How to replace the axle shaft on Chevrolet Monte Carlo?

Vehicle preparation starts with elevation and proper support for Axle Shaft replacement. You need to remove first the wheel along with tire before moving onto the stabilizer shaft link. The drift or flat-bladed tool will stop the rotor from spinning during front Axle Shaft nut removal. First disconnect the Steering Knuckle from the outer tie rod assembly while you separate the Ball Joint connection from the same knuckle. Driving the vehicle with axle(s) removed will lead to both vehicle damage and personal injury so caution should be exercised. The j 28733-b front hub spindle remover (J 28733-B) allows technicians to disconnect the front axle from the front Axle Shaft bearing so they can partially reinstall the nut to safeguard the threads. Separate the right-side front axle from the transaxle through a combination of the j 33008 Axle Shaft remover (J 33008), j 29794 extension (J 29794), and j 2619-01 slide hammer (J 2619-01) tools while simultaneously using the frame and a flat-bladed tool in the groove on the front Axle Shaft tripot joint for the left side. The front axle must be placed into the transaxle while verifying that the retaining ring has a correct position. Place the front axle inside the front Axle Shaft bearing and reconnect the Ball Joint to the Steering Knuckle before connecting the outer tie rod assembly. Carefully use each fastener on its designated spot and select correct part numbers while staying clear of torque-affecting coatings. Fasten a new front Axle Shaft nut tightly at 215 nm (159 ft. Lbs.) by placing either a drift or flat-bladed tool between the shaft and rotor. Closer inspection of transaxle fluid level and wheel alignment follows stabilizer shaft link and wheel and tire reinstallation before you lower the vehicle.

OEM Chevrolet Monte Carlo Axle Shaft

Car Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Axle Shafts found

View related parts
Chevrolet Monte Carlo Axle Assembly, Front Passenger Side Part Number: 23191340
$252.52 MSRP: $474.22
You Save: $221.70 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft, Front Wheel Drive Axle; CV Axle Assembly; Axle Shaft; CV Axle; Axle
- Position: Front Passenger Side
- Replaces: 20859643, 26073396, 26073385, 88965660, 88965658
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2007 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Monte Carlo Axle Assembly, Front Driver Side Part Number: 20859642
Product Specifications
- Other Name: Shaft Assembly-Front Wheel Drive; CV Axle Assembly; Axle Shaft; CV Axle; Axle; Shaft, Front Wheel Drive Axle
- Position: Front Driver Side
- Replaces: 26073399, 88965659, 88965657, 26073386
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2007 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Monte Carlo Axle Assembly, Front Passenger Side Part Number: 19256583
Product Specifications
- Other Name: Shaft, Front Wheel Drive; CV Axle Assembly; Axle Shaft; CV Axle; Shaft, Front Wheel Drive Axle
- Position: Front Passenger Side
- Replaces: 26073392, 88965661
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Monte Carlo | LT, SS | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Axle Assembly, Front Driver Side Part Number: 15850526
Product Specifications
- Other Name: Shaft, Front Wheel Drive Axle; CV Axle Assembly; Axle Shaft; CV Axle
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | SS | 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Axle Assembly Part Number: 26064130
Product Specifications
- Other Name: Shaft Kit; Axle Shaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-1999 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Axle Assembly, Front Part Number: 26064129
Product Specifications
- Other Name: Shaft Kit, Front Wheel Drive; Axle Shaft
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-1999 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Axle Shaft Part Number: 26040555
Product Specifications
- Other Name: Shaft, Front; Axle Shafts; Shaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-1999 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, Z34 | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Axle Shaft, Rear Part Number: 22512850
Product Specifications
- Other Name: Shaft, Rear Axle Drive; Axle Shafts
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1988 Chevrolet Monte Carlo | Base, LS, SS | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Chevrolet Monte Carlo Axle Assembly, Front Part Number: 26040719
Product Specifications
- Other Name: Shaft Kit, Front Wheel Drive; CV Axle Assembly; Axle Shaft; CV Axle; Shaft Kit, Front Wheel Drive Axle
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Axle Assembly, Front Part Number: 26040718
Product Specifications
- Other Name: Shaft Kit, Front Wheel Drive; CV Axle Assembly; Axle Shaft; CV Axle; Shaft Kit, Front Wheel Drive Axle
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Axle Assembly, Front Part Number: 26019842
Product Specifications
- Other Name: Shaft Kit Front Wheel Drive; CV Axle Assembly; Axle Shaft; CV Axle; Shaft Kit, Front Wheel Drive Axle
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Axle Assembly, Front Passenger Side Part Number: 26019841
Product Specifications
- Other Name: Shaft Kit-Front Wheel Drive; CV Axle Assembly; Axle Shaft; CV Axle; Shaft Kit, Front Wheel Drive Axle
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Axle Assembly, Front Passenger Side Part Number: 15850525
Product Specifications
- Other Name: Shaft, Front Wheel Drive Axle; CV Axle Assembly; Axle Shaft; CV Axle
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | SS | 8 Cyl 5.3 L GAS

Chevrolet Monte Carlo Axle Shaft

Want to cut long-term maintenance and repair costs? Choose OEM Axle Shaft. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Monte Carlo parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Monte Carlo Axle Shaft includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Axle Shaft of Chevrolet Monte Carlo autos is an important part with the capacity to turn individually to ensure better grip to the ground for the vehicle's wheels. These steel shafts are also in different forms including solid axles primarily found on trucks/older RWD car while the halfshafts are for vehicles that have independent suspension. A fixed transaxle is incorporated and the differential and axle shafts are situated on the axles, while half shafts transmit torque from the transaxle to the wheels. Axle shafts may get rusty and worn from the ground contact hence may require new bearings or seals while the halfshaft may need repair because the CV Joints may be worn out or the boots may have rips and may cause noise and vibrations. In general, the Axle Shaft is a critical component on the Chevrolet Monte Carlo cars that supports the car weight, transfers the driving torque, and ensures the correct wheel positioning.

Chevrolet Monte Carlo Axle Shaft Parts and Q&A

Axle Assembly, Front Passenger Side
23191340
Q: How to replace the axle shaft on Chevrolet Monte Carlo?
A:
Vehicle preparation starts with elevation and proper support for Axle Shaft replacement. You need to remove first the wheel along with tire before moving onto the stabilizer shaft link. The drift or flat-bladed tool will stop the rotor from spinning during front Axle Shaft nut removal. First disconnect the Steering Knuckle from the outer tie rod assembly while you separate the Ball Joint connection from the same knuckle. Driving the vehicle with axle(s) removed will lead to both vehicle damage and personal injury so caution should be exercised. The j 28733-b front hub spindle remover (J 28733-B) allows technicians to disconnect the front axle from the front Axle Shaft bearing so they can partially reinstall the nut to safeguard the threads. Separate the right-side front axle from the transaxle through a combination of the j 33008 Axle Shaft remover (J 33008), j 29794 extension (J 29794), and j 2619-01 slide hammer (J 2619-01) tools while simultaneously using the frame and a flat-bladed tool in the groove on the front Axle Shaft tripot joint for the left side. The front axle must be placed into the transaxle while verifying that the retaining ring has a correct position. Place the front axle inside the front Axle Shaft bearing and reconnect the Ball Joint to the Steering Knuckle before connecting the outer tie rod assembly. Carefully use each fastener on its designated spot and select correct part numbers while staying clear of torque-affecting coatings. Fasten a new front Axle Shaft nut tightly at 215 nm (159 ft. Lbs.) by placing either a drift or flat-bladed tool between the shaft and rotor. Closer inspection of transaxle fluid level and wheel alignment follows stabilizer shaft link and wheel and tire reinstallation before you lower the vehicle.