How to replace the rear differential cover and gasket on a 9.5 Inch Axle on GMC Envoy?

The first step to replace both the rear axle housing cover and gasket on a 9.5 inch axle starts with raising and supporting the vehicle. Begin by removing the Drain Plug before taking out rear axle cover mounting bolts and the axle housing cover . The gasket remains to be taken off last. The axle housing gasket can be used again only if it remains undamaged. Place the axle housing gasket first before setting the axle housing cover into position. Mount the bolts in position before tightening them to 40 nm torque setting (30 lb ft). Then install the Drain Plug by applying torque characteristics of 33 nm (24 lb in). Pour enough lubricant into the rear axle but maintain a fluid level between 0-13 mm (0-0.5 inch) below the fill plug hole. Use the correct fluid to manually fill the cavity until the fill plug opening's lowest point is touched. Finally, lower the vehicle.

OEM GMC Envoy Differential Cover

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Differential Cover found

View related parts
GMC Envoy Differential Cover, Rear Part Number: 19133285
$117.73 MSRP: $185.23
You Save: $67.50 (37%)
Product Specifications
- Other Name: Cover Kit, Rear Axle Housing (9.5); Axle Cover; Cover; Cover Kit, Rear Axle Housing
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2009 GMC Envoy | Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS

GMC Envoy Differential Cover

Want to cut long-term maintenance and repair costs? Choose OEM Differential Cover. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Envoy parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Envoy Differential Cover includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Differential Cover is one of the most important parts which in the optimal traditions of strength and reliability of the models of the GMC Envoy produced from 1998 till 2009. This Differential Cover has a basic function of protecting the internal compartments of the car, for example against leaks of the lubricant that can cause malfunctions in the car parts. Differential Cover is available in steel, aluminum, cast iron and carbon steel and comes in chrome and powder coated black for improved surface finishing. It applies across different generations of the Envoy- the first generation (1998-2000), and the second generation (2002-2009), making it a convenient model to the owners who want to keep their automobiles in the optimal condition. Thus, the function of the Differential Cover is not only limited to providing shield but also acts an important element that improves the performance and safety of the car. For instance, the GMC Envoy that has been marked as the Sport/Utility of the Year by the Motor Trend Magazine in 2002, and the capacity of the Differential Cover carries on the same tradition. In the present automotive market, the Differential Cover comes with an exceptional performance especially in terms of its durability under different driving situations and therefore offers efficient and reliable performance for the GMC Envoy for many decades.

GMC Envoy Differential Cover Parts and Q&A

Differential Cover, Rear
19133285
Q: How to replace the rear differential cover and gasket on a 9.5 Inch Axle on GMC Envoy?
A:
The first step to replace both the rear axle housing cover and gasket on a 9.5 inch axle starts with raising and supporting the vehicle. Begin by removing the Drain Plug before taking out rear axle cover mounting bolts and the axle housing cover . The gasket remains to be taken off last. The axle housing gasket can be used again only if it remains undamaged. Place the axle housing gasket first before setting the axle housing cover into position. Mount the bolts in position before tightening them to 40 nm torque setting (30 lb ft). Then install the Drain Plug by applying torque characteristics of 33 nm (24 lb in). Pour enough lubricant into the rear axle but maintain a fluid level between 0-13 mm (0-0.5 inch) below the fill plug hole. Use the correct fluid to manually fill the cavity until the fill plug opening's lowest point is touched. Finally, lower the vehicle.