Other Name: Emblem Assembly-Lift Gate *Green; Emblem, End Gate And Rear Door Decoration; Plate, End Gate And Rear Door Decoration; Emblem,Rear End Panel And Tailgate
Replaces: 15910899, 20903626, 20903652, 15910900
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007-2013 Chevrolet Suburban 2500 | LS, LT, LTZ | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
Other Name: Plate, Front Side Door; Plate Assembly, Cab And Load Carrier Outer Side Decoration
Position: Front
Replaces: 15739483
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2000-2001 Chevrolet Suburban 2500 | Base | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
Chevrolet Suburban 2500 Emblem
Want to cut long-term maintenance and repair costs? Choose OEM Emblem. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Suburban 2500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Suburban 2500 Emblem includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.
Q: How to replace the emblem/nameplate on the pickup box on Chevrolet Suburban 2500?
A:
If you want to put on a new emblem/nameplate for the pickup box, start by gathering the tools you need: You will use the 3M(TM) Scotch Brite Molding Adhesive Remover Disk (3M(TM) P/N 07501) and the Heat Gun (J 25070) together in this process. Start the process by putting tape around where the emblem is to keep things lined up and safe. Move the Heat Gun (J 25070) 152 mm (6.0 in) away from the surface and heat the emblem/nameplate in circles for around thirty seconds. Remove the emblem/nameplate by sliding a plastic flat-bladed tool between it and the pickup box, and then use the 3M(TM) Scotch Brite Molding Adhesive Remover Disk (3M(TM) P/N 07501) to get rid of all adhesive from both the panel and the emblem. Use VMP naptha and a cloth to clean the pickup box surface. Should the position of the emblem/nameplate not be indicated, put tape down as a guide. Use the Heat Gun (J 25070) to heat the pickup box surface up to 21°C (70°F) carefully, but make sure you don't touch the adhesive on the emblem/nameplate. While you are still removing the backing, start by pressing the front end of the emblem/nameplate onto the pickup box panel and attach as you go. Use your hand to roll the emblem/nameplate and make sure it is stuck in place before you take off the tape around it.