OEM Oldsmobile Control Arm Bumper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Control Arm Bumpers found

View related parts
Oldsmobile Bumper Part Number: 15956547
Product Specifications
- Other Name: Bumper, Steering Knuckle Upper And Lower Control Arm
- Position: Front Lower
- Replaces: 15989674
Fits the following Oldsmobile Models:
- Bravada | 1996-2004 | Base | 6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Oldsmobile Bumper, Front Upper Part Number: 1362014
Product Specifications
- Other Name: Bumper-Front Upper Control Arm; Bumper, Steering Knuckle Upper And Lower Control Arm; Bumper, Steering Knuckle Control Arm
- Position: Front Upper
Fits the following Oldsmobile Models:
- Bravada | 1996-2004, 1991-1994 | Base | 6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Oldsmobile Bumper Part Number: 15590236
$11.32 MSRP: $17.76
You Save: $6.44 (37%)
Product Specifications
- Other Name: Bumper, Steering Knuckle Upper And Lower Control Arm
- Position: Front Upper
Fits the following Oldsmobile Models:
- Bravada | 1996-2004, 1991-1994 | Base | 6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Oldsmobile Bumper, Front Lower Part Number: 14060055
Product Specifications
- Other Name: Bumper Assembly-Front Lower Control Arm; Bumper, Steering Knuckle Upper And Lower Control Arm
- Position: Front Lower
Fits the following Oldsmobile Models:
- Bravada | 1991-1994 | Base | 6 Cyl 4.3 L GAS
View related parts
Oldsmobile Bumper, Front Lower Part Number: 14055765
Product Specifications
- Other Name: Bumper Assembly-Front Lower Control Arm; Bumper, Steering Knuckle Upper And Lower Control Arm
- Position: Front Lower
Fits the following Oldsmobile Models:
- Bravada | 1991-1994 | Base | 6 Cyl 4.3 L GAS
View related parts
Oldsmobile Control Arm Part Number: 10068783
Product Specifications
- Other Name: Bumper, Steering Knuckle Upper And Lower Control Arm; Suspension Control Arm Bumper; Spring Retainer; Bumper; Bumper, Steering Knuckle Control Arm
- Position: Front Lower
Fits the following Oldsmobile Models:
- Bravada | 1996-2004, 1991-1994 | Base | 6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS

Oldsmobile Control Arm Bumper

Choose OEM Control Arm Bumper, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Oldsmobile's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Oldsmobile Control Arm Bumper. You can shop at highly competitive prices and protect your budget. All our genuine Oldsmobile parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Oldsmobile Control Arm Bumper also cushions suspension to prevent banging together of metal parts that would otherwise spoil the ride and ensure that every journey remains silent. Since 1897 Oldsmobile has been after that smoothness and has been the first with the cranking assembly line, the low cost Curved Dash, and then made families shiver with the Hydra-Matic, which enabled them to drive through traffic without a clutch. Month after month an Oldsmobile brought comfort, passenger room, and power that was programmed to relax, evidence of how continual improvement could be experienced within the comforting sedan. Oldsmobile was reliable in long trips as the drivers could comfortably drive it without getting tired or experiencing vibrations. Control Arm Bumper is a little rubber or polyurethane pad which restricts the extent of the suspension motion and absorbs sharp hits and dampens noises before hitting the frame. A new Control Arm Bumper is easy to install using trivial tools. Stop on flat ground, put on the brake, put the wheels in chocks, jack up the corner and hold it. Lift out the wheel, and place a jack under the control arm to de-tension the springs. Locate the damaged bumper, unbolt or unclip it and wash the mounting pad. Insert the new Control Arm Bumper and press or thread until it fits in. Refit bolts, lower the arm, reattach the wheel, torque lug nuts, drop the car and make a short test run just to ensure the quiet suspension travel.