How to remove and install a front shock absorber on Oldsmobile Omega?

Raise the front of the car and support it on jackstands. Remove the wheel. Make a mark on the cam bolt to retain the same camber adjustment upon installation. Loosen, but do not yet remove the strut-to-steering knuckle bolts. Loosen, but do not yet remove the 3 bolts that secure the top of the strut assembly to the shock well, underneath the hood. Disconnect the brake line clip from its mounting tab on the strut. Remove all of the loosened bolts and lift out the strut damper assembly. Be careful not to damage the rubber drive axle boot located below the assembly during removal. To install, position the strut damper assembly in its proper location and install its upper and lower mounting bolts. Place a jack under the hub and disc brake rotor assembly to hold it in position. Lower the car enough to set the cam adjuster in its position. Install the brake line clip to its mounting tab on the front strut. Torque all the strut damper assembly mounting bolts to specs. Install the wheel and lower the car. If the strut damper assembly has been replaced, a front end alignment is necessary.

OEM Oldsmobile Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

120 Shock Absorbers found

View related parts
Oldsmobile Shock Absorber Part Number: 88945177
$58.76 MSRP: $104.92
You Save: $46.16 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber, Front Shock; Shock
- Position: Front
- Replaces: 12322202, 22064421, 22046455, 22046424, 22064601, 22065201, 22064298
Fits the following Oldsmobile Models:
- 98 | 1987 | Regency, Regency Grande, Regency Touring | 6 Cyl 3.8 L GAS
- Custom Cruiser | 1985-1992 | Base | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
- Delta 88 | 1985 | Royale, Royale Brougham, Royale Brougham LS | 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View More
View related parts
Oldsmobile Strut, Front Part Number: 22047912
$81.26 MSRP: $147.07
You Save: $65.81 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Assembly, Front Suspension; Shock Absorber
- Position: Front
- Replaced by: 88945825
Fits the following Oldsmobile Models:
- Firenza | 1984 | Base, Brougham LX, Brougham SX, Cruiser, Cruiser LX, Cruiser SX, ES, GT, LX, S, SX | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
View related parts
Oldsmobile Shock Absorber, Front Part Number: 4993745
$36.24 MSRP: $64.72
You Save: $28.48 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly-Front Shock
- Position: Front
- Replaced by: 88946013
Fits the following Oldsmobile Models:
- 98 | 1984 | Regency, Regency Brougham | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
- Custom Cruiser | 1984 | Base | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
- Delta 88 | 1984 | Royale, Royale Brougham, Royale Brougham LS | 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View More
View related parts
Oldsmobile Shock Absorber Part Number: 88986629
$56.22 MSRP: $104.92
You Save: $48.70 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Front Shock; Suspension Shock Absorber; Shock; Absorber, Front And Rear Suspension
- Position: Front
- Replaced by: 88945177
- Replaces: 22064042, 22064264, 22064412, 22064618, 22046456
Fits the following Oldsmobile Models:
- Custom Cruiser | 1990 | Base | 8 Cyl 5.0 L GAS
View related parts
Oldsmobile Strut Part Number: 88985523
$70.65 MSRP: $126.15
You Save: $55.50 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Assembly, Rear Suspension; Shock Absorber
- Position: Rear
Fits the following Oldsmobile Models:
- Alero | 1999-2002 | GL, GLS, GX | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.4 L GAS
View related parts
Oldsmobile Shock Absorber Part Number: 88945187
$33.01 MSRP: $58.95
You Save: $25.94 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Rear Shock; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Replaces: 22064494, 22064495, 12322242, 22064610, 22065229
Fits the following Oldsmobile Models:
- Cutlass Ciera | 1984-1996 | Base, Brougham, Cruiser LS, ES, GT, Holiday, International, LS, S, SL | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
- Cutlass Cruiser | 1987-1994 | Base, Brougham, Brougham LS, LS, S, SL, Special Edition | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
- Silhouette | 1990-1996 | Base | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View More
View related parts
Oldsmobile Shock Absorber, Rear Part Number: 22003326
$146.99 MSRP: $266.04
You Save: $119.05 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Rear Leveling Shock
- Position: Rear
Fits the following Oldsmobile Models:
- Toronado | 1984-1985 | Brougham, Caliente | 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Oldsmobile Shock Absorber Part Number: 88945188
$48.44 MSRP: $86.50
You Save: $38.06 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber, Rear Shock; Shock
- Position: Rear
- Replaces: 22064413, 22064299, 22064856, 22064265, 22046428, 22064422, 22064043, 22064101, 22046810
Fits the following Oldsmobile Models:
- 98 | 1987, 1984 | Regency, Regency Brougham, Regency Grande, Regency Touring | 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
- Custom Cruiser | 1991-1992 | Base | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- Delta 88 | 1984-1985 | Royale, Royale Brougham, Royale Brougham LS | 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View More
View related parts
Oldsmobile Shock Absorber, Front Part Number: 4993587
$42.57 MSRP: $79.94
You Save: $37.37 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly-Front Shock
- Position: Front
- Replaced by: 22065203
Fits the following Oldsmobile Models:
- Toronado | 1984-1985 | Brougham, Caliente | 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Oldsmobile Strut Part Number: 22047944
$72.95 MSRP: $136.99
You Save: $64.04 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber
- Replaced by: 22047964
Fits the following Oldsmobile Models:
- Toronado | 1986-1989 | Base, Brougham, Trofeo | 6 Cyl 3.8 L GAS
View related parts
Oldsmobile Shock Absorber, Front Part Number: 15098725
Product Specifications
- Other Name: Front Shock Absorber Kit; Suspension Assembly; Air Spring to Coil Conversion; Complete Strut Set; Strut; Absorber, Front And Rear Suspension; Shock
- Position: Front
- Replaces: 15063734
Fits the following Oldsmobile Models:
- Bravada | 2002-2004 | Base | 6 Cyl 4.2 L GAS
View related parts
Oldsmobile Shock Absorber, Front Part Number: 22064445
Product Specifications
- Other Name: Absorber, Front Shock; Shock; Absorber, Front And Rear Suspension
- Position: Front
Fits the following Oldsmobile Models:
- Bravada | 1996-2001, 1992-1994 | Base | 6 Cyl 4.3 L GAS
View related parts
Oldsmobile Shock Absorber, Front Part Number: 22064855
Product Specifications
- Other Name: Absorber, Front Shock; Suspension Shock Absorber; Shock; Absorber, Front And Rear Suspension; Absorber, Rear Shock
- Position: Front
- Replaces: 22064447, 22064283, 22065051
Fits the following Oldsmobile Models:
- Bravada | 1996-2001 | Base | 6 Cyl 4.3 L GAS
View related parts
Oldsmobile Shock, Front Part Number: 12477880
Product Specifications
- Other Name: Absorber Kit, Front Shock; Suspension Shock Absorber; Shock Absorber; Absorber Kit, Front And Rear Suspension
- Position: Front
- Replaces: 22165192, 22165713
Fits the following Oldsmobile Models:
- Bravada | 1996-1998 | Base | 6 Cyl 4.3 L GAS
View related parts
Oldsmobile Shock Absorber, Front Part Number: 12477891
Product Specifications
- Other Name: Absorber Kit, Front Shock; Suspension Shock Absorber; Shock; Absorber Kit, Front And Rear Suspension
- Position: Front
- Replaces: 22165191, 22165711
Fits the following Oldsmobile Models:
- Bravada | 1996-1999, 1992-1994 | Base | 6 Cyl 4.3 L GAS
View related parts
Oldsmobile Shock Part Number: 22064274
Product Specifications
- Other Name: Absorber, Front And Rear Suspension; Shock Absorber
- Position: Front
Fits the following Oldsmobile Models:
- Bravada | 1991-1994 | Base | 6 Cyl 4.3 L GAS
View related parts
Oldsmobile Shock Absorber, Rear Part Number: 12474693
Product Specifications
- Other Name: Absorber Kit, Rear Shock; Absorber Kit, Front And Rear Suspension
- Position: Rear
- Replaces: 12474910
Fits the following Oldsmobile Models:
- Bravada | 1999-2000 | Base | 6 Cyl 4.3 L GAS
View related parts
Oldsmobile Shock Absorber, Rear Part Number: 12477893
Product Specifications
- Other Name: Absorber Kit, Rear Shock; Suspension Shock Absorber; Absorber Kit, Front And Rear Suspension; Shock
- Position: Rear
- Replaces: 22165706, 22165161
Fits the following Oldsmobile Models:
- Bravada | 1996-1998 | Base | 6 Cyl 4.3 L GAS
View related parts
Oldsmobile Shock Absorber, Front Part Number: 12474688
Product Specifications
- Other Name: Absorber Kit, Front Shock; Suspension Shock Absorber; Shock; Absorber Kit, Front And Rear Suspension
- Position: Front
- Replaces: 22152120
Fits the following Oldsmobile Models:
- Bravada | 2002, 1999 | Base | 6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Oldsmobile Strut, Front Part Number: 22064770
$185.31 MSRP: $332.40
You Save: $147.09 (45%)
Product Specifications
- Other Name: Strut, Front Suspension; Suspension Strut Assembly Kit; Complete Strut Kit; Complete Strut; Shock Absorber; Strut, Front And Rear Suspension
- Position: Front
Fits the following Oldsmobile Models:
- Alero | 2002-2003, 1999 | GL, GLS, GX | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.4 L GAS

| Page 1 of 6 |Next >

1-20 of 120 Results

Oldsmobile Shock Absorber

Choose OEM Shock Absorber, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Oldsmobile's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Oldsmobile Shock Absorber. You can shop at highly competitive prices and protect your budget. All our genuine Oldsmobile parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Oldsmobile Shock Absorber converts fierce bumps to some gentle ripples, keeping tires stuck and cabins composed. Oldsmobile also established itself by beating assembly lines early and then introducing the automatic shifting which enabled ordinary people to relax. Throughout decades, Oldsmobile pursued the goal of more comfortable rides and less noisy cabins, and it turned out that comfort could go hand in hand with mass production. Since the Curved Dash to subsequent sedans, Oldsmobile continued to perfect their powertrains and body strength to ensure safe traveling. Decade after decade, the brand added more sound insulation, tougher steel and more intelligent platform designs to make the highways work. Its commitment to everyday drivers saw innovations come fast and trickle down across all levels of the trim, not only the halo models. The Shock Absorber is contained within the suspension stack and incorporates twin-tube or mono-tube chambers full of hydraulic fluid that runs through specific valves to transform violent wheel motion into controlled heat and provide the chassis with predictable damping at any speed or load. A Shock Absorber is designed to fit either with passive twin-tube guts or smart magnetorheological fluid and it becomes stiff or soft in a short time to suit cornering forces, making steering feel as direct as possible and keeping body roll levels modest. The Shock Absorber works in combination with the anti-sway bar to stabilize the vehicle with the tires in the level position and the passengers firmly seated instead of bounced around.

Oldsmobile Shock Absorber Parts and Q&A

Strut
22035660
Q: How to remove and install a front shock absorber on Oldsmobile Omega?
A:
Raise the front of the car and support it on jackstands. Remove the wheel. Make a mark on the cam bolt to retain the same camber adjustment upon installation. Loosen, but do not yet remove the strut-to-steering knuckle bolts. Loosen, but do not yet remove the 3 bolts that secure the top of the strut assembly to the shock well, underneath the hood. Disconnect the brake line clip from its mounting tab on the strut. Remove all of the loosened bolts and lift out the strut damper assembly. Be careful not to damage the rubber drive axle boot located below the assembly during removal. To install, position the strut damper assembly in its proper location and install its upper and lower mounting bolts. Place a jack under the hub and disc brake rotor assembly to hold it in position. Lower the car enough to set the cam adjuster in its position. Install the brake line clip to its mounting tab on the front strut. Torque all the strut damper assembly mounting bolts to specs. Install the wheel and lower the car. If the strut damper assembly has been replaced, a front end alignment is necessary.