How to service the camshaft position sensor on Chevrolet Monte Carlo?

First turn off the ignition then remove the serpentine belt and proceed to take off the Water Pump Pulley. Vehicle lifting caution must be observed at this point before using the lift. The next task involves taking out the right front splash shield while also disconnecting the electrical connector that serves the Camshaft Position Sensor. First remove the retaining screw then extract the camshaft position (CMP) sensor from its place on the engine front cover. To install the Camshaft Position Sensor you must place it on the engine front cover and fasten it with the retaining bolt at 5 n.m (44 lb in). Place back the serpentine belt followed by reinstalling the Water Pump Pulley while tightening its bolts to 10 n.m (89 lb in). Reattach the electrical connector to the Camshaft Position Sensor. The right front splash shield should now be replaced along with repeating the vehicle lifting caution process before slowly lowering the vehicle.

How to replace the Camshaft Position Sensor on Chevrolet Monte Carlo?

A replacement of the camshaft position (CMP) sensor begins with turning off the ignition before removing the Power Steering Pump. Disconnect the cmp sensor yet remove its attaching bolt and the sensor itself. When keeping the sensor check its o-ring for damage along with any evidence of wear and cracks or leakage. Cleaning engine oil should be used to lubricate the o-ring before installing the component. Replace the o-ring when it shows any damage signs. Place the Camshaft Position Sensor in position then fasten the retaining bolt to 10 n.m (89 lb in). The cmp sensor electrical connector needs to be connected following Power Steering Pump reinstallation.

OEM Chevrolet Monte Carlo Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Camshaft Position Sensors found

View related parts
Chevrolet Monte Carlo Camshaft Position Sensor Part Number: 10456242
$57.85 MSRP: $193.84
You Save: $135.99 (71%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor; Cam Sensor
- Replaces: 10456175
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chevrolet Monte Carlo | Z34 | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Camshaft Position Sensor Part Number: 12598209
$29.44 MSRP: $55.29
You Save: $25.85 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor
- Replaces: 12577683
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Camshaft Position Sensor Part Number: 12576607
$30.18 MSRP: $56.67
You Save: $26.49 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Camshaft Position Sensor Part Number: 12580470
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Camshaft Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | SS | 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Camshaft Position Sensor Part Number: 24508214
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Camshaft Sensor
- Replaces: 24506903
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Monte Carlo | LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Monte Carlo Camshaft Position Sensor Part Number: 12567650
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor
- Replaces: 24507588
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Camshaft Position Sensor Part Number: 10456148
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Crankshaft Position Sensor; Crankshaft Sensor; Camshaft Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2005 Chevrolet Monte Carlo | LS, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.8 L GAS

Chevrolet Monte Carlo Camshaft Position Sensor

Want to cut long-term maintenance and repair costs? Choose OEM Camshaft Position Sensor. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Monte Carlo parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Monte Carlo Camshaft Position Sensor includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Camshaft Position Sensor of Chevrolet Monte Carlo is an essential device responsible for measuring and informing the engine control module about the camshaft's position and its speed needed for the management of fuel injectors and ignition timing. Usually installed directly upon the camshaft, the integration of the sensor differs according to the given model of a vehicle. In addition to functioning with the crank sensor, the Camshaft Position Sensor assists in the proper coordination of the engine mechanisms to ensure accurate fuel spraying occasion and pace measurment of the engine. This video shows how a bad Camshaft Position Sensor can dampen the engine's performance, why maintenance and checkups are crucial.

Chevrolet Monte Carlo Camshaft Position Sensor Parts and Q&A

Camshaft Position Sensor
10456148
Q: How to service the camshaft position sensor on Chevrolet Monte Carlo?
A:
First turn off the ignition then remove the serpentine belt and proceed to take off the Water Pump Pulley. Vehicle lifting caution must be observed at this point before using the lift. The next task involves taking out the right front splash shield while also disconnecting the electrical connector that serves the Camshaft Position Sensor. First remove the retaining screw then extract the camshaft position (CMP) sensor from its place on the engine front cover. To install the Camshaft Position Sensor you must place it on the engine front cover and fasten it with the retaining bolt at 5 n.m (44 lb in). Place back the serpentine belt followed by reinstalling the Water Pump Pulley while tightening its bolts to 10 n.m (89 lb in). Reattach the electrical connector to the Camshaft Position Sensor. The right front splash shield should now be replaced along with repeating the vehicle lifting caution process before slowly lowering the vehicle.
Camshaft Position Sensor
12567650
Q: How to replace the Camshaft Position Sensor on Chevrolet Monte Carlo?
A:
A replacement of the camshaft position (CMP) sensor begins with turning off the ignition before removing the Power Steering Pump. Disconnect the cmp sensor yet remove its attaching bolt and the sensor itself. When keeping the sensor check its o-ring for damage along with any evidence of wear and cracks or leakage. Cleaning engine oil should be used to lubricate the o-ring before installing the component. Replace the o-ring when it shows any damage signs. Place the Camshaft Position Sensor in position then fasten the retaining bolt to 10 n.m (89 lb in). The cmp sensor electrical connector needs to be connected following Power Steering Pump reinstallation.