How to replace the rear door emblem/nameplate on Chevrolet Express 3500?

Begin by heating the emblem/nameplate using a J 25070 heat gun while keeping the device 152 mm (6 inches) from the surface then move the gun in circular motions for about 30 seconds. A flat-bladed plastic tool should be used to carefully remove the emblem/nameplate from the panel while a 3M(R) P/N 07501 or equivalent substance should be used to remove all adhesive from both body panel and emblem/nameplate back. Wash the damaged panel before drying it with a clean lint-free material. The panel requires cleaning with a 50/50 mixture of isopropyl alcohol and water and a clean lint-free cloth to eliminate existing adhesive residue. This process should be followed by using 3M(R) General Purpose Adhesive Cleaner 08984 or an equivalent to remove all traces of adhesive. Prior to placement mark the installation spot using masking tape or a magnetic strip while keeping both rear doors safely bolted in position. Position the emblem/nameplate for the right rear door at 47.5 mm (+/- 2 mm) (1.9 in (+/- 0.1 in)) distance from the vertical edge and 200.5 mm (+/- 2 mm) (7.9 in (+/- 0.1 in)) from the horizontal edge. Place the left rear door 200.5 mm (7.9 in) within a 2 mm (0.1 in) tolerance from the panel's horizontal edge and 47.5 mm (1.9 in) within a 2 mm (0.1 in) tolerance from its vertical edge. Warming the body panel to 66°F (19°C) or higher requires use of the J 25070 heat gun. For better adhesion apply 3M(R) Super Automotive Attachment Tape as double-coated acrylic foam tape to the emblem/nameplate but keep your hands off the tape and prevent it from touching any dirt sources. After removing adhesive tape backing, position the emblem/nameplate against masking tape or magnetic strip before firmly pressing it for thirty seconds to achieve strong adhesion. Finally you must remove both the masking tape and magnetic strip from the right rear door.

How to replace the front side door emblem/nameplate on Chevrolet Express 3500?

Begin repainting by taping off the emblem/nameplate area then heat the emblem/nameplate using a heat gun from 152 mm (6.0 in). Use a heat gun (J 25070) set 152 mm (6.0 inches) above the surface to heat the emblem/nameplate by moving in circular motions for thirty seconds. The emblem/nameplate removal requires using a plastic flat tool to protect the paint surface. Heating the emblem/nameplate front and back with the heat gun (J 25070) at a distance of 6 inches from the surface for 30 seconds. Next, use 3M(TM) Scotch Brite Molding Adhesive Remover Disk (3M(TM) P/N 07501) or its equivalent to clean the panel surface and back of the emblem/nameplate. Finish by wiping down the door panel with varnish makers and painters (VMP) naptha. When no marking exists on the emblem/nameplate location apply guide tape. Use the heat gun (J 25070) to warm the door surface until it reaches a minimum 21°C (70°F) but avoid touching the emblem/nameplate's adhesive backing. After removing the backing from the front section of the emblem you should install it onto the door panel before finishing the backing removal. To achieve proper adhesion users should hand roll the emblem/nameplate before checking for bonding while they finish by taking tape off the zone surrounding the door emblem.

OEM Chevrolet Express 3500 Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

18 Emblems found

View related parts
Chevrolet Express 3500 Nameplate, Rear Part Number: 23406612
$6.05 MSRP: $9.00
You Save: $2.95 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, End Gate And Rear Door Decoration; Plate, End Gate And Rear Door Decoration
- Position: Rear
- Replaces: 15162868
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2019 Chevrolet Express 3500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
Chevrolet Express 3500 Emblem, Front Part Number: 22744069
$88.57 MSRP: $131.83
You Save: $43.26 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Replaces: 25727580
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2024 Chevrolet Express 3500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
Chevrolet Express 3500 Nameplate, Rear Part Number: 20908152
$68.71 MSRP: $102.27
You Save: $33.56 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, End Gate And Rear Door Decoration
- Position: Rear
- Replaces: 25751080
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2024 Chevrolet Express 3500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
Chevrolet Express 3500 Nameplate, Rear Part Number: 15126056
$60.07 MSRP: $89.40
You Save: $29.33 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, End Gate And Rear Door Decoration; Emblem, Radiator Grille And Front End Ornamentation
- Position: Rear
- Replaces: 15034749, 15053248, 15675118, 15982992, 15998983
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2006 Chevrolet Express 3500 | Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Express 3500 Nameplate, Rear Part Number: 84682637
$51.41 MSRP: $76.52
You Save: $25.11 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Rear End Panel And Tailgate; Plate Assembly, Emblem, Front and Rear Side Door, Hood Panel Ornamentation, Front Fender Name
- Position: Rear
- Replaces: 15767139, 22884136
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2022 Chevrolet Express 3500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 8 Cyl 6.6 L DIESEL
View related parts
Chevrolet Express 3500 Nameplate, Green Part Number: 84674417
$24.00 MSRP: $35.72
You Save: $11.72 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem Assembly-Lift Gate *Green; Emblem, End Gate And Rear Door Decoration; Plate, End Gate And Rear Door Decoration; Emblem,Rear End Panel And Tailgate
- Replaces: 15910899, 20903626, 20903652, 15910900
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2011 Chevrolet Express 3500 | Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
Chevrolet Express 3500 Nameplate Part Number: 84674406
$42.15 MSRP: $60.31
You Save: $18.16 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate Assembly-End Gate Divider Name *Chrome; Emblem, End Gate And Rear Door Decoration; Plate, End Gate And Rear Door Decoration
- Replaces: 22884137, 15195869, 15029627
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2002 Chevrolet Express 3500 | Base, LS | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Express 3500 Nameplate, Front Part Number: 15551234
Product Specifications
- Other Name: Plate, Front Side Door; Plate Assembly, Cab & Load Carrier Outer Decoration; Side Panel Wheel Opening; Outside Decoration
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 Chevrolet Express 3500 | Base, LS | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Express 3500 Emblem Part Number: 12542999
$127.78 MSRP: $191.04
You Save: $63.26 (34%)
Product Specifications
- Other Name: Emblem Kit, Radiator Grille
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 Chevrolet Express 3500 | Base, LS | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Express 3500 Nameplate, Rear Part Number: 25751074
Product Specifications
- Other Name: Plate, End Gate And Rear Door Decoration
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2010 Chevrolet Express 3500 | Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
Chevrolet Express 3500 Nameplate Part Number: 22574521
Product Specifications
- Other Name: Emblem, Bumper/Fascia; Plate, Cab And Load Carrier Decoration; End Gate And Rear Door Decoration; Emblem, Hood Ornament; Front Fender Name
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2007 Chevrolet Express 3500 | Base, LS, LT | 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
Chevrolet Express 3500 Nameplate, Outer Part Number: 15995666
Product Specifications
- Other Name: Plate, Cab And Load Carrier Outer Side Decoration; Plate, Fuel Door & Body Side
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 Chevrolet Express 3500 | Base, LS | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Express 3500 Nameplate Part Number: 15995665
Product Specifications
- Other Name: Plate, Fuel Door & Body Side; Plate, Cab And Load Carrier Outer Side Decoration
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 Chevrolet Express 3500 | Base, LS | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Express 3500 Emblem, Outer Part Number: 15995664
Product Specifications
- Other Name: Plate, Cab And Load Carrier Outer Side Decoration; Nameplate; Plate Assembly, Front Side Door; Plate, Fuel Door & Body Side
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 Chevrolet Express 3500 | Base, LS | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Express 3500 Nameplate, Front Part Number: 15551230
Product Specifications
- Other Name: Plate, Front Side Door; Plate Assembly, Cab & Load Carrier Decoration; Side Panel Wheel Opening; Pickup Box Side Lower
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 Chevrolet Express 3500 | Base, LS | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Express 3500 Nameplate, Outer Part Number: 15249939
Product Specifications
- Other Name: Plate, Cab And Load Carrier Outer Side Decoration; Plate Assembly, Cab And Load Carrier Outer Side Decoration
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chevrolet Express 3500 | Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
Chevrolet Express 3500 Nameplate, Front Part Number: 15114049
Product Specifications
- Other Name: Plate, Front Side Door; Plate Assembly, Cab & Load Carrier Decoration; Side Panel Wheel Opening; Pickup Box Side
- Position: Front
- Replaces: 15551238
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 Chevrolet Express 3500 | Base, LS | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Express 3500 Nameplate, Outer Part Number: 15126053
$57.99 MSRP: $86.32
You Save: $28.33 (33%)
Product Specifications
- Other Name: Plate, Cab And Load Carrier Outer Side Decoration; Plate Assembly, Cab And Load Carrier Outer Side Decoration
- Position: Outer
- Replaces: 15182305, 15707436
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2007 Chevrolet Express 3500 | Base, LS, LT | 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL

Chevrolet Express 3500 Emblem

Want to cut long-term maintenance and repair costs? Choose OEM Emblem. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Express 3500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Express 3500 Emblem includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Express 3500 Emblem Parts and Q&A

Nameplate, Rear
23406612
Q: How to replace the rear door emblem/nameplate on Chevrolet Express 3500?
A:
Begin by heating the emblem/nameplate using a J 25070 heat gun while keeping the device 152 mm (6 inches) from the surface then move the gun in circular motions for about 30 seconds. A flat-bladed plastic tool should be used to carefully remove the emblem/nameplate from the panel while a 3M(R) P/N 07501 or equivalent substance should be used to remove all adhesive from both body panel and emblem/nameplate back. Wash the damaged panel before drying it with a clean lint-free material. The panel requires cleaning with a 50/50 mixture of isopropyl alcohol and water and a clean lint-free cloth to eliminate existing adhesive residue. This process should be followed by using 3M(R) General Purpose Adhesive Cleaner 08984 or an equivalent to remove all traces of adhesive. Prior to placement mark the installation spot using masking tape or a magnetic strip while keeping both rear doors safely bolted in position. Position the emblem/nameplate for the right rear door at 47.5 mm (+/- 2 mm) (1.9 in (+/- 0.1 in)) distance from the vertical edge and 200.5 mm (+/- 2 mm) (7.9 in (+/- 0.1 in)) from the horizontal edge. Place the left rear door 200.5 mm (7.9 in) within a 2 mm (0.1 in) tolerance from the panel's horizontal edge and 47.5 mm (1.9 in) within a 2 mm (0.1 in) tolerance from its vertical edge. Warming the body panel to 66°F (19°C) or higher requires use of the J 25070 heat gun. For better adhesion apply 3M(R) Super Automotive Attachment Tape as double-coated acrylic foam tape to the emblem/nameplate but keep your hands off the tape and prevent it from touching any dirt sources. After removing adhesive tape backing, position the emblem/nameplate against masking tape or magnetic strip before firmly pressing it for thirty seconds to achieve strong adhesion. Finally you must remove both the masking tape and magnetic strip from the right rear door.
Emblem, Front
22744069
Q: How to replace the front side door emblem/nameplate on Chevrolet Express 3500?
A:
Begin repainting by taping off the emblem/nameplate area then heat the emblem/nameplate using a heat gun from 152 mm (6.0 in). Use a heat gun (J 25070) set 152 mm (6.0 inches) above the surface to heat the emblem/nameplate by moving in circular motions for thirty seconds. The emblem/nameplate removal requires using a plastic flat tool to protect the paint surface. Heating the emblem/nameplate front and back with the heat gun (J 25070) at a distance of 6 inches from the surface for 30 seconds. Next, use 3M(TM) Scotch Brite Molding Adhesive Remover Disk (3M(TM) P/N 07501) or its equivalent to clean the panel surface and back of the emblem/nameplate. Finish by wiping down the door panel with varnish makers and painters (VMP) naptha. When no marking exists on the emblem/nameplate location apply guide tape. Use the heat gun (J 25070) to warm the door surface until it reaches a minimum 21°C (70°F) but avoid touching the emblem/nameplate's adhesive backing. After removing the backing from the front section of the emblem you should install it onto the door panel before finishing the backing removal. To achieve proper adhesion users should hand roll the emblem/nameplate before checking for bonding while they finish by taking tape off the zone surrounding the door emblem.