Make sure this part fits

GM 12625986
Camshaft

2007-2011 GM

Customer Questions & Expert Answers (12)
GM 12625986 Camshaft
GM 12625986 Camshaft
  • Part Description
    Camshaft Assembly-Intake
  • Replaces
    12632193, 12604377, 12603544, 12609250
  • Manufacturer
    General Motors
Make sure this part fits
$28.90 MSRP: $45.26
You Save: $16.36 (37%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2011 Buick EnclaveCX, CXL6 Cyl 3.6 L GAS
    2010-2011, 2008 Buick LaCrosseCX, CXL, CXS6 Cyl 3.0 L GAS, 6 Cyl 3.6 L GAS
    2008-2011 Cadillac CTSBase, Luxury, Performance, Premium6 Cyl 3.0 L GAS, 6 Cyl 3.6 L GAS
    2007-2010 Cadillac SRXBase, Luxury, Performance, Premium6 Cyl 3.0 L GAS, 6 Cyl 3.6 L GAS
    2008-2011 Cadillac STSBase, Platinum6 Cyl 3.6 L GAS
    2010-2011 Chevrolet CamaroLS, LT6 Cyl 3.6 L GAS
    2008-2011 Chevrolet EquinoxLT, LTZ, Sport6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L GAS
    2008-2011 Chevrolet MalibuLT, LTZ6 Cyl 3.6 L GAS
    2009-2011 Chevrolet TraverseLS, LT, LTZ6 Cyl 3.6 L GAS
    2007-2011 GMC AcadiaDenali, SL, SLE, SLT6 Cyl 3.6 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12625986 designed for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 12625986 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What is the first step to replace the camshaft on the right side (LP1, LY7) for the 2008 Buick LaCrosse? Posted by Customer
    A:
    Begin by removing the upper intake manifold along with the lower intake manifold.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Camshaft
    Q:
    What components need to be taken out next for the 2008 Buick Enclave? Posted by Customer
    A:
    The camshaft sensors and the camshaft position actuator solenoid.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Camshaft
    Q:
    What should be ensured about the camshaft flats during rotation for the 2008 Cadillac CTS? Posted by Customer
    A:
    Ensure the camshaft flats are parallel with the camshaft cover rail.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Camshaft
    Q:
    What is the first step to replace the left side camshaft for the 2008 Cadillac STS? Posted by Customer
    A:
    Begin by removing the intake manifold and the left bank camshaft cover.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Camshaft
    Q:
    How do you insert the EN-48313 tool for the 2009 Cadillac SRX? Posted by Customer
    A:
    Insert it between the camshaft actuators, ensuring the bottom line of the tool is adjacent to the top surface of the cylinder head.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Camshaft
    Q:
    What is the final step in the installation process for the 2010 Chevrolet Camaro? Posted by Customer
    A:
    Remove the EN-48313, install the crankshaft balancer, and use an open-end wrench to prevent rotation. Finally, install and tighten the camshaft position actuators, intake camshaft position actuator solenoids, camshaft sensors, camshaft cover, and lower intake manifold.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Camshaft
    Q:
    What is the first step to replace the camshaft rear bearing hole plug for the 2009 Chevrolet Equinox? Posted by Customer
    A:
    Remove the engine flywheel.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Camshaft
    Q:
    What is the next step after removing the camshaft roller followers for the 2008 Chevrolet Malibu? Posted by Customer
    A:
    Remove the hydraulic element lash adjusters.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Camshaft
    Q:
    What should be removed after the intake manifold for the 2009 Chevrolet Traverse? Posted by Customer
    A:
    The left bank camshaft cover.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Camshaft
    Q:
    What should be done after hand tightening the EN-48313 for the 2009 GMC Acadia? Posted by Customer
    A:
    Use an open-end wrench on its hex to further tighten the T-handle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Camshaft
    Q:
    What should be done with used roller followers for the 2010 GMC Terrain? Posted by Customer
    A:
    They must be returned to their original positions on the camshaft.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Camshaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Camshaft 12625986 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12625986 Camshaft is available in the market under the name GM Camshaft. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12625986 Camshaft fits certain Chevrolet Malibu, Camaro, Equinox models, as well as GMC Acadia, Terrain. Additionally, it is compatible with Cadillac CTS, SRX, STS and Buick Enclave, LaCrosse models.
The original GM component designated by Manufacturer Part Number 12625986 maintains top performance when functioning as the Camshaft Assembly-Intake unit. The component 12625986 is constructed from durable material and its dimensions span 3.3 x 3.4 x 28.1 inches while weighing 4.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Camshaft, Engine. The part 12625986 has available replacement options 12632193, 12604377, 12603544, 12609250. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.