Is it more practical and economical to replace a faulty oil pump with a new or rebuilt unit, and what steps should be taken if an overhaul is chosen in V8 engine on Oldsmobile Cutlass?

Where possible, replacement of the faulty oil pump with a new or re-manufactured one is cheaper and more effective, but where an overhaul is decided on, one should find out on the availability of internal parts before starting. Starting, it is required to unscrew and remove the pump cover and the pump cover retaining screws, denoting the gear teeth for assembly. Subsequently, the idler gear, drive gear and shaft have to be removed from the body along with the pressure regulator valve retaining pin, the regulator valve and its related components are removed. If required, the pick-up screen and pipe assembly may be withdrawn from the pump body. Afterwards it is necessary to wash all the parts in some solvent and after that dry them up, checking the state of the body and especially gears for existence of cracks, wears, etc. Looseness between the pump body and drive gear shafts: check whether there is wear inside the pump cover to cause oil leakage. Most often, the pick-up screen and the pipe assembly must be examined for signs of wearing out. A gasket sealant should then be placed to the end of the pipe and the pipe tapped into the pump body without causing any damage; if the original press-fit is lost then the rear assembly must be used so as to counter air leaks and pressures loss. Mounting of the pressure regulator valve and other associated sub-assemblies, the drive gear and shaft arrangement in the pump body, the idler gear of the pump with the plain side towards the opening of the pump cover and the pump gears lubricated with engine oil. Last, bolt on the cover and power tighten the screws, thus rotating the driveshaft to check if the pump moves easily.

OEM Oldsmobile Oil Pump

Oil Fluid Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

23 Oil Pumps found

View related parts
Oldsmobile Oil Pump Part Number: 93442037
$167.05 MSRP: $275.17
You Save: $108.12 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump, Oil; Oil Pump Repair Kit; Pump, Engine Oil Pump
- Replaces: 12555283
Fits the following Oldsmobile Models:
- Bravada | 1996-2001 | Base | 6 Cyl 4.3 L GAS
View related parts
Oldsmobile Oil Pump Part Number: 93427692
$122.44 MSRP: $201.71
You Save: $79.27 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump, Oil; Water Pump; Pump Assembly; Pump, Engine Oil Pump
- Replaces: 12555884, 03848907, 3848907, 12555284
Fits the following Oldsmobile Models:
- Bravada | 1992-1994 | Base | 6 Cyl 4.3 L GAS
- Custom Cruiser | 1991-1992 | Base | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Oldsmobile Oil Pump Part Number: 24500960
$18.83 MSRP: $37.83
You Save: $19.00 (51%)
ADD TO CART
Product Specifications
- Other Name: Pump, Oil; Oil Pump Repair Kit; Pump, Engine Oil Pump
Fits the following Oldsmobile Models:
- 88 | 1992-1994 | Royale, Royale LS | 6 Cyl 3.8 L GAS
- 98 | 1992-1994 | Regency, Regency Elite, Touring | 6 Cyl 3.8 L GAS
- Achieva | 1992-1993 | S, SC, SL | 6 Cyl 3.3 L GAS
- Cutlass Ciera | 1992-1993 | Base, S, SL | 6 Cyl 3.3 L GAS
- Silhouette | 1992-1994 | Base | 6 Cyl 3.8 L GAS
- Toronado | 1992 | Base, Trofeo | 6 Cyl 3.8 L GAS
View More
View related parts
Oldsmobile Oil Pump Part Number: 88958981
$158.20 MSRP: $317.63
You Save: $159.43 (51%)
ADD TO CART
Product Specifications
- Other Name: Pump Kit, Oil; Oil Pump Repair Kit; Pump Kit, Engine Oil Pump
- Replaces: 24576315, 24577080
Fits the following Oldsmobile Models:
- Alero | 1999-2001 | GL, GLS, GX | 4 Cyl 2.4 L GAS
View related parts
Oldsmobile Oil Pump Part Number: 12518877
Product Specifications
- Other Name: Gear, Engine Oil Pump; Oil Pump Repair Kit; Gerotor Assembly; Pump Kit, Engine Oil Pump
Fits the following Oldsmobile Models:
- Cutlass Ciera | 1992 | Base | 4 Cyl 2.5 L GAS
View related parts
Oldsmobile Oil Pump Part Number: 12555384
Product Specifications
- Other Name: Pump, Engine Oil Pump; Oil Pump Repair Kit
- Replaces: 03539057, 3539057
Fits the following Oldsmobile Models:
- Aurora | 2001-2003, 1995-1999 | Base | 8 Cyl 4.0 L GAS
View related parts
Oldsmobile Water Pump Part Number: 89060444
Product Specifications
- Other Name: Pump, Engine Oil Pump; Oil Pump
- Replaces: 10229785, 12593581
Fits the following Oldsmobile Models:
- Achieva | 1994-1998 | S, SC, SL | 6 Cyl 3.1 L GAS
- Alero | 1999-2004 | GL, GLS, GX | 6 Cyl 3.4 L GAS
- Cutlass | 1997-1999 | Base, GL, GLS | 6 Cyl 3.1 L GAS
- Cutlass Ciera | 1994-1996 | Base, S, SL | 6 Cyl 3.1 L GAS
- Cutlass Supreme | 1993-1997 | Base, S, SL | 6 Cyl 3.1 L GAS
- Silhouette | 1996-2004 | Base, GL, GLS, GS, Premiere | 6 Cyl 3.4 L GAS
View More
View related parts
Oldsmobile Oil Pump Part Number: 22524576
Product Specifications
- Other Name: Pump, Engine Oil Pump; Oil Pump Repair Kit
Fits the following Oldsmobile Models:
- Toronado | 1984-1985 | Brougham, Caliente | 8 Cyl 5.0 L GAS
View related parts
Oldsmobile Oil Pump Part Number: 12482915
Product Specifications
- Other Name: Pump, Engine Oil Pump; Oil Pump Repair Kit
- Replaces: 10162088
Fits the following Oldsmobile Models:
- Cutlass Supreme | 1991-1996 | Base, International, S, SL | 6 Cyl 3.4 L GAS
View related parts
Oldsmobile Oil Pump Part Number: 90169113
Product Specifications
- Other Name: Pump, Engine Oil; Oil Pump Repair Kit; Pump, Engine Oil Pump
Fits the following Oldsmobile Models:
- Firenza | 1984-1986 | Base, Brougham LX, Brougham SX, Cruiser, Cruiser LX, Cruiser SX, ES, GT, LC, LX, S | 4 Cyl 1.8 L GAS
View related parts
Oldsmobile Oil Pump Part Number: 88984189
Product Specifications
- Other Name: Pump, Engine Oil Pump; Oil Pump Repair Kit
- Replaces: 10209660
Fits the following Oldsmobile Models:
- Cutlass Ciera | 1994-1996 | Base, S | 4 Cyl 2.2 L GAS
View related parts
Oldsmobile Oil Pump Part Number: 94657310
Product Specifications
- Other Name: Pump, Engine Oil Pump; Oil Pump Repair Kit
Fits the following Oldsmobile Models:
- Firenza | 1987-1988 | Base, Cruiser, LC, LX, S | 4 Cyl 2.0 L GAS
View related parts
Oldsmobile Oil Pump Part Number: 12337253
Product Specifications
- Other Name: Pump Kit, Engine Oil Pump; Oil Pump Repair Kit
Fits the following Oldsmobile Models:
- 98 | 1985 | Regency, Regency Brougham | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
- Cutlass Ciera | 1984-1985 | Brougham, Cruiser LS, ES, GT, Holiday, LS | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Oldsmobile Oil Pump Part Number: 14086060
Product Specifications
- Other Name: Pump, Engine Oil Pump; Oil Pump Repair Kit; Pump Kit, Engine Oil Pump
Fits the following Oldsmobile Models:
- Cutlass Ciera | 1993 | Base, S | 4 Cyl 2.2 L GAS
- Firenza | 1988, 1984-1986 | Base, Brougham LX, Brougham SX, Cruiser, Cruiser LX, Cruiser SX, ES, GT, LC, LX, S | 4 Cyl 2.0 L GAS
View related parts
Oldsmobile Oil Pump Part Number: 25518783
Product Specifications
- Other Name: Oil Pump Repair Kit
Fits the following Oldsmobile Models:
- Calais | 1985 | 500, Base, Supreme | 6 Cyl 3.0 L GAS
View related parts
Oldsmobile Oil Pump Part Number: 12337257
Product Specifications
- Other Name: Pump Kit, Oil (Overhaul) (Free Of Asbestos); Oil Pump Repair Kit
Fits the following Oldsmobile Models:
- Cutlass Calais | 1984 | Base | 6 Cyl 3.8 L GAS
- Cutlass Salon | 1985-1987 | Base | 6 Cyl 3.8 L GAS
- Cutlass Supreme | 1984-1987 | 442, Base, Brougham, LS | 6 Cyl 3.8 L GAS
- Delta 88 | 1984-1985 | Royale, Royale Brougham, Royale Brougham LS | 6 Cyl 3.8 L GAS
- Toronado | 1984 | Brougham | 6 Cyl 4.1 L GAS
View More
View related parts
Oldsmobile Oil Pump Part Number: 10118640
Product Specifications
- Other Name: Pump, Engine Oil Pump; Oil Pump Repair Kit
Fits the following Oldsmobile Models:
- Cutlass Supreme | 1989-1993 | Base, International, S, SL | 6 Cyl 3.1 L GAS
- Silhouette | 1990-1994 | Base | 6 Cyl 3.1 L GAS
View related parts
Oldsmobile Oil Pump Part Number: 22524583
Product Specifications
- Other Name: Pump, Engine Oil Pump; Oil Pump Repair Kit
Fits the following Oldsmobile Models:
- 98 | 1984 | Regency, Regency Brougham | 8 Cyl 5.0 L GAS
- Custom Cruiser | 1984-1990 | Base | 8 Cyl 5.0 L GAS
- Cutlass Calais | 1984 | Base, Hurst | 8 Cyl 5.0 L GAS
- Cutlass Salon | 1985-1987 | 442, Base | 8 Cyl 5.0 L GAS
- Cutlass Supreme | 1984-1987 | 442, Base, Brougham, LS | 8 Cyl 5.0 L GAS
- Delta 88 | 1984-1985 | Royale, Royale Brougham, Royale Brougham LS | 8 Cyl 5.0 L GAS
View More
View related parts
Oldsmobile Oil Pump Part Number: 12561396
Product Specifications
- Other Name: Pump, Engine Oil Pump; Oil Pump Repair Kit
Fits the following Oldsmobile Models:
- Aurora | 2001-2002 | Base | 6 Cyl 3.5 L GAS
- Intrigue | 1999-2002 | GL, GLS, GX | 6 Cyl 3.5 L GAS
View related parts
Oldsmobile Oil Pump Part Number: 12366006
Product Specifications
- Other Name: Pump, Engine Oil Pump; Oil Pump Repair Kit
- Replaces: 10008202, 10008206
Fits the following Oldsmobile Models:
- Calais | 1985-1987 | 500, Base, ES, GT, Supreme | 4 Cyl 2.5 L GAS
- Cutlass Ciera | 1984-1987 | Brougham, Cruiser LS, ES, GT, Holiday, LS, S, SL | 4 Cyl 2.5 L GAS
- Cutlass Cruiser | 1987 | Brougham | 4 Cyl 2.5 L GAS
View More

| Page 1 of 2 |Next >

1-20 of 23 Results

Oldsmobile Oil Pump

Choose OEM Oil Pump, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Oldsmobile's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Oldsmobile Oil Pump. You can shop at highly competitive prices and protect your budget. All our genuine Oldsmobile parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Oldsmobile Oil Pump is the one that keeps engines running by giving the engines continuous pressure of oil via metal guts. Oldsmobile was born in 1897 and became a car that went beyond being a fun crafted by hands to being an assembly-line commodity, rolling out a Curved Dash that the common people could actually afford and shocked the competition with the Hydra-Matic gearbox that allowed anyone to drive the car without having to ballet with the clutch, and continued to add on to the car the real-world comforts such as quieter cabins and stronger frames so that the whole family could make the trip across state lines without dropping theatrics. The brand never stagnated throughout decades, and Oldsmobile continued reinventing mass mobility by combining hard cast-iron blocks with more comfortable suspensions, prioritizing reliability over flash and proving that regular sedans can cover hundreds of miles in summer or snow with little expectations on the owners other than regular oil and fuel, people enjoyed the sound when they drove along highway. In each block, there is an Oil Pump in an Oldsmobile which forces the lubricant out of the pan, drags it up the galleries during crankshaft rotation, and cuts friction before heat can cut scars in pressure even up to the peak when the revs spike when merging onto the highway or climbing steep hills where the oil sloshes hard. The Oil Pump is also a mini cooler, spraying oil onto bearings and piston skirts and valve springs to remove spikes of boiling temperature. Delay oil change and the Oil Pump will run out of oil, trash will clog its gears and the pressure will drop to an extent that metal collides to metal and wallets will scream.

Oldsmobile Oil Pump Parts and Q&A

Water Pump
89060444
Q: Is it more practical and economical to replace a faulty oil pump with a new or rebuilt unit, and what steps should be taken if an overhaul is chosen in V8 engine on Oldsmobile Cutlass?
A:
Where possible, replacement of the faulty oil pump with a new or re-manufactured one is cheaper and more effective, but where an overhaul is decided on, one should find out on the availability of internal parts before starting. Starting, it is required to unscrew and remove the pump cover and the pump cover retaining screws, denoting the gear teeth for assembly. Subsequently, the idler gear, drive gear and shaft have to be removed from the body along with the pressure regulator valve retaining pin, the regulator valve and its related components are removed. If required, the pick-up screen and pipe assembly may be withdrawn from the pump body. Afterwards it is necessary to wash all the parts in some solvent and after that dry them up, checking the state of the body and especially gears for existence of cracks, wears, etc. Looseness between the pump body and drive gear shafts: check whether there is wear inside the pump cover to cause oil leakage. Most often, the pick-up screen and the pipe assembly must be examined for signs of wearing out. A gasket sealant should then be placed to the end of the pipe and the pipe tapped into the pump body without causing any damage; if the original press-fit is lost then the rear assembly must be used so as to counter air leaks and pressures loss. Mounting of the pressure regulator valve and other associated sub-assemblies, the drive gear and shaft arrangement in the pump body, the idler gear of the pump with the plain side towards the opening of the pump cover and the pump gears lubricated with engine oil. Last, bolt on the cover and power tighten the screws, thus rotating the driveshaft to check if the pump moves easily.