How to service and repair the tie rod end on Chevrolet Venture?

In order to service and fix the Tie Rod End, work with j24319-b (Universal Steering Linkage Puller) to disconnect the outer tie rod from the Steering Knuckle after removing tie rod ball stud nut. Do not use a pickle fork or wedge type tool to prevent seal or bushing damage. Next, relax the tie rod jam nut and remove the outer tie rod from the inner tie rod. For the installation, you need to attach the outer tie rod to the inner tie rod without tightening the jam nut, and then attach the outer tie rod to the Steering Knuckle. Make sure the fastener is rust-free and clean and that it reaches 2 nm (18 inch lbs.) of torque before it seats against the mate. Otherwise, replace the fastener. Finally, place on the tie rod ball stud nut and tighten it to 30 nm (22 ft. Lbs.) plus 120 degrees (2 flat surfaces) ensuring that 2.5-4.5 tie rod ends threads are visible through the tie rod nut nylon, and check and adjust toe as needed.

OEM Chevrolet Venture Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Tie Rod End found

View related parts
Chevrolet Venture Outer Tie Rod Part Number: 26086579
$69.71 MSRP: $139.96
You Save: $70.25 (51%)
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
- Position: Outer
- Replaces: 26045836, 89047698
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

Chevrolet Venture Tie Rod End

Want to cut long-term maintenance and repair costs? Choose OEM Tie Rod End. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Venture parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Venture Tie Rod End includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Tie Rod End perfectly fits at the Chevrolet Venture cars, being an important factor in the car's ability to perform well on the road. It is an important component that links the rack to the steering knuckles and enhances appropriate control of the vehicle during use. The Tie Rod End consists of two main components: inner tie rod end, and the outer tie rod end which are responsible for the attainment of smoothness in the steering control. Because of its high durability, the Tie Rod End improves the general performance of a Chevrolet Venture, making it a favorite among Chevrolet Venture consumers. Being able to work with numerous Chevrolet Venture makes and models produced from 1997 up to 2005, it is deemed important in enhancing the performance of the Vehicle, with regards to her variants such as the Base, LS, and LT. The Chevrolet Venture with flexible interior and a quite strong engine gets a lot of help from the Tie Rod End in terms of handling and security. However, among all the Tie Rod Ends available in the market, Tie Rod End perfectly fits in the automobile market due to its varieties for strength and durability. Therefore, the Tie Rod End guarantees the vehicle excellent steering performance and is a major component that defines the superior engineering of the Chevrolet Venture.

Chevrolet Venture Tie Rod End Parts and Q&A

Outer Tie Rod
26086579
Q: How to service and repair the tie rod end on Chevrolet Venture?
A:
In order to service and fix the Tie Rod End, work with j24319-b (Universal Steering Linkage Puller) to disconnect the outer tie rod from the Steering Knuckle after removing tie rod ball stud nut. Do not use a pickle fork or wedge type tool to prevent seal or bushing damage. Next, relax the tie rod jam nut and remove the outer tie rod from the inner tie rod. For the installation, you need to attach the outer tie rod to the inner tie rod without tightening the jam nut, and then attach the outer tie rod to the Steering Knuckle. Make sure the fastener is rust-free and clean and that it reaches 2 nm (18 inch lbs.) of torque before it seats against the mate. Otherwise, replace the fastener. Finally, place on the tie rod ball stud nut and tighten it to 30 nm (22 ft. Lbs.) plus 120 degrees (2 flat surfaces) ensuring that 2.5-4.5 tie rod ends threads are visible through the tie rod nut nylon, and check and adjust toe as needed.