What procedures may necessitate centering the steering angle sensor on Chevrolet Equinox?

The Steering Angle Sensor needs centering only infrequently yet requires centering after specific maintenance procedures including steering gear changes, steering column replacements, Steering Angle Sensor replacement, intermediate shaft updates, abs controller maintenance or physical impacts to the vehicle. The centering operation needs the front wheels lined forward through wheel steering followed by park transmission selection. The installation of the scan tool serves as the next fundamental procedure. Tool required: scan tool. Place the scan tool onto the data link connector (DLC) then activate the on switch while keeping the engine off. The automated centering procedure can be accessed via select vehicle control systems/module setup/ebcm/steering pos. Sensor calibration on the scan tool interface. The procedure requires users to input three Steering Wheel positions - left 5 degrees, right 5 degrees, followed by straight ahead. Run the diagnostic system check to verify the absence of any active dtcs and then remove all previously detected dtcs. The Steering Angle Sensor centering task has been finalized.

OEM Chevrolet Equinox Steering Angle Sensor

Steering Column Angle Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Steering Angle Sensors found

View related parts
Chevrolet Equinox Angle Sensor Part Number: 25849366
$49.84 MSRP: $96.72
You Save: $46.88 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Steering Gear Hydraulic Valve; Steering Wheel Speed Sensor; Steering Angle Sensor; Steering Sensor Assembly
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2012 Chevrolet Equinox | LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Chevrolet Equinox Position Sensor Part Number: 13589991
$41.83 MSRP: $116.38
You Save: $74.55 (65%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Steering Gear Hydraulic Valve; Steering Wheel Speed Sensor; Steering Angle Sensor; Angle Sensor; Steering Sensor Assembly
- Replaces: 13579709, 13589257, 13584209, 13513905
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2017 Chevrolet Equinox | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox Angle Sensor Part Number: 15863534
$130.93 MSRP: $234.85
You Save: $103.92 (45%)
Product Specifications
- Other Name: Sensor, Steering Gear Hydraulic Valve; Steering Wheel Speed Sensor; Steering Angle Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2009 Chevrolet Equinox | Sport | 6 Cyl 3.6 L GAS

Chevrolet Equinox Steering Angle Sensor

Want to cut long-term maintenance and repair costs? Choose OEM Steering Angle Sensor. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Equinox parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Equinox Steering Angle Sensor includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Equinox Steering Angle Sensor is a wholly advanced part that contributes a lot in increasing the reliability and performance of the vehicle. It offers momentaneous information on the position of the steering wheel, a parameter vital for the work of the ESC and ensures its effectiveness, especially in cases of various road conditions. It is used with various models of Chevrolet Equinox across the three generations of the car and also interfaces with other systems like yaw and ABS wheel speed sensors to enhance the braking to avoid any instances where control of the car can easily be lost. The high-tech electronics of the Equinox also use this sensor to manage the steering assistance in relationship with speed and turn input for a more dynamic and fun driving experience. First of all, it is vital to list that the Chevrolet Equinox Steering Angle Sensor is famous in the automotive market amid the introduction ofbuild-newtechnology that contributes to the vehicles' comfort and performance. This sensor adds assist during those break, fast steering actions are enhanced meaning that the Equinox delivers smooth driving dynamics to the car's users hence considerate and safe to drive. Being one of the bestselling cars in the United States with over 2 million of units sold, Chevrolet Equinox being equipped with its unique Steering Angle Sensor demonstrates the company's aim at quality and innovative engineering.

Chevrolet Equinox Steering Angle Sensor Parts and Q&A

Angle Sensor
15863534
Q: What procedures may necessitate centering the steering angle sensor on Chevrolet Equinox?
A:
The Steering Angle Sensor needs centering only infrequently yet requires centering after specific maintenance procedures including steering gear changes, steering column replacements, Steering Angle Sensor replacement, intermediate shaft updates, abs controller maintenance or physical impacts to the vehicle. The centering operation needs the front wheels lined forward through wheel steering followed by park transmission selection. The installation of the scan tool serves as the next fundamental procedure. Tool required: scan tool. Place the scan tool onto the data link connector (DLC) then activate the on switch while keeping the engine off. The automated centering procedure can be accessed via select vehicle control systems/module setup/ebcm/steering pos. Sensor calibration on the scan tool interface. The procedure requires users to input three Steering Wheel positions - left 5 degrees, right 5 degrees, followed by straight ahead. Run the diagnostic system check to verify the absence of any active dtcs and then remove all previously detected dtcs. The Steering Angle Sensor centering task has been finalized.