for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Attach the Output Shaft Seal Installer (J 43484) to the Driver Handle (J 8092).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Transfer Case Seal
    Q:
    What components need to be taken out next for the 2002 Chevrolet S10? Posted by Customer
    A:
    Take out the transfer case front output shaft dust seal and the front output shaft seal.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Transfer Case Seal
    Q:
    How do you install a new front output shaft seal for the 2005 Chevrolet Tahoe? Posted by Customer
    A:
    Use the Seal Installer (J 37668-A) to install the new front output shaft seal.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Transfer Case Seal
    Q:
    How should the front output shaft seal be removed for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Start with the inner sleeve of the seal to facilitate its removal from the transfer case, followed by the outer area of the seal.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Transfer Case Seal
    Q:
    What is the first step to replace the rear output shaft seal for the 2010 Chevrolet Silverado 1500? Posted by Customer
    A:
    Raise and suitably support the vehicle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Transfer Case Seal
    Q:
    What is the process for installing the new input shaft seal for the 2003 Chevrolet Trailblazer? Posted by Customer
    A:
    Align the new input shaft seal on the input shaft and use the J42738 Seal Installer to install the seal.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Transfer Case Seal
    Q:
    How do you remove the front output shaft seal for the 2007 GMC Envoy? Posted by Customer
    A:
    Lightly tap a screwdriver around the edge of the front output shaft seal to pry it out.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Transfer Case Seal
    Q:
    What is the first step to replace the front output shaft seal of the transfer case for the 2000 GMC Jimmy? Posted by Customer
    A:
    First, raise the vehicle and, if equipped, remove the transfer case shields.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Transfer Case Seal
    Q:
    What should be done if a new rear output shaft bushing is needed for the 2005 GMC Safari? Posted by Customer
    A:
    Use the J 45380 to position the bushing and tool to the case, and install the bushing with a hammer.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Transfer Case Seal
    Q:
    What is the final step in the process for the 2008 GMC Sierra 1500? Posted by Customer
    A:
    Reinstall the transfer case shield if equipped and lower the vehicle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Transfer Case Seal
    Q:
    What should be removed after raising for the 2010 GMC Savana 1500? Posted by Customer
    A:
    Remove the transfer case from the adapter.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Transfer Case Seal
    Q:
    What is the final step after installing the new input shaft seal for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Reinstall the transfer case.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Transfer Case Seal
    Q:
    How do you remove the inner part of the seal for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Use a flat-tipped screwdriver to pry back the inner race, then insert a small pry bar to remove the inner part of the seal.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Transfer Case Seal
    Q:
    What is the first step to replace the rear transfer case output shaft seal for the 2005 GMC Yukon? Posted by Customer
    A:
    Remove the transfer case shield if equipped, followed by the rear propeller shaft.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Transfer Case Seal
    Q:
    How should the new input shaft seal be installed for the 2003 GMC Sonoma? Posted by Customer
    A:
    Ensure that the part numbers on the seal are facing outward toward the technician.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Transfer Case Seal
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Extension Housing Seal, Rear 24232325 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 24232325 Extension Housing Seal, Rear is available in the market under the name GM Transfer Case Seal, Transmission Gasket, Automatic Transmission Seal. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 24232325 Extension Housing Seal, Rear fits certain Chevrolet S10, Tahoe, SSR models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade and Buick Rainier models.
The original GM component designated by Manufacturer Part Number 24232325 maintains top performance when functioning as the Seal, Rear Bearing Retaining; Automatic Transmission Extension Housing Seal; Transmission Seal unit at its Rear. The component 24232325 is constructed from durable material and its dimensions span 3.7 x 3.8 x 1.7 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Seal, Transmission Rear Main Bearing; Seal, Transmission Extension. The part 24232325 has available replacement options 24201470. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.