How to service and repair the tie rod end on Chevrolet Tahoe?

Service and repair of the Tie Rod End begins by dismantling the hexagon torque prevailing nut attached to the outer tie rod stud and the tie rod seal from the outer tie rod assembly. The universal steering linkage puller (J 24319-01) should be used to extract the outer tie rod assembly from the Steering Knuckle after the hexagon jam nut on the inner tie rod assembly had been loosened. The next step will involve unconnecting the outer tie rod assembly from its position on the inner tie rod assembly. Begin assembly by attaching the outer tie rod assembly to the inner tie rod but refrain from tightening the hexagon jam nut and afterward fixing the outer tie rod assembly to the Steering Knuckle. The tie rod seal should be installed onto the outer tie rod assembly before tightening the hexagon torque prevailing nut on the outer tie rod stud . Secure the hexagon torque prevailing nut to 68 nm (50 ft. Lbs.) while also checking that the Rack and Pinion Boot maintains a smooth shape during the toe adjustment process. The inner tie rod adjustment process includes using manufacturer recommendations to set toe specifications before securing the hexagon jam nut against the outer tie rod to 68 nm (50 ft. Lbs.).

How to replace the outer rear wheel steering tie rod end on Chevrolet Tahoe?

The starting point for outer rear wheel steering Tie Rod End replacement involves hoisting the vehicle and subsequently removing the tire as well as wheel. You should start by detaching the tie rod bracket retaining bolts which secure the Steering Knuckle then loosen the tie rod jam nut. The universal steering linkage puller (J 24319-B) enables detachment of the outer Tie Rod End from the Steering Knuckle after removing the nut that retains them together. Next detach the Tie Rod End outer section from the inner rod. The correct procedure for installation starts with attaching the outer Tie Rod End to the inner tie rod followed by attaching it to the Steering Knuckle. First install and tighten the outer Tie Rod End retaining nut to the Steering Knuckle to 55 nm (40 ft. Lbs.) then proceed to add the outer Tie Rod End retaining bracket while tightening its mounting bolts to 65 nm (48 ft. Lbs.). As the last step install the tire and wheel then schedule a four-wheel alignment procedure.

OEM Chevrolet Tahoe Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Tie Rod Ends found

View related parts
Chevrolet Tahoe Outer Tie Rod Part Number: 15254061
$153.54 MSRP: $261.39
You Save: $107.85 (42%)
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 Chevrolet Tahoe | LS, LT, LTZ, PPV, SSV | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Tahoe Outer Tie Rod Part Number: 22868912
$73.55 MSRP: $125.23
You Save: $51.68 (42%)
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Tie Rod Outer; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 Chevrolet Tahoe | LS, LT, LTZ, PPV, Premier, SSV | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Tahoe Outer Tie Rod, Passenger Side Part Number: 84179763
$182.68 MSRP: $313.74
You Save: $131.06 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly-Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Rod, Steering Tie Rod Outer
- Position: Passenger Side
- Replaced by: 86544913
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Chevrolet Tahoe | Commercial, High Country, LS, LT, PPV, Premier, RST, SSV, Z71 | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Tahoe Outer Tie Rod, Driver Side Part Number: 84179762
$177.14 MSRP: $301.59
You Save: $124.45 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly-Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Rod, Steering Tie Rod Outer
- Position: Driver Side
- Replaced by: 86544912
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Chevrolet Tahoe | Commercial, High Country, LS, LT, PPV, Premier, RST, SSV, Z71 | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Tahoe Outer Tie Rod Part Number: 15895646
$61.10 MSRP: $149.08
You Save: $87.98 (60%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Tie Rod Outer; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2013 Chevrolet Tahoe | Hybrid | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
View related parts
Chevrolet Tahoe Outer Tie Rod Part Number: 26076544
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Tahoe | Base, Limited, LS, LT, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Tahoe Outer Tie Rod Part Number: 26059033
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chevrolet Tahoe | Base, Limited, LS, LT, Z71 | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Tahoe Outer Tie Rod Part Number: 19149617
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Replaces: 12471376
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2006 Chevrolet Tahoe | Base, Limited, LS, LT, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS

Chevrolet Tahoe Tie Rod End

Want to cut long-term maintenance and repair costs? Choose OEM Tie Rod End. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Tahoe parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Tahoe Tie Rod End includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

In Chevrolet Tahoe automobiles, the Tie Rod End is a significant component and part of the steering system since it holds the steering Rack on one side of the vehicle while connected to the steering Knuckles on the other side. Without this component, one cannot maintain stable motion and also cannot direct the movement of the vehicle adequately. The Tie Rod End consists of two parts: of which are the inner tie rod end and the outer tie rod end, that is employed to make correct steering responses. It is very possible that different designations of TIe Rod Ends could have been used over the years in different models of Tahoe and specific differences have not been elaborated. The basic purpose stays stable with these different types and still deals with guaranteeing predictable and proper control and driving performances.

Chevrolet Tahoe Tie Rod End Parts and Q&A

Outer Tie Rod
26059033
Q: How to service and repair the tie rod end on Chevrolet Tahoe?
A:
Service and repair of the Tie Rod End begins by dismantling the hexagon torque prevailing nut attached to the outer tie rod stud and the tie rod seal from the outer tie rod assembly. The universal steering linkage puller (J 24319-01) should be used to extract the outer tie rod assembly from the Steering Knuckle after the hexagon jam nut on the inner tie rod assembly had been loosened. The next step will involve unconnecting the outer tie rod assembly from its position on the inner tie rod assembly. Begin assembly by attaching the outer tie rod assembly to the inner tie rod but refrain from tightening the hexagon jam nut and afterward fixing the outer tie rod assembly to the Steering Knuckle. The tie rod seal should be installed onto the outer tie rod assembly before tightening the hexagon torque prevailing nut on the outer tie rod stud . Secure the hexagon torque prevailing nut to 68 nm (50 ft. Lbs.) while also checking that the Rack and Pinion Boot maintains a smooth shape during the toe adjustment process. The inner tie rod adjustment process includes using manufacturer recommendations to set toe specifications before securing the hexagon jam nut against the outer tie rod to 68 nm (50 ft. Lbs.).
Outer Tie Rod
19149617
Q: How to replace the outer rear wheel steering tie rod end on Chevrolet Tahoe?
A:
The starting point for outer rear wheel steering Tie Rod End replacement involves hoisting the vehicle and subsequently removing the tire as well as wheel. You should start by detaching the tie rod bracket retaining bolts which secure the Steering Knuckle then loosen the tie rod jam nut. The universal steering linkage puller (J 24319-B) enables detachment of the outer Tie Rod End from the Steering Knuckle after removing the nut that retains them together. Next detach the Tie Rod End outer section from the inner rod. The correct procedure for installation starts with attaching the outer Tie Rod End to the inner tie rod followed by attaching it to the Steering Knuckle. First install and tighten the outer Tie Rod End retaining nut to the Steering Knuckle to 55 nm (40 ft. Lbs.) then proceed to add the outer Tie Rod End retaining bracket while tightening its mounting bolts to 65 nm (48 ft. Lbs.). As the last step install the tire and wheel then schedule a four-wheel alignment procedure.