What tools are required to replace the front inner axle wheel bearing on GMC Yukon?

Replacement of front drive axle inner axle seals and bearings requires these specific tools: the required tools for front drive axle inner axle seal or bearing replacement include j 8092 universal driver handle (J 8092), j 2619-01 slide hammer (J 2619-01), j 29369-1 bushing and bearing remover (J 29369-1), j 29369-2 bushing and bearing remover (2-3 inch) (J 29369-2), j 36609 axle tube bearing installer (J 36609) and j 45225 axle seal installer (J 45225). J 8092 universal driver handle (J 8092), j 2619-01 slide hammer (J 2619-01), j 29369-1 bushing and bearing remover (J 29369-1), j 29369-2 bushing and bearing remover (2-3 inch) (J 29369-2), j 36609 axle tube bearing installer (J 36609), and j 45225 axle seal installer (J 45225). Climb the vehicle and drain the Differential carrier assembly first. Wrench out the right side seal or bearing after removing both the inner Axle Shaft and Differential carrier case housing together with the Clutch Fork assembly. Place the inner Axle Shaft housing inside a vise while using clamps exclusively on the mounting flange. When removing the inner Axle Shaft seal or bearing use the specified bushing and bearing remover models j 29369-1 or j 29369-2 positioned behind the seal followed by attaching the slide hammer j 2619-01. To replace only the left side seal begin by marking the inner Axle Shaft-wheel drive shaft alignment and then detach the wheel drive shaft and extract the Axle Shaft with a hammer and brass drift followed by a suitable removal tool for the seal. Both left-side seal and bearing installations require Differential carrier assembly removal and vise-support for following the removal steps again. For installation you need the axle tube bearing installer (J 36609) with the universal driver handle (J 8092) for the right side bearing and new Axle Shaft seal installation alongside the axle seal installer (J 45225) using the universal driver handle (J 8092). Guide the inner Axle Shaft into position while tapping it gently before putting together the inner shaft structures with the Clutch Fork components and mounting the assembly onto the Differential case. Repeat the left side bearing and seal installation if you removed those components previously. Reposition the front Differential carrier assembly after checking the inner Axle Shaft seating then add proper fluid before placing the vehicle on its wheels.

How to replace the rear wheel bearing and wheel seal on GMC Yukon?

To remove/replacing the rear Axle Shaft seal or bearing, lift the vehicle and remove tire and wheel assembly first. Next, take away the rear axle housing cover and Axle Shaft. Make use of the rear axle seal and bearing remover (J 44685) and the slide hammer (J 2619-01), and be sure to remove the Axle Shaft seal and the bearing from the axle housing. For the installation scenario, use the Axle Shaft bearing installer ( J 23690), and the universal driver handle-312- 10 ( J 8092) and install the Axle Shaft bearing by driving it into the axle housing until the tool bottoms against the tube. Then, employ for the protection of axle pinion oil seal installer (J 21128) to apply the Axle Shaft seal, directing the side in the bore until reaching the seal level in the tube. Reinstall the Axle Shaft, the rear axle housing cover, and the tire and wheel assembly back to their original positions. Lastly, top the rear axle with lubricant and bring down the vehicle.

OEM GMC Yukon Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

22 Wheel Bearings found

View related parts
GMC Yukon Hub, Rear Part Number: 15725055
$341.37 MSRP: $527.97
You Save: $186.60 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly-Rear Wheel; Hub, Rear Wheel
- Position: Rear
- Replaces: 00365897, 365897
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2000 GMC Yukon | Base, Denali, GT, SL, SLE, SLT, Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
GMC Yukon Wheel Bearing Part Number: 457049
$24.87 MSRP: $45.03
You Save: $20.16 (45%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Bearing, Front Wheel Outer; Axle Bearing; Wheel Bearings; Front Wheel Bearing; Front Bearing; Outer Wheel Bearing; Outer Bearing; Bearing
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2000 GMC Yukon | Base, Denali, GT, SL, SLE, SLT, Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
GMC Yukon Wheel Bearing Part Number: 9439561
$72.53 MSRP: $131.28
You Save: $58.75 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rear Wheel Bearing; Axle Bearing; Axle Bearings; Shaft Bearings; Outer Bearing; Bearing; Bearing, Rear Axle Shaft; Bearing, Rear Wheel
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2006 GMC Yukon | Base, Denali, GT, SL, SLE, SLT, Sport | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
GMC Yukon Wheel Bearing Part Number: 9436881
$57.71 MSRP: $145.36
You Save: $87.65 (61%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential; Differential Pinion Bearing; Differential Bearing; Axle Bearings; Shaft; Inner; Side; Differential Gear; Front Wheel; Rear Wheel; Nut.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2006 GMC Yukon | Base, Denali, GT, SL, SLE, SLT, Sport | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
GMC Yukon Wheel Bearing Part Number: 9428908
$72.07 MSRP: $98.04
You Save: $25.97 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Rear Wheel Outer; Axle Bearings, Shaft Bearings, Grease Cap, Outer Bearing, Bearing Assembly, Front Wheel Outer, Rear Wheel.
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2000 GMC Yukon | Base, Denali, GT, SL, SLE, SLT, Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
GMC Yukon Output Shaft Bearing, Front Part Number: 26066885
$30.92 MSRP: $58.06
You Save: $27.14 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Front Axle; Differential Pinion Bearing; Wheel Bearing; Axle Bearing; Inner Pinion Bearing; Bearing, Front Axle And Axle Center
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2020, 2000-2005 GMC Yukon | Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Output Shaft Bearing, Front Part Number: 26041515
$29.20 MSRP: $54.84
You Save: $25.64 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Bearing, Front Axle; Wheel Bearing; Axle Bearing; Inner Pinion Bearing
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2000 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
GMC Yukon Wheel Bearing, Front Part Number: 457052
$38.44 MSRP: $66.52
You Save: $28.08 (43%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Bearing, Front Wheel Inner; Axle Bearing; Wheel Bearings; Front Inner Bearing; Bearing Assembly, Transmission Main Shaft; Gear Bearings; Front Outer Bearing.
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2000 GMC Yukon | Base, Denali, GT, SL, SLE, SLT, Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
GMC Yukon Wheel Bearings, Front Inner Part Number: 15595151
$75.48 MSRP: $141.74
You Save: $66.26 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Front Wheel Inner; Wheel Bearing; Axle Bearing; Inner Bearing
- Position: Front Inner
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2000 GMC Yukon | Base, Denali, GT, SL, SLE, SLT, Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
GMC Yukon Hub Assembly Part Number: 13536121
$130.01 MSRP: $235.32
You Save: $105.31 (45%)
ADD TO CART
Product Specifications
- Other Name: Hub, Rear Wheel (W/Bearing); Wheel Hub; Rear Hub & Bearing; Hub, Rear Wheel
- Replaced by: 13549865
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Yukon | AT4, Denali, Denali Ultimate, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Front Hub Part Number: 84856653
$241.51 MSRP: $472.84
You Save: $231.33 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly-Front Wheel (W/ Bearing & Wheel Speed Sensor); Wheel Hub Repair Kit; Wheel Bearing; Axle Bearing; Wheel Hub; Hub & Bearing; Hub, Front Wheel
- Position: Front
- Replaces: 10393170, 20883242, 84356642, 25819677, 22841380
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 GMC Yukon | Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Axle Bearings, Front Part Number: 23243752
$10.11 MSRP: $18.98
You Save: $8.87 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly-Front Differential; Wheel Bearing; Axle Bearing; Output Shaft Bearing; Bearing, Front Axle
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Yukon | AT4, Denali, Denali Ultimate, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Wheel Bearings Part Number: 457043
$59.61 MSRP: $98.54
You Save: $38.93 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Front Wheel Outer; Wheel Bearing; Axle Bearing; Front Wheel Bearing; Outer Bearing
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2000 GMC Yukon | Base, Denali, GT, SL, SLE, SLT, Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
GMC Yukon Wheel Bearing, Front Part Number: 457232
$29.38 MSRP: $50.52
You Save: $21.14 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Front Wheel Brace; Wheel Bearings; Front Outer & Inner Bearings; Differential Side Gear Bearing.
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2000 GMC Yukon | Base, Denali, GT, SL, SLE, SLT, Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
GMC Yukon Front Hub Part Number: 15233113
Product Specifications
- Other Name: Hub, Front Wheel (W/Wheel Speed Sensor); Wheel Bearing & Hub Assembly; Repair Kit; Axle Bearing.; Hub & Bearing; Hub
- Position: Front
- Replaces: 15112382, 15134584, 15740291
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2006 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon Hub & Bearing, Front Driver Side Part Number: 15997071
Product Specifications
- Other Name: Hub, Front Wheel; Wheel Bearing & Hub Assembly; Repair Kit; Axle Bearing.
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2000 GMC Yukon | Base, Denali, SL, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
GMC Yukon Outer Bearing Part Number: 9412405
Product Specifications
- Other Name: Bearing, Rear Wheel Outer; Wheel Bearing; Axle Bearing; Bearing, Rear Wheel
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2000 GMC Yukon | Base, Denali, GT, SL, SLE, SLT, Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
GMC Yukon Inner Bearing Part Number: 9412426
Product Specifications
- Other Name: Bearing; Wheel Bearing; Axle Bearing; Bearing, Rear Wheel
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2000 GMC Yukon | Base, Denali, GT, SL, SLE, SLT, Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
GMC Yukon Hub & Bearing, Front Part Number: 15693437
Product Specifications
- Other Name: Hub, Front Wheel; Wheel Bearing & Hub Assembly; Repair Kit; Axle Bearing.
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1996 GMC Yukon | Base, GT, SL, SLE, SLT, Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
GMC Yukon Hub & Bearing, Front Passenger Side Part Number: 15997072
Product Specifications
- Other Name: Hub, Front Wheel; Wheel Bearing & Hub Assembly; Repair Kit; Axle Bearing.
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2000 GMC Yukon | Base, Denali, SL, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL

| Page 1 of 2 |Next >

1-20 of 22 Results

GMC Yukon Wheel Bearing

Want to cut long-term maintenance and repair costs? Choose OEM Wheel Bearing. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Yukon parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Yukon Wheel Bearing includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Wheel Bearing in GMC Yukon is an important component that enables easy rotation of the wheels hence improving both the power and stability. These are usually located in the hubs and they help to reduce the amount of friction required for the wheel and tire assembly to turn. Through the years, GMC Yukon has employed different hub and bearing set up; however, the most common is the unit or integral hub and bearing assembly with ABS sensor that is replaced jointly. Also, the front-wheel-drive models may needs the steering knuckle to be detached in order to become serviced, while the non-driven axle hubs contain the taper roller bearing which are replaceable. The wheel bearings often exhibit signs of wear necessitating replacement; and a worn or loose wheel can lead to dreadful noise and vibration and complete detachment in some cases and therefore require constant checkups. The care that is required consists in feeling whether bearings are rough and greasing them with high temperature grease every time they are replaced.

GMC Yukon Wheel Bearing Parts and Q&A

Wheel Bearing
9439561
Q: What tools are required to replace the front inner axle wheel bearing on GMC Yukon?
A:
Replacement of front drive axle inner axle seals and bearings requires these specific tools: the required tools for front drive axle inner axle seal or bearing replacement include j 8092 universal driver handle (J 8092), j 2619-01 slide hammer (J 2619-01), j 29369-1 bushing and bearing remover (J 29369-1), j 29369-2 bushing and bearing remover (2-3 inch) (J 29369-2), j 36609 axle tube bearing installer (J 36609) and j 45225 axle seal installer (J 45225). J 8092 universal driver handle (J 8092), j 2619-01 slide hammer (J 2619-01), j 29369-1 bushing and bearing remover (J 29369-1), j 29369-2 bushing and bearing remover (2-3 inch) (J 29369-2), j 36609 axle tube bearing installer (J 36609), and j 45225 axle seal installer (J 45225). Climb the vehicle and drain the Differential carrier assembly first. Wrench out the right side seal or bearing after removing both the inner Axle Shaft and Differential carrier case housing together with the Clutch Fork assembly. Place the inner Axle Shaft housing inside a vise while using clamps exclusively on the mounting flange. When removing the inner Axle Shaft seal or bearing use the specified bushing and bearing remover models j 29369-1 or j 29369-2 positioned behind the seal followed by attaching the slide hammer j 2619-01. To replace only the left side seal begin by marking the inner Axle Shaft-wheel drive shaft alignment and then detach the wheel drive shaft and extract the Axle Shaft with a hammer and brass drift followed by a suitable removal tool for the seal. Both left-side seal and bearing installations require Differential carrier assembly removal and vise-support for following the removal steps again. For installation you need the axle tube bearing installer (J 36609) with the universal driver handle (J 8092) for the right side bearing and new Axle Shaft seal installation alongside the axle seal installer (J 45225) using the universal driver handle (J 8092). Guide the inner Axle Shaft into position while tapping it gently before putting together the inner shaft structures with the Clutch Fork components and mounting the assembly onto the Differential case. Repeat the left side bearing and seal installation if you removed those components previously. Reposition the front Differential carrier assembly after checking the inner Axle Shaft seating then add proper fluid before placing the vehicle on its wheels.
Wheel Bearing, Rear
12479031
Q: How to replace the rear wheel bearing and wheel seal on GMC Yukon?
A:
To remove/replacing the rear Axle Shaft seal or bearing, lift the vehicle and remove tire and wheel assembly first. Next, take away the rear axle housing cover and Axle Shaft. Make use of the rear axle seal and bearing remover (J 44685) and the slide hammer (J 2619-01), and be sure to remove the Axle Shaft seal and the bearing from the axle housing. For the installation scenario, use the Axle Shaft bearing installer ( J 23690), and the universal driver handle-312- 10 ( J 8092) and install the Axle Shaft bearing by driving it into the axle housing until the tool bottoms against the tube. Then, employ for the protection of axle pinion oil seal installer (J 21128) to apply the Axle Shaft seal, directing the side in the bore until reaching the seal level in the tube. Reinstall the Axle Shaft, the rear axle housing cover, and the tire and wheel assembly back to their original positions. Lastly, top the rear axle with lubricant and bring down the vehicle.