How to remove and install the rear Sway Bar Kit on Pontiac Firebird?

The rear Sway Bar Kit is an optional component and may not be present on all vehicles. Begin by raising the vehicle and securely supporting it on jackstands. Next, remove the link bolt, nut, grommets, spacer, and retainers from each side of the Sway Bar Kit, taking note of their positions for easier reinstallation. Proceed to take off the insulator and bracket from each side of the Sway Bar Kit, again noting their positions. After that, remove the Sway Bar Kit itself. For installation, reverse the removal steps while applying multi-purpose grease to the insulator mounting points on the Sway Bar Kit before placing the insulators and brackets. Ensure that the slits in the insulators face the front of the vehicle and confirm that the Sway Bar Kit is centered in the brackets prior to tightening the mounting bolts. Finally, tighten all bolts to the specified torque.

OEM Pontiac Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

112 Sway Bar Kits found

View related parts
Pontiac Stabilizer Bar, Front Part Number: 22706290
$96.20 MSRP: $150.68
You Save: $54.48 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Front Stabilizer; Sway Bar
- Position: Front
Fits the following Pontiac Models:
- G6 | 2005 | GT | 6 Cyl 3.5 L GAS
View related parts
Pontiac Stabilizer Bar Part Number: 10097840
Product Specifications
- Other Name: Shaft, Stabilizer; Sway Bar
- Position: Rear Upper
Fits the following Pontiac Models:
- Grand Am | 1992-1994 | GT, SE | 4 Cyl 2.3 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS
View related parts
Pontiac Stabilizer Bar Part Number: 10346886
Product Specifications
- Other Name: Shaft, Stabilizer; Sway Bar
- Position: Front
- Replaces: 88955453
Fits the following Pontiac Models:
- Grand Prix | 2004-2008 | Base, GT, GT1, GT2, GTP, GXP | 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
Pontiac Stabilizer Bar Part Number: 10257316
Product Specifications
- Other Name: Shaft, Stabilizer; Suspension Stabilizer Bar Kit; Stabilizer Bar Kit; Sway Bar
- Position: Front
Fits the following Pontiac Models:
- Montana | 1999-2005 | Base | 6 Cyl 3.4 L GAS
- Trans Sport | 1997-1998 | Base, Montana | 6 Cyl 3.4 L GAS
View related parts
Pontiac Stabilizer Bar Part Number: 25919079
Product Specifications
- Other Name: Shaft, Stabilizer; Sway Bar
- Position: Front
- Replaces: 15224873
Fits the following Pontiac Models:
- Solstice | 2007-2009 | Base, GXP | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Pontiac Stabilizer Bar Part Number: 25649664
Product Specifications
- Other Name: Shaft, Stabilizer; Sway Bar
- Position: Front
Fits the following Pontiac Models:
- Bonneville | 2005 | GXP, SE, SLE | 6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS
View related parts
Pontiac Stabilizer Bar Part Number: 10413385
Product Specifications
- Other Name: Shaft, Stabilizer; Suspension Stabilizer Bar Kit; Stabilizer Bar Kit; Sway Bar
- Position: Front
Fits the following Pontiac Models:
- Aztek | 2001-2005 | Base, GT, Rally | 6 Cyl 3.4 L GAS
View related parts
Pontiac Stabilizer Bar, Front Part Number: 19204095
Product Specifications
- Other Name: Shaft, Front Stabilizer; Sway Bar; Shaft, Stabilizer
- Position: Front
- Replaces: 88972906
Fits the following Pontiac Models:
- Vibe | 2003-2010 | AWD, Base, GT | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
View related parts
Pontiac Stabilizer Bar, Front Part Number: 15822933
Product Specifications
- Other Name: Shaft, Front Stabilizer; Suspension Stabilizer Bar Kit; Stabilizer Bar Kit; Sway Bar; Shaft, Stabilizer
- Position: Front
- Replaces: 10392766
Fits the following Pontiac Models:
- G5 | 2007-2009 | Base, GT | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Pontiac Stabilizer Bar Part Number: 14076608
Product Specifications
- Other Name: Shaft; Sway Bar; Shaft, Stabilizer
Fits the following Pontiac Models:
- J2000 Sunbird | 1985 | Base, LE | 4 Cyl 2.0 L GAS
- Sunbird | 1986-1987 | Base, GT, SE | 4 Cyl 2.0 L GAS
View related parts
Pontiac Stabilizer Bar Part Number: 25640414
Product Specifications
- Other Name: Shaft; Sway Bar; Shaft, Stabilizer
Fits the following Pontiac Models:
- Bonneville | 2000-2005 | GXP, SE, SLE, SSEi | 6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS
View related parts
Pontiac Stabilizer Bar Part Number: 25640436
Product Specifications
- Other Name: Shaft; Sway Bar; Shaft, Stabilizer
Fits the following Pontiac Models:
- Bonneville | 2001-2003 | SE, SLE, SSEi | 6 Cyl 3.8 L GAS
View related parts
Pontiac Stabilizer Bar Part Number: 90216617
Product Specifications
- Other Name: Shaft; Stabilizer Shaft; Shaft, Stabilizer
Fits the following Pontiac Models:
- LeMans | 1988-1993 | Aerocoupe, Aerocoupe YL, Base, GSE, LE, SE, Value Leader | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS
View related parts
Pontiac Stabilizer Bar Part Number: 90305346
Product Specifications
- Other Name: Shaft; Sway Bar; Shaft, Stabilizer
Fits the following Pontiac Models:
- LeMans | 1989-1993 | GSE, LE, SE, Value Leader | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS
View related parts
Pontiac Stabilizer Bar Part Number: 88970155
Product Specifications
- Other Name: Shaft, Stabilizer; Sway Bar
- Position: Rear
Fits the following Pontiac Models:
- Vibe | 2003-2006 | Base, GT | 4 Cyl 1.8 L GAS
View related parts
Pontiac Stabilizer Bar Part Number: 15776367
Product Specifications
- Other Name: Shaft, Stabilizer; Sway Bar
- Position: Rear
Fits the following Pontiac Models:
- Torrent | 2007-2009 | Base, GXP | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
View related parts
Pontiac Stabilizer Bar Part Number: 10035033
Product Specifications
- Other Name: Shaft, Stabilizer; Sway Bar
- Position: Rear
Fits the following Pontiac Models:
- Firebird | 1984-1992 | Base, Formula, S/E, Trans Am, Trans Am GTA, Trans Am GTA SE | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Pontiac Stabilizer Bar Part Number: 22536984
Product Specifications
- Other Name: Shaft, Stabilizer; Sway Bar
- Position: Front
Fits the following Pontiac Models:
- Grand Am | 1988-1993 | Base, GT, LE, SE | 4 Cyl 2.3 L GAS, 6 Cyl 3.3 L GAS
View related parts
Pontiac Stabilizer Bar Part Number: 25536658
Product Specifications
- Other Name: Shaft, Stabilizer; Sway Bar
- Position: Rear
Fits the following Pontiac Models:
- Bonneville | 1990-1991 | LE, SE, SSE | 6 Cyl 3.8 L GAS
View related parts
Pontiac Stabilizer Bar Part Number: 88974416
Product Specifications
- Other Name: Shaft, Stabilizer; Sway Bar
- Position: Rear
- Replaces: 88972247
Fits the following Pontiac Models:
- Vibe | 2003-2008 | Base, GT | 4 Cyl 1.8 L GAS

| Page 1 of 6 |Next >

1-20 of 112 Results

Pontiac Sway Bar Kit

Choose OEM Sway Bar Kit, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Pontiac's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Pontiac Sway Bar Kit. You can shop at highly competitive prices and protect your budget. All our genuine Pontiac parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Pontiac Sway Bar Kit cuts body roll and grips sharpening on all sharp corners. Pontiac based its reputation on broad-track handling, eye-catching styling and a seat-of-the-pants exuberance that never felt diluted, and provided drivers with cars that looked more aggressive and cornered smoother than the vanilla sedans that jammed the motorway. The brand continued to put jaws in the air by fitting spirited engines into affordable prices, shedding weight where it counts, and adopting the cabin designs that put driving gauges and shifters in the hands of spirited hands, making weekend thrashes as comfortable as daily commuting. The tuning of suspension, fast steering ratios and a ravenous exhaust note transformed ordinary commutes into mini-rebellion. Pontiac remained laser-guided on fun and control by decades of Firebirds, Grand Ams and dozens of street cruisers, not letting comfort blur their responsiveness and flash obscure the raw driving beat that enthusiastic devotees demand. Within that spirit, Sway Bar Kit connects conflicting wheels, a torsion bar, which reacts to body lean and transfers force cross-axially, maintains vertical spring rates, and bites the tires into the road more aggressively so that the cabin remains straight even when curves and potholes converge simultaneously. Since the Pontiac Sway Bar Kit does not add harshness to the car, but only increases the roll stiffness, drivers attacking down an off-ramp on a cambered off-ramp feel planted and not thrown. The driving community likes the fact that the Sway Bar Kit is made of robust coils and contemporary variable control features that can easily fit under the car chassis and can be applied with existing suspension components to give a driver the immediate confidence boost.

Pontiac Sway Bar Kit Parts and Q&A

Stabilizer Bar
10021220
Q: How to remove and install the rear Sway Bar Kit on Pontiac Firebird?
A:
The rear Sway Bar Kit is an optional component and may not be present on all vehicles. Begin by raising the vehicle and securely supporting it on jackstands. Next, remove the link bolt, nut, grommets, spacer, and retainers from each side of the Sway Bar Kit, taking note of their positions for easier reinstallation. Proceed to take off the insulator and bracket from each side of the Sway Bar Kit, again noting their positions. After that, remove the Sway Bar Kit itself. For installation, reverse the removal steps while applying multi-purpose grease to the insulator mounting points on the Sway Bar Kit before placing the insulators and brackets. Ensure that the slits in the insulators face the front of the vehicle and confirm that the Sway Bar Kit is centered in the brackets prior to tightening the mounting bolts. Finally, tighten all bolts to the specified torque.