How to service and repair the Engine Mount, Motor and Transmission Mount on Chevrolet Equinox?

Start your engine and transmission mount servicing and repair work by lifting and placing a vehicle support underneath. Set two floor jacks on wood blocks that should rest beneath both the powertrain engine and transmission to provide support. Begin at the engine compartment to loosen bolts uniting the transmission mount to the transmission before proceeding with the engine mount to intermediate bracket bolts. The service begins with through-bolt loosening for the front and rear transmission mount without removing them before proceeding to loosen the rear mount cradle bolts. Adjust the placement of floor jacks until the mount and its bracket maintain a 1/8 inch alignment while both align with the front clevis of the cradle. Tighten the transmission mount to transmission bolts starting with the rear bolt then the middle bolt and finally the front bolt until they reach the specification of 50 N.m (37 lb ft). The engine mount to intermediate bracket bolts should be tightened with a starting sequence on the center bolt and final torque setting at 50 N.m (37 lb ft). Reposition the rear transmission mount bracket to rest on transmission housing and then position the rear transmission mount at the center of the back cradle clevis before tightening the rear transmission mount to cradle bolts to 50 N.m (37 lb ft). You should shake the powertrain front to rear after taking out the floor jacks before permitting it to stabilize. The next step requires fastening the rear transmission mount through bolt to 110 N.m (81 lb ft) and following with the front transmission mount through bolt to achieve the same torque value. Finally, lower the vehicle.

How to replace the front engine mount on Chevrolet Equinox?

The first step to replace an engine front mount requires lifting the vehicle before providing support. Start by positioning a jack-stand and wooden block under the Oil Pan and then remove three components including the transmission mount bolt as well as transmission mount-to-transmission bolts until the transmission mount can be removed from the vehicle. You should start with installing the transmission mount-to-transmission bolts at 50 n.m (37 lb ft torques. After you install the transmission mount bolt you need to apply torque of 110 N.m (81 lb ft). Finish installing the vehicle by removing the jack-stand along with the block of wood positioned underneath the Oil Pan then slowly lower the vehicle.

OEM Chevrolet Equinox Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

31 Engine Mounts found

View related parts
Chevrolet Equinox Motor Mount Part Number: 22774206
$84.38 MSRP: $147.25
You Save: $62.87 (43%)
ADD TO CART
Product Specifications
- Other Name: Mount; Engine Mount Bracket
- Replaces: 20840184
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2017 Chevrolet Equinox | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Equinox Motor Mount Part Number: 22774205
$91.22 MSRP: $159.17
You Save: $67.95 (43%)
ADD TO CART
Product Specifications
- Other Name: Mount; Engine Mount Bracket
- Replaces: 20831436, 25786206, 20839836
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2017 Chevrolet Equinox | LT, LTZ, Premier | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox Transmission Mount Part Number: 20839833
$180.34 MSRP: $314.70
You Save: $134.36 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Transmission Mounting; Automatic Transmission Mount; Transfer Case Mount; Front Trans Mount
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2017 Chevrolet Equinox | LT, LTZ, Premier | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox Mount Insulator Part Number: 15292987
$24.95 MSRP: $27.92
You Save: $2.97 (11%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2009 Chevrolet Equinox | Sport | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox Motor Mount Part Number: 84884383
$75.76 MSRP: $132.22
You Save: $56.46 (43%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Engine Mounting; Engine Mount Bracket; Side Mount
- Replaces: 84322223
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 Chevrolet Equinox | L, LS, LT, Premier, RS | 4 Cyl 1.5 L GAS
View related parts
Chevrolet Equinox Rear Mount Bracket Part Number: 15822575
$109.44 MSRP: $289.81
You Save: $180.37 (63%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Mount; Motor Mount
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2009 Chevrolet Equinox | Sport | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox Mount Bracket Part Number: 22692548
$114.83 MSRP: $201.44
You Save: $86.61 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2009 Chevrolet Equinox | LS, LT, LTZ | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Equinox Strut, Transmission Mounting Part Number: 86804556
$42.90 MSRP: $74.87
You Save: $31.97 (43%)
ADD TO CART
Product Specifications
- Replaces: 84146942
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 Chevrolet Equinox | L, LS, LT, Premier, RS | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L DIESEL
View related parts
Chevrolet Equinox Motor Mount Part Number: 84884384
$91.67 MSRP: $159.96
You Save: $68.29 (43%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Engine Mounting; Engine Mount Bracket; Side Mount
- Replaces: 84229155, 84322225
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2020 Chevrolet Equinox | LT, Premier | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Equinox Transmission Mount Part Number: 20840181
$92.96 MSRP: $162.22
You Save: $69.26 (43%)
ADD TO CART
Product Specifications
- Other Name: Mount, Transmission Mounting; Automatic Transmission Mount; Transfer Case Mount; Front Trans Mount
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2017 Chevrolet Equinox | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Equinox Bracket, Transmission Mounting Support Part Number: 26335835
$30.30 MSRP: $49.90
You Save: $19.60 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: BRACKET ASM-TRANS MT STRUT
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2025 Chevrolet Equinox | ACTIV, LT, RS | 4 Cyl 1.5 L GAS
View related parts
Chevrolet Equinox Strut, Transmission Mounting Part Number: 26414770
$47.07 MSRP: $77.54
You Save: $30.47 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: STRUT-TRANS MT
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2025 Chevrolet Equinox | ACTIV, LT, RS | 4 Cyl 1.5 L GAS
View related parts
Chevrolet Equinox Mount, Transmission Mounting Part Number: 26504923
$79.05 MSRP: $130.23
You Save: $51.18 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: MOUNT-TRANS
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2025 Chevrolet Equinox | ACTIV, LT, RS | 4 Cyl 1.5 L GAS
View related parts
Chevrolet Equinox Mount, Engine Mounting Part Number: 26380647
$57.10 MSRP: $90.63
You Save: $33.53 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: MOUNT-ENG
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2025 Chevrolet Equinox | ACTIV, LT, RS | 4 Cyl 1.5 L GAS
View related parts
Chevrolet Equinox Mount Bracket Part Number: 85511549
$62.31 MSRP: $98.91
You Save: $36.60 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket-Engine Mount Engine Side; Bracket, Engine Mounting
- Replaces: 23463095, 84618128
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 Chevrolet Equinox | L, LS, LT, Premier, RS | 4 Cyl 1.5 L GAS
View related parts
Chevrolet Equinox Transmission Mount Part Number: 84823263
$67.33 MSRP: $106.89
You Save: $39.56 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Transmission Mounting; Engine Mount Bracket; Motor Mount; Lower Trans Mount; Strut
- Replaces: 84146943
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2025 Chevrolet Equinox | ACTIV, L, LS, LT, Premier, RS | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Chevrolet Equinox Motor Mount Part Number: 84884385
$91.86 MSRP: $145.84
You Save: $53.98 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Engine Mounting; Engine Mount Bracket
- Replaces: 84377289
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2025 Chevrolet Equinox | ACTIV, LT, RS | 4 Cyl 1.5 L GAS
View related parts
Chevrolet Equinox Mounting Bracket Part Number: 15854396
$81.92 MSRP: $128.33
You Save: $46.41 (37%)
Product Specifications
- Other Name: Adapter, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount
- Replaces: 22689529
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2017 Chevrolet Equinox | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Equinox Front Mount Part Number: 25979417
Product Specifications
- Other Name: Mount Assembly-Engine; Engine Mount Bracket; Motor Mount; Mount; Mount, Engine Mount Dampening
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2009 Chevrolet Equinox | Sport | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox Motor Mount Part Number: 84322224
$71.53 MSRP: $112.06
You Save: $40.53 (37%)
Product Specifications
- Other Name: Mount, Engine Mounting; Engine Mount Bracket; Side Mount
- Replaced by: 85634237
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019 Chevrolet Equinox | LT, Premier | 4 Cyl 1.6 L DIESEL

| Page 1 of 2 |Next >

1-20 of 31 Results

Chevrolet Equinox Engine Mount

Want to cut long-term maintenance and repair costs? Choose OEM Engine Mount. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Equinox parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Equinox Engine Mount includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Equinox Engine Mount Parts and Q&A

Rear Mount Bracket
15822575
Q: How to service and repair the Engine Mount, Motor and Transmission Mount on Chevrolet Equinox?
A:
Start your engine and transmission mount servicing and repair work by lifting and placing a vehicle support underneath. Set two floor jacks on wood blocks that should rest beneath both the powertrain engine and transmission to provide support. Begin at the engine compartment to loosen bolts uniting the transmission mount to the transmission before proceeding with the engine mount to intermediate bracket bolts. The service begins with through-bolt loosening for the front and rear transmission mount without removing them before proceeding to loosen the rear mount cradle bolts. Adjust the placement of floor jacks until the mount and its bracket maintain a 1/8 inch alignment while both align with the front clevis of the cradle. Tighten the transmission mount to transmission bolts starting with the rear bolt then the middle bolt and finally the front bolt until they reach the specification of 50 N.m (37 lb ft). The engine mount to intermediate bracket bolts should be tightened with a starting sequence on the center bolt and final torque setting at 50 N.m (37 lb ft). Reposition the rear transmission mount bracket to rest on transmission housing and then position the rear transmission mount at the center of the back cradle clevis before tightening the rear transmission mount to cradle bolts to 50 N.m (37 lb ft). You should shake the powertrain front to rear after taking out the floor jacks before permitting it to stabilize. The next step requires fastening the rear transmission mount through bolt to 110 N.m (81 lb ft) and following with the front transmission mount through bolt to achieve the same torque value. Finally, lower the vehicle.
Mount Bracket
22692548
Q: How to replace the front engine mount on Chevrolet Equinox?
A:
The first step to replace an engine front mount requires lifting the vehicle before providing support. Start by positioning a jack-stand and wooden block under the Oil Pan and then remove three components including the transmission mount bolt as well as transmission mount-to-transmission bolts until the transmission mount can be removed from the vehicle. You should start with installing the transmission mount-to-transmission bolts at 50 n.m (37 lb ft torques. After you install the transmission mount bolt you need to apply torque of 110 N.m (81 lb ft). Finish installing the vehicle by removing the jack-stand along with the block of wood positioned underneath the Oil Pan then slowly lower the vehicle.