OEM GMC Jimmy Clutch Master Cylinder

GMC Jimmy Clutch Master Cylinder Parts and Q&A

• Master Cylinder
  15051973
  Q: How to service and repair the Clutch Master Cylinder on GMC Jimmy?

  A:

  You must start Clutch Master Cylinder repair by taking out the master cylinder rod from the clutch pedal followed by rotating the cylinder 45 degrees counterclockwise to unravel it. First disconnect the wiring harness from the Clutch Master Cylinder start switch then remove the clips that hold the clutch line in place between the dash panel and heat shield before extracting the Clutch Master Cylinder from its panel. The dual service tool j42371 helps remove the clutch line from the concentric slave cylinder function. Before installation begin by fastening clutch line attach clips to both the dash panel and heat shield then complete the connection by pulling the connector sleeve toward the concentric slave cylinder. Insert the Clutch Master Cylinder into the cowl panel opening and rotate it 45 degrees counter-clockwise for secure positioning. Finally attach the rod to the clutch pedal.
• Master Cylinder
  12584955
  Q: How to replace the Clutch Master Cylinder on GMC Jimmy?

  A:

  To replace the Clutch Master Cylinder, first pull off the master cylinder rod from the clutch pedal. Then, twist the master cylinder 45 degrees counterclockwise to disengage it, and pull away the wiring harness from the clutch the master cylinder start switch. Hoses the clips hold the clutch line to the dash panel and heat shield, and remove the Clutch Master Cylinder from the dash panel. Remove the clutch line using the clutch line release tool(J 42371) at the control of the concentric slave cylinder. Begin with installing the clips for the clutch line at the dash panel and heat shield. Refuse on the connector sleeve then connect the clutch line to the concentric slave cylinder. Place the Clutch Master Cylinder into the cowl panel hole, turn it 45 counterclockwise to lock it, and at last, attach the master cylinder rod to the clutch pedal.