How to replace the fuel level sensor on Chevrolet Colorado?

Start by sanitizing the fuel pipe attachments and hose fittings and nearby regions before commencing the Fuel Level Sensor replacement operation. The first step requires removing the Fuel Tank before disconnecting the evaporative emission (EVAP) line quick connect fittings between the module and vent valve. Besides this disconnecting step comes removal of the evap line from the Fuel Tank side clip and disassembly of its retention features. To begin remove the fuel feed line quick connect fitting from the module then remove it from its retaining feature which is molded into the Fuel Tank. The j 45722 (Fuel Sender Lock Ring Tool) needs installation onto the Fuel Pump module lock ring while also protecting the lock ring from damage and maintaining both hands away from the fuel pipes. The technician should use the j 45722 tool and breaker-bar to rotate the lock ring counterclockwise until it unlocks before removing the tool to raise the module from the tank. Tipping the module will allow clearance for the sensor arm and float. Remove and throw away the old Fuel Pump module seal before draining the fuel into an authorized container. Checking the sealing surface of the Fuel Pump module remains a necessary step before examining the lock ring for any signs of damage or estimating warpage beyond 0.41 mm (0.016 in). If such warpage is detected, a new lock ring needs to be installed. Installation requires cleaning the male port on the Fuel Pump module while applying new Fuel Tank module seal on the Fuel Tank before inserting the module making sure the sensor arm and float do not obstruct the opening. Begin by placing the module in position and setting the tang to fit the notch of the Fuel Tank before installing the lock ring. With the j 45722 turn the lock ring clockwise and fasten it before joining the fuel feed line quick connect to the module tank retention feature. The evap line quick connect fittings must be applied to the module and vent valve while fitting into the tank retaining features before placing them onto the Fuel Tank clip on the side wall.

How to service and repair the Fuel Level Sensor on Chevrolet S10?

The service and repair process of the Fuel Level Sensor begins by disconnecting the negative Battery Cable followed by relieving the fuel system pressure. The appropriate procedures must be used to drain the Fuel Tank depending on whether the vehicle is a pick up or 2-door utility. The service begins by taking out the Fuel Tank together with the fuel sender assembly before separating the connections on the fuel pump electrical connector and the Fuel Level Sensor electrical connector retaining clip . The service process begins by releasing the Fuel Level Sensor electrical connector under the fuel sender cover. This action allows removal of the Fuel Level Sensor retaining clip while you squeeze its locking tangs to remove the sensor. Install your tasks starting with the Fuel Level Sensor followed by its retaining clip and then proceed to the Fuel Level Sensor electrical connector followed by its retaining clip before connecting the fuel pump electrical connector. Put back the fuel sender assembly as well as the Fuel Tank then top up the tank before returning the fuel filler cap. To conclude the repair process, reconnect the negative Battery Cable while conducting a leakage check by first turning the ignition on for two seconds followed by off for ten seconds before returning to on to inspect for fuel leaks.

OEM Chevrolet Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

316 Fuel Level Sensors found

View related parts
Chevrolet Fuel Gauge Sending Unit Part Number: 13504929
$60.28 MSRP: $123.88
You Save: $63.60 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Kit-Fuel Level; Fuel Level Sensor; Fuel Sending Unit; Sensor Kit, Fuel Tank Meter/Pump
Fits the following Chevrolet Models:
- Silverado 3500 HD | 2011-2016 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
View related parts
Chevrolet Fuel Gauge Sending Unit Part Number: 13512503
$39.59 MSRP: $119.63
You Save: $80.04 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Fuel Level; Fuel Level Sensor; Fuel Sending Unit; Level Sensor; Sensor Kit, Fuel Tank Meter/Pump
- Replaced by: 19541082
- Replaces: 19208886, 13505180, 13581648
Fits the following Chevrolet Models:
- Impala | 2014-2020 | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
- Malibu | 2013-2015 | Eco, LS, LT, LTZ | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS
- Malibu Limited | 2016 | LS, LT, LTZ | 4 Cyl 2.5 L GAS
View More
View related parts
Chevrolet Level Sensor Part Number: 19122011
$75.17 MSRP: $154.48
You Save: $79.31 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Kit, Fuel Tank Meter/Pump; Fuel Level Sensor
Fits the following Chevrolet Models:
- Colorado | 2006-2008 | LS, LT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
Chevrolet Fuel Gauge Sending Unit Part Number: 84777088
$25.47 MSRP: $46.11
You Save: $20.64 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Kit-Fuel Level; Fuel Level Sensor; Fuel Sending Unit; Level Sensor; Sensor Kit, Fuel Tank Meter/Pump
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2020-2024 | Custom, High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
View related parts
Chevrolet Fuel Gauge Sending Unit Part Number: 84212973
$38.78 MSRP: $107.87
You Save: $69.09 (65%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Kit-Fuel Level; Fuel Level Sensor; Fuel Sending Unit; Sensor Kit, Fuel Tank Meter/Pump
Fits the following Chevrolet Models:
- Silverado 3500 HD | 2017-2019 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
View related parts
Chevrolet Fuel Gauge Sending Unit Part Number: 13581916
$57.75 MSRP: $160.63
You Save: $102.88 (65%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Kit-Fuel Level; Fuel Level Sensor; Fuel Sending Unit; Sensor Kit, Fuel Tank Meter/Pump
- Replaces: 13505233
Fits the following Chevrolet Models:
- Silverado 3500 HD | 2011-2014 | LT, LTZ, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Fuel Gauge Sending Unit Part Number: 84212967
$45.65 MSRP: $126.97
You Save: $81.32 (65%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Kit-Fuel Level; Fuel Level Sensor; Fuel Sending Unit; Sensor Kit, Fuel Tank Meter/Pump
- Replaces: 84089923
Fits the following Chevrolet Models:
- Silverado 3500 HD | 2017-2019 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
View related parts
Chevrolet Fuel Gauge Sending Unit Part Number: 84692013
$29.16 MSRP: $52.79
You Save: $23.63 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Kit-Fuel Level; Fuel Level Sensor; Fuel Sending Unit; Sensor Kit, Fuel Tank Meter/Pump
- Replaced by: 86598999
Fits the following Chevrolet Models:
- Silverado 3500 HD | 2020-2023 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
View related parts
Chevrolet Fuel Gauge Sending Unit Part Number: 19206547
$66.41 MSRP: $184.72
You Save: $118.31 (65%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Kit, Fuel Tank Meter/Pump; Fuel Level Sensor; Fuel Sending Unit
- Replaced by: 19435138
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2008-2010 | LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
- Silverado 3500 HD | 2008-2010 | LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
View related parts
Chevrolet Fuel Gauge Sending Unit Part Number: 13585450
$105.08 MSRP: $215.90
You Save: $110.82 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Kit-Fuel Level; Fuel Level Sensor; Fuel Sending Unit; Level Sensor; Sensor Kit, Fuel Tank Meter/Pump
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2015-2016 | High Country, LT, LTZ, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
- Silverado 3500 HD | 2015-2016 | High Country, LT, LTZ, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Level Sensor Part Number: 84829013
$35.43 MSRP: $66.53
You Save: $31.10 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Kit-Fuel Level; Fuel Level Sensor; Sensor Kit, Fuel Tank Meter/Pump
- Replaced by: 19541042
- Replaces: 84174274
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2017-2019 | High Country, LT, LTZ, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
- Silverado 3500 HD | 2017-2019 | High Country, LT, LTZ, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Fuel Gauge Sending Unit Part Number: 84084766
$75.01 MSRP: $215.14
You Save: $140.13 (66%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Kit-Fuel Level; Fuel Level Sensor; Fuel Sending Unit; Level Sensor; Sensor Kit, Fuel Tank Meter/Pump
- Replaces: 23240487, 22753589, 19167429
Fits the following Chevrolet Models:
- Traverse | 2009-2017 | LS, LT, LTZ, Premier | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Level Sensor, Driver Side Part Number: 13504722
$75.98 MSRP: $142.69
You Save: $66.71 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Kit, Fuel Tank Meter/Pump; Fuel Level Sensor
- Position: Driver Side
Fits the following Chevrolet Models:
- Captiva Sport | 2012-2015 | LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 6 Cyl 3.0 L FLEX
View related parts
Chevrolet Fuel Gauge Sending Unit Part Number: 19210797
$87.75 MSRP: $180.33
You Save: $92.58 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Kit, Fuel Tank Meter/Pump; Fuel Level Sensor; Fuel Sending Unit; Level Sensor
- Replaces: 19168388
Fits the following Chevrolet Models:
- Impala | 2008-2011 | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Fuel Gauge Sending Unit Part Number: 19133499
$164.12 MSRP: $337.28
You Save: $173.16 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Kit, Fuel Tank Meter/Pump; Fuel Level Sensor; Fuel Sending Unit
- Replaces: 88965424
Fits the following Chevrolet Models:
- Express 1500 | 2004-2007 | Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
- Express 2500 | 2004-2007 | Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Express 3500 | 2004-2007 | Base, LS, LT | 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L GAS
View More
View related parts
Chevrolet Fuel Gauge Sending Unit, Passenger Side Part Number: 13504704
$76.43 MSRP: $138.36
You Save: $61.93 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Kit-Fuel Level; Fuel Level Sensor; Fuel Sending Unit; Level Sensor; Sensor Kit, Fuel Tank Meter/Pump
- Position: Passenger Side
Fits the following Chevrolet Models:
- Equinox | 2010-2017 | LT, LTZ, Premier | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Fuel Gauge Sending Unit, Passenger Side Part Number: 13544260
$58.07 MSRP: $119.33
You Save: $61.26 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Kit-Fuel Level; Fuel Level Sensor; Fuel Sending Unit; Level Sensor; Sensor Kit, Fuel Tank Meter/Pump
- Position: Passenger Side
- Replaced by: 19541049
Fits the following Chevrolet Models:
- Camaro | 2016-2022 | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Level Sensor Part Number: 19206570
Product Specifications
- Other Name: Sensor Kit, Fuel Tank Meter/Pump; Fuel Level Sensor
Fits the following Chevrolet Models:
- Silverado 1500 | 2009 | Hybrid, LS, LT, LTZ, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
- Silverado 2500 HD | 2009 | LT, LTZ, WT | 8 Cyl 6.0 L GAS
- Silverado 3500 HD | 2009 | LT, LTZ, WT | 8 Cyl 6.0 L GAS
View More
View related parts
Chevrolet Fuel Gauge Sending Unit Part Number: 19206530
$80.55 MSRP: $143.84
You Save: $63.29 (44%)
Product Specifications
- Other Name: Sensor Kit, Fuel Tank Meter/Pump; Fuel Level Sensor; Fuel Sending Unit
Fits the following Chevrolet Models:
- Silverado 1500 | 2009 | LT, LTZ, WT
View related parts
Chevrolet Fuel Gauge Sending Unit Part Number: 88965792
$117.60 MSRP: $210.95
You Save: $93.35 (45%)
Product Specifications
- Other Name: Sensor Kit, Fuel Tank Meter/Pump; Fuel Level Sensor; Fuel Sending Unit; Level Sensor
- Replaces: 25320536
Fits the following Chevrolet Models:
- Astro | 2000-2005 | Base, LS, LT | 6 Cyl 4.3 L GAS

| Page 1 of 16 |Next >

1-20 of 316 Results

Chevrolet Fuel Level Sensor

Choose OEM Fuel Level Sensor, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Chevrolet's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Chevrolet Fuel Level Sensor. You can shop at highly competitive prices and protect your budget. All our genuine Chevrolet parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Chevrolet Fuel Level Sensor Parts and Q&A

Fuel Gauge Sending Unit
19207814
Q: How to replace the fuel level sensor on Chevrolet Colorado?
A:
Start by sanitizing the fuel pipe attachments and hose fittings and nearby regions before commencing the Fuel Level Sensor replacement operation. The first step requires removing the Fuel Tank before disconnecting the evaporative emission (EVAP) line quick connect fittings between the module and vent valve. Besides this disconnecting step comes removal of the evap line from the Fuel Tank side clip and disassembly of its retention features. To begin remove the fuel feed line quick connect fitting from the module then remove it from its retaining feature which is molded into the Fuel Tank. The j 45722 (Fuel Sender Lock Ring Tool) needs installation onto the Fuel Pump module lock ring while also protecting the lock ring from damage and maintaining both hands away from the fuel pipes. The technician should use the j 45722 tool and breaker-bar to rotate the lock ring counterclockwise until it unlocks before removing the tool to raise the module from the tank. Tipping the module will allow clearance for the sensor arm and float. Remove and throw away the old Fuel Pump module seal before draining the fuel into an authorized container. Checking the sealing surface of the Fuel Pump module remains a necessary step before examining the lock ring for any signs of damage or estimating warpage beyond 0.41 mm (0.016 in). If such warpage is detected, a new lock ring needs to be installed. Installation requires cleaning the male port on the Fuel Pump module while applying new Fuel Tank module seal on the Fuel Tank before inserting the module making sure the sensor arm and float do not obstruct the opening. Begin by placing the module in position and setting the tang to fit the notch of the Fuel Tank before installing the lock ring. With the j 45722 turn the lock ring clockwise and fasten it before joining the fuel feed line quick connect to the module tank retention feature. The evap line quick connect fittings must be applied to the module and vent valve while fitting into the tank retaining features before placing them onto the Fuel Tank clip on the side wall.
Fuel Gauge Sending Unit
19121304
Q: How to service and repair the Fuel Level Sensor on Chevrolet S10?
A:
The service and repair process of the Fuel Level Sensor begins by disconnecting the negative Battery Cable followed by relieving the fuel system pressure. The appropriate procedures must be used to drain the Fuel Tank depending on whether the vehicle is a pick up or 2-door utility. The service begins by taking out the Fuel Tank together with the fuel sender assembly before separating the connections on the fuel pump electrical connector and the Fuel Level Sensor electrical connector retaining clip . The service process begins by releasing the Fuel Level Sensor electrical connector under the fuel sender cover. This action allows removal of the Fuel Level Sensor retaining clip while you squeeze its locking tangs to remove the sensor. Install your tasks starting with the Fuel Level Sensor followed by its retaining clip and then proceed to the Fuel Level Sensor electrical connector followed by its retaining clip before connecting the fuel pump electrical connector. Put back the fuel sender assembly as well as the Fuel Tank then top up the tank before returning the fuel filler cap. To conclude the repair process, reconnect the negative Battery Cable while conducting a leakage check by first turning the ignition on for two seconds followed by off for ten seconds before returning to on to inspect for fuel leaks.