What tools are required to replace the Balance Shaft Bearing Set on GMC Sierra 1500?

You need two specific tools for this task: J 26941 Bushing and Bearing Remover plus J 38834 Balance Shaft Service Kit. Start your process by taking out the balance shaft. Insert the J 38834-1 tool into the balance shaft bore and put the J 26941 tool behind the balance shaft rear bearing. Insert the J 38834-1 into the J 26941 then position the J 38834-2 over the J 38834-1 after sliding it into the balance shaft bore of the engine block before putting on the J 38834 bearing, washer, and nut. Use the solid J 38834-1 nut with your wrench to tighten while rotating clockwise until the rear balance shaft bearing is out of the engine block. Remove J 26941 from the bearing to discard it. You can install the new balance shaft rear bearing using the J 38834 method by adding the J 38834-3 part on the J 38834-1 short threaded end before connecting the J 38834 nut, washer, and bearing to the J 38834-1 long threaded end. Place the J 38834-2 into the balance shaft front bearing bore while its small side faces forward of the engine block. Apply clean engine oil to the new balance shaft rear bearing and place it properly on the J 38834-2. Rotate the shaft to line up its components before tightening the J 38834-1 with a wrench. Turn the J 38834 nut to push both layers of the balance shaft until the hind bearing wholly enters its bore. Replace the balance shaft with the J 38834.

What tools are required to replace the Balance Shaft Bearing Set on GMC Jimmy?

The necessary tools for this task include J 26941 (Bushing/Bearing Remover) and J 38834 (Balance Shaft Service Kit). Put the balance shaft aside and insert the J 26941 tool to fix the legs behind the back of the shaft's bearing. First insert the short-threaded J 38834-1 into the balance shaft bore at the front of the block then push it into the J 26941 tool. Push the J 38834-2 through J 38834-1 into the balance shaft bore of the engine block. Twist the J 38834 nut clockwise with a wrench and place the J 38834 bearing along with its washer over the J 38834-1 before tightening it until the balance shaft rear bearing leaves the engine block. The old balance shaft rear bearing should be replaced in this step. To install the new balance shaft rear bearing insert the J 38834-3 onto the small threaded end of the J 38834-1 and then attach the bearing components on its long threaded end. Insert the smaller diameter end of part J 38834-2 into the balance shaft front bearing bore with the J 38834-1 positioned correctly on the end. Apply clean engine oil onto the new balance shaft rear bearing and set it onto the J 38834-2 by ensuring correct alignment. Use a wrench to tighten the J 38834-1 until the balance shaft rear bearing fits completely into its bore space. Put the balance shaft into position by fitting the J 38834 attachment.

OEM GMC Balance Shaft Bearing Set

Engine Camshaft And Crankshaft Balancer Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Balance Shaft Bearing Set found

View related parts
GMC Bearings, Front Part Number: 12604129
$0.76 MSRP: $1.20
You Save: $0.44 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Engine Camshaft & Balance Shaft Front; Balance Shaft Bearing Set; Bearing, Engine Camshaft
- Position: Front
Fits the following GMC Models:
- Canyon | 2004-2012 | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Bearing Set, Front Part Number: 10105908
$41.76 MSRP: $68.80
You Save: $27.04 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Engine Camshaft & Balance Shaft Front; Balance Shaft Bearing Set; Bearing; Bearings
- Position: Front
Fits the following GMC Models:
- C1500 | 1994-1998 | Sierra GT, Sierra SL, Sierra SLE, Sierra SLT, Sierra Special | 6 Cyl 4.3 L GAS
- C2500 | 1994-1995 | Sierra SL, Sierra SLE | 6 Cyl 4.3 L GAS
- G3500 | 1996 | Magnavan, Rally, Rally Camper Special, Rally STX, Vandura, Vandura Special | 6 Cyl 4.3 L GAS
- Jimmy | 1992-2001 | Base, Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
- K1500 | 1994-1998 | Sierra SL, Sierra SLE, Sierra SLS, Sierra SLT, Sierra Special | 6 Cyl 4.3 L GAS
- K2500 | 1994-1995 | Sierra SL, Sierra SLE | 6 Cyl 4.3 L GAS
- Safari | 1992-2005 | Base, GT, SL, SLE, SLT, SLX | 6 Cyl 4.3 L GAS
- Savana 1500 | 1996-2014 | Base, LS, LT, SLE, SLT | 6 Cyl 4.3 L GAS
- Savana 2500 | 1996-2006 | Base, SLE, SLT | 6 Cyl 4.3 L GAS
- Savana 3500 | 2000-2002, 1997-1998 | Base, SLE, SLT | 6 Cyl 4.3 L GAS
View More
View related parts
GMC Bearing Part Number: 12629468
$6.50 MSRP: $10.70
You Save: $4.20 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Rear
Fits the following GMC Models:
- Sierra 1500 | 2014-2018 | Base, SLE | 6 Cyl 4.3 L FLEX
View related parts
GMC Bearing Part Number: 12629467
$6.22 MSRP: $10.25
You Save: $4.03 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Front
Fits the following GMC Models:
- Sierra 1500 | 2014-2018 | Base, SLE | 6 Cyl 4.3 L FLEX
View related parts
GMC Shaft Bearings Part Number: 55487304
$2.88 MSRP: $4.50
You Save: $1.62 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing; Balance Shaft Bearing Set; Bearings; Bearing, Engine Camshaft & Balance Shaft Front
Fits the following GMC Models:
- Acadia | 2020-2023 | Denali, SLE, SLT | 4 Cyl 2.0 L GAS
View related parts
GMC Bearing Set Part Number: 12618626
$51.57 MSRP: $81.88
You Save: $30.31 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Kit, Balancer Shaft; Balance Shaft Bearing Set; Bearing; Bearings; Bearing Kit, Engine Crankshaft And Camshaft Balancer
- Replaces: 12521651
Fits the following GMC Models:
- C1500 | 1994-1998 | Sierra GT, Sierra SL, Sierra SLE, Sierra SLT, Sierra Special | 6 Cyl 4.3 L GAS
- C2500 | 1994-1995 | Sierra SL, Sierra SLE | 6 Cyl 4.3 L GAS
- G3500 | 1996 | Magnavan, Rally, Rally Camper Special, Rally STX, Vandura, Vandura Special | 6 Cyl 4.3 L GAS
- Jimmy | 1992-2001 | Base, Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
- K1500 | 1994-1998 | Sierra SL, Sierra SLE, Sierra SLS, Sierra SLT, Sierra Special | 6 Cyl 4.3 L GAS
- K2500 | 1994-1995 | Sierra SL, Sierra SLE | 6 Cyl 4.3 L GAS
- Safari | 1992-2005 | Base, GT, SL, SLE, SLT, SLX | 6 Cyl 4.3 L GAS
- Savana 1500 | 1996-2014 | Base, LS, LT, SLE, SLT | 6 Cyl 4.3 L GAS
- Savana 2500 | 1996-2006 | Base, SLE, SLT | 6 Cyl 4.3 L GAS
- Savana 3500 | 2000-2002, 1997-1998 | Base, SLE, SLT | 6 Cyl 4.3 L GAS
View More
View related parts
GMC Bearings Part Number: 12604131
$7.43 MSRP: $11.64
You Save: $4.21 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Engine Crankshaft; Balance Shaft Bearing Set; Bearing, Engine Crankshaft And Camshaft Balancer
- Position: Center
Fits the following GMC Models:
- Canyon | 2004-2012 | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Bearings Part Number: 12604130
$7.47 MSRP: $11.71
You Save: $4.24 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Engine Crankshaft; Balance Shaft Bearing Set; Bearing, Engine Crankshaft And Camshaft Balancer
- Position: Center
Fits the following GMC Models:
- Canyon | 2004-2012 | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Bearings, Front Part Number: 12604128
$6.24 MSRP: $9.77
You Save: $3.53 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Engine Camshaft & Balance Shaft Front; Balance Shaft Bearing Set; Bearing, Engine Camshaft
- Position: Front
Fits the following GMC Models:
- Canyon | 2004-2012 | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Shaft Bearings Part Number: 12665019
$2.88 MSRP: $4.50
You Save: $1.62 (36%)
Product Specifications
- Other Name: Bearing-Balancer Shaft; Balance Shaft Bearing Set; Bearing, Engine Crankshaft And Camshaft Balancer
Fits the following GMC Models:
- Canyon | 2023 | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
- Sierra 1500 | 2019-2023 | Base, Elevation, Pro, SLE | 4 Cyl 2.7 L GAS

GMC Balance Shaft Bearing Set

Choose OEM Balance Shaft Bearing Set, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with GMC's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM GMC Balance Shaft Bearing Set. You can shop at highly competitive prices and protect your budget. All our genuine GMC parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

GMC Balance Shaft Bearing Set removes engine vibration by holding the shafts firmly in place with rough precision. GMC manufactures SUVs and trucks that transport, tow, and even commute without hustle as the drivers remain confident. Its steel frames shake off bumpy roads and powertrains that are tried and tested have to push heavy loads day in and day out. GMC cabins remain silent, infotainment remains uncluttered, and intelligent assistants such as surround vision get owners to be responsive. The frequent upgrades in materials make them strong, technology up to date, and values are solid so that customers feel that their investment is holding in. The company was started in 1901 and more than a hundred years of experimentation has created a reputation of straight-up straightness that can be measured by the customers in terms of durability. Drivers place their confidence in the badge since before any model is found in the lot, they are tested in deserts, snowfields, flooded back roads and in busy city streets. The Balance Shaft Bearing Set has bi-metal or tri-metal layers in all compatible engines to maintain proper oil clearance, allow the balance shafts to spin freely and cut vibration that would have rattled the steering wheel and worn out mounts. Accurate machine operations in the cylinder block translate to the third and fourth owners spending less time on the speedy installation, the extended life, and reduced maintenance. The Balance Shaft Bearing Set helps the motor to run cooler, burns less fuel and turns climbs up the highway into cruising since the Balance Shaft Bearing Set helps to ensure the smooth rotation.

GMC Balance Shaft Bearing Set Parts and Q&A

Bearing Set
12618626
Q: What tools are required to replace the Balance Shaft Bearing Set on GMC Sierra 1500?
A:
You need two specific tools for this task: J 26941 Bushing and Bearing Remover plus J 38834 Balance Shaft Service Kit. Start your process by taking out the balance shaft. Insert the J 38834-1 tool into the balance shaft bore and put the J 26941 tool behind the balance shaft rear bearing. Insert the J 38834-1 into the J 26941 then position the J 38834-2 over the J 38834-1 after sliding it into the balance shaft bore of the engine block before putting on the J 38834 bearing, washer, and nut. Use the solid J 38834-1 nut with your wrench to tighten while rotating clockwise until the rear balance shaft bearing is out of the engine block. Remove J 26941 from the bearing to discard it. You can install the new balance shaft rear bearing using the J 38834 method by adding the J 38834-3 part on the J 38834-1 short threaded end before connecting the J 38834 nut, washer, and bearing to the J 38834-1 long threaded end. Place the J 38834-2 into the balance shaft front bearing bore while its small side faces forward of the engine block. Apply clean engine oil to the new balance shaft rear bearing and place it properly on the J 38834-2. Rotate the shaft to line up its components before tightening the J 38834-1 with a wrench. Turn the J 38834 nut to push both layers of the balance shaft until the hind bearing wholly enters its bore. Replace the balance shaft with the J 38834.
Bearing Set, Front
10105908
Q: What tools are required to replace the Balance Shaft Bearing Set on GMC Jimmy?
A:
The necessary tools for this task include J 26941 (Bushing/Bearing Remover) and J 38834 (Balance Shaft Service Kit). Put the balance shaft aside and insert the J 26941 tool to fix the legs behind the back of the shaft's bearing. First insert the short-threaded J 38834-1 into the balance shaft bore at the front of the block then push it into the J 26941 tool. Push the J 38834-2 through J 38834-1 into the balance shaft bore of the engine block. Twist the J 38834 nut clockwise with a wrench and place the J 38834 bearing along with its washer over the J 38834-1 before tightening it until the balance shaft rear bearing leaves the engine block. The old balance shaft rear bearing should be replaced in this step. To install the new balance shaft rear bearing insert the J 38834-3 onto the small threaded end of the J 38834-1 and then attach the bearing components on its long threaded end. Insert the smaller diameter end of part J 38834-2 into the balance shaft front bearing bore with the J 38834-1 positioned correctly on the end. Apply clean engine oil onto the new balance shaft rear bearing and set it onto the J 38834-2 by ensuring correct alignment. Use a wrench to tighten the J 38834-1 until the balance shaft rear bearing fits completely into its bore space. Put the balance shaft into position by fitting the J 38834 attachment.