How to replace the rear transfer case output shaft seal with a new transfer case seal on Chevrolet S10?

Begin the replacement of the rear transfer case output shaft seal by lifting the vehicle before you remove the transfer case shield. The first step involves detaching the rear propeller shaft from the transfer case before pulling out the rear output shaft seal. Perform the seal installation with your hands into the transfer case before using the output shaft seal installer (J 37668-A) to achieve proper installation. Settle the vehicle and then reattach the rear propeller shaft to the transfer case and check the fluid level before replacing the transfer case shield for vehicle descent.

OEM Chevrolet S10 Transfer Case Seal

Transfer Case Output Shaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Transfer Case Seals found

View related parts
Chevrolet S10 Extension Housing Seal, Rear Part Number: 24232325
$14.64 MSRP: $24.12
You Save: $9.48 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Bearing Retaining; Automatic Transmission Extension Housing Seal; Transmission Seal; Seal, Transmission Rear Main Bearing; Seal, Transmission Extension
- Position: Rear
- Replaces: 24201470
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Extension Seal, Rear Part Number: 15661460
$26.67 MSRP: $43.93
You Save: $17.26 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Transfer Case Rear Output Shaft; Transfer Case Gasket; Seal, Transfer Case
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Extension Housing Seal, Rear Part Number: 12549329
$11.25 MSRP: $17.85
You Save: $6.60 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Bearing Retaining; Manual Transmission Extension Housing Seal and Gasket Set.; Seal, Transmission Extension
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Output Shaft Seal, Rear Part Number: 12547638
$81.04 MSRP: $137.98
You Save: $56.94 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Transfer Case Rear Output Shaft; Automatic Transmission Seal; Gasket; Extension Seal; Seal, Transfer Case
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2004 Chevrolet S10 | Base, LS, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Extension Housing Seal, Rear Part Number: 23049636
Product Specifications
- Other Name: Seal, Rear Bearing Retaining; Manual Transmission Extension Housing Seal and Gasket Set.; Seal, Transmission Rear Main Bearing; Seal, Transmission Extension
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2004 Chevrolet S10 | Base, LS, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Extension Housing Seal Part Number: 361165
Product Specifications
- Other Name: Seal, Auto Transmission Case Extension; Manual Transmission Housing Seal; Gasket Set; Transfer Case Gasket.; Extension Seal; Seal, Transmission Rear Main Bearing; Seal, Transmission Extension
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Chevrolet S10 | Base, EL, LS, SS, Tahoe, ZR2 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Extension Housing Seal, Rear Part Number: 23049846
Product Specifications
- Other Name: Seal, Rear Bearing Retaining; Manual Transmission Extension Housing Seal and Gasket Set.; Seal, Transmission Extension
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995 Chevrolet S10 | Base, LS, SS, ZR2 | 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Extension Seal Part Number: 15634058
Product Specifications
- Other Name: Seal, Transfer Case Input Shaft; Transfer Case Gasket; Seal, Transfer Case
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2 | 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS

Chevrolet S10 Transfer Case Seal

Want to cut long-term maintenance and repair costs? Choose OEM Transfer Case Seal. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet S10 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet S10 Transfer Case Seal includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet S10 Transfer Case Seal Parts and Q&A

Output Shaft Seal, Rear
12547638
Q: How to replace the rear transfer case output shaft seal with a new transfer case seal on Chevrolet S10?
A:
Begin the replacement of the rear transfer case output shaft seal by lifting the vehicle before you remove the transfer case shield. The first step involves detaching the rear propeller shaft from the transfer case before pulling out the rear output shaft seal. Perform the seal installation with your hands into the transfer case before using the output shaft seal installer (J 37668-A) to achieve proper installation. Settle the vehicle and then reattach the rear propeller shaft to the transfer case and check the fluid level before replacing the transfer case shield for vehicle descent.