OEM Chevrolet Tracker Radiator fan

Chevrolet Tracker Radiator fan Parts and Q&A

• Fan Blade
  30020682
  Q: How to service the radiator fan in the engine compartment on Chevrolet Tracker?

  A:

  Service of the Radiator fan starts by disconnecting the negative Battery Cable. Detach the Power Steering Reservoir while you remove the 4 fan nuts and separate the 4 Radiator shroud clips before relocating the reservoir away and avoiding Radiator damage during fan removal. The Radiator shroud should be positioned toward the motor before removing the hub-pulley connection to take out the fan and clutch unit. Start by installing the fan/clutch assembly to the vehicle before using the 4 clips to fasten the shroud. After bracket-mounting the Power Steering Reservoir consist of fan/clutch assembly installation on the pulley hub. The installation requires tightening of the 4 fan nuts to 11 nm (97 inch lbs.) while using a second wrench to stabilize the fan shaft. To complete the procedure connect the negative Battery Cable while tightening the Battery Cable bolt to 15 nm (11 ft. Lbs.).
• Fan & Motor
  91177005
  Q: How to replace the radiator fan on Chevrolet Tracker?

  A:

  Starting the Radiator fan replacement requires first removing the negative Battery Cable. Start by removing the 4 fan nuts followed by the 4 Radiator shroud clips and detach the Power Steering Reservoir before relocating it away from the Radiator to prevent damage while removing the fan. First lean the shroud toward the engine and remove the fan from the pulley hub before taking out the fan/clutch assembly. Start with fan/clutch assembly installation onto the vehicle then fasten the 4 shroud clips to complete the installation process. Install the Power Steering Reservoir on its bracket before fastening the fan/clutch assembly to the pulley hub. When installing the 4 fan nuts keep the fan shaft stable using a second wrench before tightening them to 11 nm (97 inch lbs.). The last step involves connecting the negative Battery Cable before tightening the Battery Cable bolt to 15 nm (11 ft. Lbs.).