How to service the Ignition Control Module on Chevrolet Monte Carlo?

Service operations on the Ignition Control Module require switching off ignition power first. Separate the 14-way connector from the Ignition Control Module while you remove the Spark Plug Wires from the coil assemblies, documenting their initial positions. Start by unscrewing and removing the 6 stud screws which bind the coil assemblies to the Ignition Control Module to finally remove the coils from the module. Washers and 2 nuts located beneath the module bracket enable detachment of the Ignition Control Module. Secure the module on the module bracket using two nuts and washers which should be tightened to 8 n.m (70 lb in). Connect each coil to its spot on the Ignition Control Module before tightening the 6 ignition coil attaching screws to 4.5 newton meters (40 pounds inch force). You should reconnect the Spark Plug Wires together with the 14-way connector to the module.

How to replace the Ignition Control Module (ICM) on Chevrolet Monte Carlo?

To replace the Ignition Control Module (ICM), disconnect the icm electrical connector and remember the location of the Spark Plug Wires before disconnecting them from ignition coils. Then, shut off the Ignition Coil screws and pull out ignition coils from the icm : following that, take out the icm module from the module mounting bracket. Installation starts with you installing the icm to module mounting bracket then the ignition coils to the icm locking them under using Ignition Coil screws to tighten to 4.5 n.m(40 lb in). Reconnect sparks on plug wire as marked while attaching the wires and finally join icm electrical connectors.

OEM Chevrolet Monte Carlo Ignition Control Module

Ignition Spark Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Ignition Control Modules found

View related parts
Chevrolet Monte Carlo Ignition Module Part Number: 19245558
$270.29 MSRP: $555.44
You Save: $285.15 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly, Ignition Coil; Ignition Control Module; Engine Control Module; Coil Module; PCM; Module; ECM; Module, Distributor (Also Knock Sensor)
- Replaced by: 19435469
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2005 Chevrolet Monte Carlo | LS, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Control Module Part Number: 19245557
$221.80 MSRP: $455.78
You Save: $233.98 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly, Electronic Ignition Control (W/O Coil); Ignition Control Module; Ignition Module; Coil Module; Module; Bracket, Distributor (Also Knock Sensor); Module, Distributor (Also Knock Sensor)
- Replaces: 10489422
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Ignition Coil Part Number: 25518358
Product Specifications
- Other Name: Module, Distributor (Also Knock Sensor)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Chevrolet Monte Carlo | Base | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet Monte Carlo ESC Module Part Number: 16218664
Product Specifications
- Other Name: Module, Distributor (Also Knock Sensor); Ignition Control Module
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996 Chevrolet Monte Carlo | Z34 | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Knock Sensor Part Number: 16216564
Product Specifications
- Other Name: Module, Distributor (Also Knock Sensor); Ignition Control Module; ESC Module; Spark Module; ESC Control Module
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1997 Chevrolet Monte Carlo | LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Monte Carlo Ignition Module Part Number: 16052401
Product Specifications
- Other Name: Module Assembly-Electrical Spark Control; Ignition Control Module; ESC Control Module
- Replaced by: 16128261
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1988 Chevrolet Monte Carlo | Base, LS | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Monte Carlo Ignition Module Part Number: 16038331
Product Specifications
- Other Name: Module, Distributor (Also Knock Sensor); Ignition Control Module; Distributor Rotor; ESC Control Module; Rotor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986 Chevrolet Monte Carlo | Base, LS | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Monte Carlo Ignition Module Part Number: 16022654
Product Specifications
- Other Name: Module, Distributor (Also Knock Sensor); Ignition Control Module; Distributor Rotor; ESC Control Module; Rotor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 Chevrolet Monte Carlo | Base | 6 Cyl 3.8 L GAS

Chevrolet Monte Carlo Ignition Control Module

Want to cut long-term maintenance and repair costs? Choose OEM Ignition Control Module. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Monte Carlo parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Monte Carlo Ignition Control Module includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Monte Carlo Ignition Control Module Parts and Q&A

Ignition Module
19245558
Q: How to service the Ignition Control Module on Chevrolet Monte Carlo?
A:
Service operations on the Ignition Control Module require switching off ignition power first. Separate the 14-way connector from the Ignition Control Module while you remove the Spark Plug Wires from the coil assemblies, documenting their initial positions. Start by unscrewing and removing the 6 stud screws which bind the coil assemblies to the Ignition Control Module to finally remove the coils from the module. Washers and 2 nuts located beneath the module bracket enable detachment of the Ignition Control Module. Secure the module on the module bracket using two nuts and washers which should be tightened to 8 n.m (70 lb in). Connect each coil to its spot on the Ignition Control Module before tightening the 6 ignition coil attaching screws to 4.5 newton meters (40 pounds inch force). You should reconnect the Spark Plug Wires together with the 14-way connector to the module.
Control Module
19245557
Q: How to replace the Ignition Control Module (ICM) on Chevrolet Monte Carlo?
A:
To replace the Ignition Control Module (ICM), disconnect the icm electrical connector and remember the location of the Spark Plug Wires before disconnecting them from Ignition Coils. Then, shut off the Ignition Coil screws and pull out ignition coils from the icm : following that, take out the icm module from the module mounting bracket. Installation starts with you installing the icm to module mounting bracket then the ignition coils to the icm locking them under using Ignition Coil screws to tighten to 4.5 n.m(40 lb in). Reconnect sparks on plug wire as marked while attaching the wires and finally join icm electrical connectors.