How to service and repair the engine mount on Chevrolet Impala?

Install the Universal Engine Support Fixture (J28467-B) before engine lifting to weightlessly position the engine mount and generate strain in the rubber material. Check for the following conditions while lifting the engine: heat check cracks on the hard rubber and any rubber separation from metal plates or engine mount splits across its center. Engine height reduction followed by tightening bolts or nuts linking the engine mount to its frame or bracket will fix any detected movement between plate surfaces. Proper use of the Engine Support Adapters (J 28467-90A) together with Engine Support Adapter Leg Set (J 36462-A) should be included as needed during maintenance operations.

How to replace the left engine mount on Chevrolet Impala?

The repair process for a left Engine Mount starts with taking out the Engine Mount strut followed by removing the left Exhaust Manifold before you detach the upper Engine Mount nuts. The engine support fixture must be installed before the engine is raised using it. After disconnecting the Engine Mount bracket bolts it is necessary to take out both the Engine Mount bracket and the Engine Mount bracket. Before beginning raise the vehicle along with support. After this remove the lower Engine Mount nuts and take away both the Engine Mount and Engine Mount heat shield (if required). Start your installation by putting back the Engine Mount heat shield if you took it off before you attach the Engine Mount to its engine position. Follow installation order by placing the lower Engine Mount nuts before tightening them to 50 nm (37 ft. Lbs.). When ready install the Engine Mount bracket while lowering the vehicle then fasten all bracket bolts to 50 nm (37 ft. Lbs.). The engine support fixture permits lowering the engine before removing the fixture. Begin by attaching the left Exhaust Manifold followed by installing the Engine Mount strut then proceed to tighten the upper Engine Mount nuts to 50 nm (37 ft. Lbs.).

OEM Chevrolet Impala Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

37 Engine Mounts found

View related parts
Chevrolet Impala Strut Bracket, Passenger Side Part Number: 12577766
$24.60 MSRP: $40.55
You Save: $15.95 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Strut Rear Bracket; Bracket, A/C Compressor Mounting
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Impala Motor Mount Part Number: 10448575
$69.62 MSRP: $118.53
You Save: $48.91 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Spring Insulator; Lower Mount; Mount Insulator; Mount; Mount, Engine Mounting; Engine Mount
- Replaces: 17998813, 22113282, 22178657, 22146018, 22175206, 10340740, 10448574, 10448576, 22146466
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2011 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Impala Rear Mount Bracket Part Number: 20825885
$70.18 MSRP: $119.47
You Save: $49.29 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Mount; Motor Mount
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2013 Chevrolet Impala | LS, LT, LTZ, Police | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Front Mount Bracket Part Number: 10345832
$59.56 MSRP: $93.31
You Save: $33.75 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2009 Chevrolet Impala | SS | 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Mount Part Number: 14082803
$51.94 MSRP: $88.43
You Save: $36.49 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Engine; Engine Mount Bracket; Motor Mount
- Replaced by: 22188284
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 Chevrolet Impala | Base | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Strut Bracket Part Number: 10306033
$53.33 MSRP: $89.95
You Save: $36.62 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Motor Mount
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2009 Chevrolet Impala | SS | 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Strut Mount Part Number: 10232891
$137.10 MSRP: $195.31
You Save: $58.21 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Lift; Torque Strut Mount; Motor Mount; Mount Bracket; Strut Bracket; Strut Mount Bracket; Strut Lower Bracket; Bracket, Engine Mounting
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | Base | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Impala Motor Mount Part Number: 23144105
$103.59 MSRP: $177.91
You Save: $74.32 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount Assembly-Engine; Engine Mount Bracket; Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
- Replaces: 13327296
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Impala | LS, LT, LTZ | 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
View related parts
Chevrolet Impala Mount Bracket Part Number: 10216970
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Transmission Mount; Motor Mount; Engine Bracket; Lower Bracket; Bracket
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2011 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LT, LTZ, Police | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Impala Mount Bracket Part Number: 10321856
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Transmission Mount; Motor Mount; Engine Bracket; Bracket
- Replaces: 10243884
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | Base, LS, LS Sport, SS | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Rear Mount Bracket Part Number: 10306029
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Mount; Motor Mount
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2009 Chevrolet Impala | SS | 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Strut Bracket, Driver Side Part Number: 24503458
Product Specifications
- Other Name: Bracket, Engine Lift; Engine Mount Bracket; Transmission Mount; Motor Mount; Engine Bracket; Lift Bracket; Upper Bracket; Strut Front Bracket; Bracket; Bracket, Engine Mounting
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | Base, LS, LS Sport, SS | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Strut Mount Part Number: 10345904
$112.44 MSRP: $176.94
You Save: $64.50 (37%)
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Torque Strut Mount; Engine Mount Bracket; Motor Mount
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Strut Bracket, Passenger Side Part Number: 24506489
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Engine Bracket; Lower Brace
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | Base, LS, LS Sport, SS | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Motor Mount Bracket, Passenger Side Part Number: 10201937
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Engine Bracket; Bracket
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Mount Bracket Part Number: 10213125
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Transmission Mount; Motor Mount; Motor Mount Bracket; Transmission Mount Bracket; Engine Bracket; Bracket
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996, 1984-1985 Chevrolet Impala | Base, SS | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Strut Bracket, Passenger Side Part Number: 24506488
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Engine Bracket; Upper Bracket
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | Base, LS, LS Sport, SS | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Strut Bracket, Passenger Side Part Number: 24507211
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Engine Bracket; Upper Bracket; Strut Front Bracket
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Impala | Base, LS, SS | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Motor Mount Part Number: 22188876
Product Specifications
- Other Name: Mount; Engine Mount Torque Strut; Engine Mount Bracket; Front Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
- Replaces: 01258718, 01258666, 1258666, 25504647, 1258718, 25504643
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Chevrolet Impala | Base | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Mount Bracket Part Number: 24504390
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Transmission Mount; Motor Mount; Strut Bracket; Engine Bracket; Compressor Mount Bracket; Torque Strut Bracket; A/C Compressor Mounting.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | Base | 6 Cyl 3.4 L GAS

| Page 1 of 2 |Next >

1-20 of 37 Results

Chevrolet Impala Engine Mount

Want to cut long-term maintenance and repair costs? Choose OEM Engine Mount. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Impala parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Impala Engine Mount includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Impala Engine Mount Parts and Q&A

Strut Mount
10271462
Q: How to service and repair the engine mount on Chevrolet Impala?
A:
Install the Universal Engine Support Fixture (J28467-B) before engine lifting to weightlessly position the engine mount and generate strain in the rubber material. Check for the following conditions while lifting the engine: heat check cracks on the hard rubber and any rubber separation from metal plates or engine mount splits across its center. Engine height reduction followed by tightening bolts or nuts linking the engine mount to its frame or bracket will fix any detected movement between plate surfaces. Proper use of the Engine Support Adapters (J 28467-90A) together with Engine Support Adapter Leg Set (J 36462-A) should be included as needed during maintenance operations.
Strut
10345905
Q: How to replace the left engine mount on Chevrolet Impala?
A:
The repair process for a left Engine Mount starts with taking out the Engine Mount strut followed by removing the left Exhaust Manifold before you detach the upper Engine Mount nuts. The engine support fixture must be installed before the engine is raised using it. After disconnecting the Engine Mount bracket bolts it is necessary to take out both the Engine Mount bracket and the Engine Mount bracket. Before beginning raise the vehicle along with support. After this remove the lower Engine Mount nuts and take away both the Engine Mount and Engine Mount heat shield (if required). Start your installation by putting back the Engine Mount heat shield if you took it off before you attach the Engine Mount to its engine position. Follow installation order by placing the lower Engine Mount nuts before tightening them to 50 nm (37 ft. Lbs.). When ready install the Engine Mount bracket while lowering the vehicle then fasten all bracket bolts to 50 nm (37 ft. Lbs.). The engine support fixture permits lowering the engine before removing the fixture. Begin by attaching the left Exhaust Manifold followed by installing the Engine Mount strut then proceed to tighten the upper Engine Mount nuts to 50 nm (37 ft. Lbs.).