How to replace the battery sensor on GMC Yukon?

To replace the battery current sensor you should disconnect the negative Battery Cable and mark its position on the cable. Take off tape holding the sensor then mark where the two negative cable wires connect before disconnecting them. Pinch the two ends of the negative Battery Cable together while paying attention to its normal arrangement before you take off the battery current sensor. After aligning the cable branches press them together to place the new battery current sensor at the marked spots. Bed the new sensor on the cable and fasten it in place using electrical tape. Place the marked negative Battery Cable clips back onto the specified points then install the Battery Cable.

How to replace the Battery Sensor for the 4.3L engine on GMC Sierra 1500?

The first thing you should do for replacing the battery current sensor on a 4.3l engine is disconnect the negative Battery Cable. Mark the battery current sensor's spot on the negative Battery Cable with tape for a quicker and easier reinstallation. Pull off the tape keeping the battery current sensor to the negative cable, then keep track of where the negative Battery Cable clips were and remove them. Hold the negative Battery Cable branches together and make sure you notice the battery current sensor's position before taking it off. Push the battery current sensor down the negative Battery Cable until it comes off. Before putting the new battery current sensor on, squeeze the negative Battery Cable together and check that it is lined up correctly. Put the new battery current sensor onto the negative Battery Cable at the spot you previously marked, and hold it on by wrapping electrical tape around its leg. Screw the negative Battery Cable clips onto the mounting holes you earlier marked and connect the negative cable to the battery.

OEM GMC Battery Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Battery Sensors found

View related parts
GMC Battery Current Sensor, Green Line Part Number: 13505369
$19.14 MSRP: $35.94
You Save: $16.80 (47%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Battery; Voltage Sensor; Negative Cable Cover; Sensor
- Replaces: 13502261
Fits the following GMC Models:
- Acadia | 2007-2016 | Denali, SL, SLE, SLT | 6 Cyl 3.6 L GAS
- Acadia Limited | 2017 | Base | 6 Cyl 3.6 L GAS
- Sierra 1500 | 2019-2023, 2007-2015 | AT4, Base, Denali, Elevation, Hybrid, Pro, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
- Sierra 2500 HD | 2020-2023, 2007-2013 | AT4, Base, Denali, Pro, SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Sierra 3500 HD | 2020-2023, 2007-2013 | AT4, Base, Denali, Pro, SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Terrain | 2010 | SLE, SLT | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
- Yukon | 2007-2014 | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
- Yukon XL 1500 | 2007-2014 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
- Yukon XL 2500 | 2007-2013 | SLE, SLT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View More
View related parts
GMC Sensor Part Number: 25870512
$77.77 MSRP: $121.82
You Save: $44.05 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Drive Motor Battery
Fits the following GMC Models:
- Sierra 1500 | 2009-2013 | Hybrid | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
- Yukon | 2008-2013 | Denali Hybrid, Hybrid | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
View related parts
GMC Battery Current Sensor Part Number: 13599060
$64.94 MSRP: $101.70
You Save: $36.76 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Battery (Multifunction); Sensor; Sensor, Battery
Fits the following GMC Models:
- Acadia | 2017 | Denali, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
GMC Battery Current Sensor Part Number: 13545954
$55.60 MSRP: $87.09
You Save: $31.49 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Battery (Multifunction); Sensor; Sensor, Battery
- Replaces: 13517337, 13526054
Fits the following GMC Models:
- Acadia | 2018-2023 | AT4, Denali, SL, SLE, SLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
GMC Battery Current Sensor Part Number: 13545953
$53.50 MSRP: $83.79
You Save: $30.29 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Battery (Multifunction); Sensor; Sensor, Battery
- Replaces: 13520441, 13526053, 13508047, 13517335
Fits the following GMC Models:
- Sierra 1500 | 2019-2023 | AT4, AT4X, Base, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Sierra 1500 Limited | 2022 | AT4, Denali, Elevation, SLE, SLT | 6 Cyl 3.0 L DIESEL
- Terrain | 2018-2024 | AT4, Denali, SL, SLE, SLT | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L DIESEL, 4 Cyl 2.0 L GAS
View More
View related parts
GMC Battery Current Sensor Part Number: 13542820
$49.43 MSRP: $77.40
You Save: $27.97 (37%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Battery (Multifunction); Positive Term; Sensor; Sensor, Battery
- Replaces: 13536722, 13526056
Fits the following GMC Models:
- Canyon | 2023 | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
- Hummer EV Pickup | 2022-2023 | 3X, Edition 1 | BATTERY EV (EV/BEV)
- Sierra 1500 | 2023 | AT4, AT4X, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Yukon | 2021-2023 | AT4, Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Yukon XL | 2021-2023 | AT4, Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View More
View related parts
GMC Temperature Sensor Part Number: 88986968
Product Specifications
- Other Name: Sensor Assembly, Battery Temperature; Coolant Temperature Sensor; Battery Temperature Sensor; Sensor, Battery Cable
Fits the following GMC Models:
- Sierra 1500 | 2004-2006 | Base, Denali, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Sierra 1500 Classic | 2007 | Denali, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Sierra 1500 HD | 2005-2006 | SLE, SLT | 8 Cyl 6.0 L GAS
- Sierra 1500 HD Classic | 2007 | SLE, SLT | 8 Cyl 6.0 L GAS
- Sierra 2500 | 2004 | Base, SLE, SLT, WT | 8 Cyl 6.0 L GAS
- Sierra 2500 HD | 2004-2006 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Sierra 2500 HD Classic | 2007 | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Sierra 3500 | 2004-2006 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Sierra 3500 Classic | 2007 | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Yukon | 2004-2006 | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View More
View related parts
GMC Temperature Sensor Part Number: 88986978
Product Specifications
- Other Name: Sensor Assembly, Battery Temperature; Coolant Temperature Sensor; Sensor; Sensor, Battery Cable
Fits the following GMC Models:
- Sierra 1500 | 2005-2006 | Hybrid | 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV)
- Sierra 1500 Classic | 2007 | Hybrid | 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV)

GMC Battery Sensor

Choose OEM Battery Sensor, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with GMC's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM GMC Battery Sensor. You can shop at highly competitive prices and protect your budget. All our genuine GMC parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

GMC Battery Sensor maintains the charge equilibrium and notifies the system when there is a shortfall in power. The brand started with trucks that carried timber in the year 1901, but today it delivers pickups and SUVs which shake off day-to-day abuse and weekend luggage. GMC customizes stiff frames, fat engines, and adjustable suspensions in such a way that drivers can drag boats, scale gravel inclines, or roll over suburban boulevards without doing any dramatics. Road noise is reduced due to narrow panels and active cabin baffles whereas MultiPro tailgate folds into six convenient configurations to access the bed faster. The digital aids such as surround vision, hitch guidance, and lane alert system collaborate with each other enabling the driver to concentrate on the task rather than the device. Any model as it is being developed must first survive the severe test cycles where it is baked in deserts, frozen in tundra, and pounded in potholes before it reaches a buyer. Proprietors have acknowledged GMC as a book that lasts longer than the payment. The Battery Sensor is mounted on the negative side and reads voltage, current, and temperature every split second and sends live values to the control module which regulates the alternator output and start-stop timing. Proper tracking enables the system to refill the battery during downhill coast, reduce the charging load during acceleration, and give a warning about a bad cell before a cold morning kill-switches your scheme. Due to the Battery Sensor detecting trouble early, drivers do not have to do a sudden jump start and the battery leads a longer cleaner life. It also balances power when using heavy parts as lights are bright and infotainment is smooth when the car is stuck in traffic lights.

GMC Battery Sensor Parts and Q&A

Sensor
25870512
Q: How to replace the battery sensor on GMC Yukon?
A:
To replace the battery current sensor you should disconnect the negative Battery Cable and mark its position on the cable. Take off tape holding the sensor then mark where the two negative cable wires connect before disconnecting them. Pinch the two ends of the negative Battery Cable together while paying attention to its normal arrangement before you take off the battery current sensor. After aligning the cable branches press them together to place the new battery current sensor at the marked spots. Bed the new sensor on the cable and fasten it in place using electrical tape. Place the marked negative Battery Cable clips back onto the specified points then install the Battery Cable.
Battery Current Sensor, Green Line
13505369
Q: How to replace the Battery Sensor for the 4.3L engine on GMC Sierra 1500?
A:
The first thing you should do for replacing the battery current sensor on a 4.3l engine is disconnect the negative Battery Cable. Mark the battery current sensor's spot on the negative Battery Cable with tape for a quicker and easier reinstallation. Pull off the tape keeping the battery current sensor to the negative cable, then keep track of where the negative Battery Cable clips were and remove them. Hold the negative Battery Cable branches together and make sure you notice the battery current sensor's position before taking it off. Push the battery current sensor down the negative Battery Cable until it comes off. Before putting the new battery current sensor on, squeeze the negative Battery Cable together and check that it is lined up correctly. Put the new battery current sensor onto the negative Battery Cable at the spot you previously marked, and hold it on by wrapping electrical tape around its leg. Screw the negative Battery Cable clips onto the mounting holes you earlier marked and connect the negative cable to the battery.