How to Service and Repair the Power Steering Cooler with Hydroboost on Chevrolet Tahoe?

Starting the service and repair of the Power Steering Cooler with hydroboost demands the removal of the front grille. Pretreatment of the job starts with placing a drain pan beneath the vehicle followed by fluid siphoning from the reservoir to minimize spills. You need to remove the clamps which hold the Power Steering Cooler inlet hose attached to the power steering gear and the Power Steering Cooler outlet hose joined to the Power Steering Pump. A bolt removal operation will displace the Power Steering Cooler from its radiator support attachment before extraction from the vehicle. You should attach the Power Steering Cooler to radiator support with tightening bolts set to 5 nm (44 inch lbs.). Join and secure the power steering outlet hose to the Power Steering Pump by using the retaining clamp. Secure the power steering inlet hose installation to the power steering gear by adding its retaining clamp. The power steering system will get filled with fluid then bled while inspectors check each hose connection for leakage before reinstalling the front grille.

How to replace the Power Steering Cooler with hydroboost on Chevrolet Tahoe?

The replacement process for the Power Steering Cooler starts with removing the fascia grille first. Start by removing the radiator grille reinforcement support only if the vehicle has this additional component installed. Empty as much power steering fluid from the reservoir before placing drain pans under the car. The first step involves removing both the Power Steering Cooler hose and hose which reside at the steering gear and Power Steering Pump locations. The Power Steering Cooler can be removed by first removing its bolts and evacuating the side from the car. You should place the Power Steering Cooler within the vehicle then secure it using bolts which requires 9 nm (80 lb in) torque setting. Connect hose to the Power Steering Pump while hose leads to the steering gear. Clean away all stray fluid while removing the drain containers. Reinstall the radiator grille reinforcement support only if it is available. Set the power steering system for bleeding before installing the fascia grille.

OEM Chevrolet Tahoe Power Steering Cooler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Power Steering Coolers found

View related parts
Chevrolet Tahoe Power Steering Cooler Part Number: 15186858
$220.19 MSRP: $349.59
You Save: $129.40 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler, Power Steering Fluid; Power Steering Oil Cooler
- Replaced by: 19431948
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chevrolet Tahoe | LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Tahoe Power Steering Cooler Part Number: 25918689
$122.21 MSRP: $208.03
You Save: $85.82 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler, Power Steering Fluid; Power Steering Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2014 Chevrolet Tahoe | LS, LT, LTZ, PPV, SSV | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX
View related parts
Chevrolet Tahoe Power Steering Cooler Part Number: 15295845
$134.16 MSRP: $211.08
You Save: $76.92 (37%)
Product Specifications
- Other Name: Cooler, Power Steering Fluid; Power Steering Oil Cooler
- Replaces: 26080635
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2006 Chevrolet Tahoe | Base, Limited, LS, LT, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Tahoe Power Steering Cooler Part Number: 26041420
Product Specifications
- Other Name: Cooler, Power Steering Fluid; Power Steering Oil Cooler; Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chevrolet Tahoe | Base, Limited, LS, LT, Z71 | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Tahoe Power Steering Cooler Part Number: 15295843
Product Specifications
- Other Name: Cooler, Power Steering Fluid; Power Steering Oil Cooler
- Replaces: 26081363
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Tahoe | Base, LS, LT, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Tahoe Power Steering Cooler Part Number: 15829086
$138.86 MSRP: $218.49
You Save: $79.63 (37%)
Product Specifications
- Other Name: Cooler, Power Steering Fluid; Power Steering Oil Cooler
- Replaces: 15783369
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006 Chevrolet Tahoe | Base, LS, LT, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS

Chevrolet Tahoe Power Steering Cooler

Want to cut long-term maintenance and repair costs? Choose OEM Power Steering Cooler. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Tahoe parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Tahoe Power Steering Cooler includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Tahoe Power Steering Cooler is an important part that plays a role of boosting up the efficiency of the power steering system of Chevrolet Tahoe automobile model. Intended to keep the power steering fluid from over heating, this cooler helps the Tahoe run smoothly, and protect some of its vital parts. Commonly installed on the top of the radiator support, the structure of the Power Steering Cooler looks like a small radiator with fins and tubes to expel heat to air flow. This feature is of significance with a view to preserving the effectiveness and reliability of the Chevrolet Tahoe particularly due to its immense power and mass across the models. There has been new production of Chevrolet Tahoe for five generations and it is compatible will all versions of V8 engines also the newly included 3.0L Duramax I6 turbo diesel engines of the latest versions of Chevrolet Tahoe. There are still many different types of styles used in the Power Steering Cooler from the past decades yet at the core of the designs, there is still a Vital element of the power steering system, which will make it easy to replace the cooler if there is a problem like leakage or clogging. Such a maintenance should be carried out in anticipation to ensure that the Tahoe's performance is well maintained. Comparing to the types of Chevrolet Tahoe engine components supplied in the automotive market, the Chevrolet Tahoe Power Steering Cooler is a crucial device which ensures the efficiency and safety of the car, and becomes an important prescribed component in the automotive market. As expected it has benefited the Tahoe lovers and because of its efficiency this Power Steering Cooler remains as one of the popular seller in the market.

Chevrolet Tahoe Power Steering Cooler Parts and Q&A

Power Steering Cooler
15295845
Q: How to Service and Repair the Power Steering Cooler with Hydroboost on Chevrolet Tahoe?
A:
Starting the service and repair of the Power Steering Cooler with hydroboost demands the removal of the front grille. Pretreatment of the job starts with placing a drain pan beneath the vehicle followed by fluid siphoning from the reservoir to minimize spills. You need to remove the clamps which hold the Power Steering Cooler inlet hose attached to the power steering gear and the Power Steering Cooler outlet hose joined to the Power Steering Pump. A bolt removal operation will displace the Power Steering Cooler from its radiator support attachment before extraction from the vehicle. You should attach the Power Steering Cooler to radiator support with tightening bolts set to 5 nm (44 inch lbs.). Join and secure the power steering outlet hose to the Power Steering Pump by using the retaining clamp. Secure the power steering inlet hose installation to the power steering gear by adding its retaining clamp. The power steering system will get filled with fluid then bled while inspectors check each hose connection for leakage before reinstalling the front grille.
Power Steering Cooler
15186858
Q: How to replace the Power Steering Cooler with hydroboost on Chevrolet Tahoe?
A:
The replacement process for the Power Steering Cooler starts with removing the fascia grille first. Start by removing the radiator grille reinforcement support only if the vehicle has this additional component installed. Empty as much power steering fluid from the reservoir before placing drain pans under the car. The first step involves removing both the Power Steering Cooler hose and hose which reside at the steering gear and Power Steering Pump locations. The Power Steering Cooler can be removed by first removing its bolts and evacuating the side from the car. You should place the Power Steering Cooler within the vehicle then secure it using bolts which requires 9 nm (80 lb in) torque setting. Connect hose to the Power Steering Pump while hose leads to the steering gear. Clean away all stray fluid while removing the drain containers. Reinstall the radiator grille reinforcement support only if it is available. Set the power steering system for bleeding before installing the fascia grille.