How to replace the emblem/nameplate on the liftgate on Chevrolet Equinox?

Before installing the new liftgate emblem/nameplate you need to protect the surface it will go on with tape and make alignment marks. Warm the emblem/nameplate for 30 seconds with a heat gun while moving the gun in a circle at 152 mm (6 inches) distance from the surface. Use plain plastic and flat-tipped tools to gently take off the emblem/nameplate from the panel surface. Apply 3m(TM) P/N 07501 adhesive scotch brite disk for body panels or a lint-free cloth with vmp naphtha and water mixture or isopropyl alcohol solution to clean plastic panels. Dry the cleaned installation space with the same solution. Place tape on the surface to show the emblem/nameplate installation spot when no surface marker exists. Place the equinox nameplate 0.043 (11 mm) beyond the liftgate left edge and 6.3 (160 mm) down from the center line. Align the chevrolet nameplate at the right edge 1.22 inches away and place it 6.30 inches below the middle vertical line. Apply gentle heat to the installation area until it reaches 27-41°C (80-105°F) and verify your nameplate's surface at 29-32°C (85-90°F). Do not touch its adhesive strip during this process. Place the emblem/nameplate over the marks then stick it correctly onto the surface by using firm pressure without pushing against one side. Take off the protective tape from the surface where you placed the emblem.

How to properly install an emblem on a Chevrolet Equinox?

Starting with tape protection for the mounting surface you can move to create installation alignment marks for the equinox liftgate emblem/nameplate replacement. Heat the emblem/nameplate under a heat gun in a circular pattern for 30 seconds from a distance of 152 mm (6 in) away from the surface. Disassemble the emblem/nameplate from the panel using a flat blade plastic tool. Categoria 3M(TM) Scotch Brite molding adhesive remover disk 3M(TM) P/N 07501 serves to remove body panel adhesive but body panels require either varnish makers and painters (VMP) naphtha or a 50/50 mixture of isopropyl alcohol and water when used on plastic panels. Wipe down both the installation area with the same cleaning solution before completely drying it out. Apply tape first to mark the installation spot when the surface does not have any markings. The equinox emblem/nameplate needs to be positioned at 11 mm (0.043 in) from the left liftgate edge and 160 mm (6.30 in) from the liftgate center to bottom. Position the chevrolet emblem/nameplate 31 mm (1.22 in) from the right edge while keeping it 160 mm (6.30 in) from the center to the bottom. Heat the surface to between 27-41°C (80-105°F) before placing the emblem/nameplate at temperatures between 29-32°C (85-90°F) without touching the adhesive side. First remove the protective liner from the emblem/nameplate before placing it accurately on the marks using steady and equal pressure. Remove the protective tape which covers the mounting surface.

OEM Chevrolet Equinox Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

48 Emblems found

View related parts
Chevrolet Equinox Emblem, Lower Part Number: 22760644
$37.27 MSRP: $55.48
You Save: $18.21 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem Assembly-Lift Gate Lower; Emblem,Rear End Panel And Tailgate
- Position: Lower
- Replaces: 25795261
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2015 Chevrolet Equinox | L, LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox Emblem, Gold, Front Part Number: 23387537
$52.61 MSRP: $78.30
You Save: $25.69 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem Assembly-Front Bumper Fascia; Emblem, Bumper/Fascia
- Position: Front
- Replaces: 23456057
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2017 Chevrolet Equinox | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox Emblem, Front Part Number: 22760645
$73.44 MSRP: $109.31
You Save: $35.87 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem Assembly-Front Bumper Fascia; Emblem, Bumper/Fascia
- Position: Front
- Replaces: 25795267
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2015 Chevrolet Equinox | L, LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox Nameplate Part Number: 84310387
$25.86 MSRP: $40.47
You Save: $14.61 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate Assembly-Lift Gate Transmission Name *Exterior Brim
- Replaces: 15239124, 23463274, 84996815, 84176772
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2024 Chevrolet Equinox | L, LS, LT, LTZ, Premier, RS, Sport | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L DIESEL, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox Nameplate Part Number: 23255003
$27.69 MSRP: $43.34
You Save: $15.65 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate Assembly-Lift Gate Vehicle & Trim Level Name *Chrome
- Replaces: 05482100, 22878313, 25795263, 25866035, 5482100
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2017 Chevrolet Equinox | LT | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox Plate, Front Side Door Part Number: 26344500
$43.42 MSRP: $67.96
You Save: $24.54 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: PLATE ASM-FRT S/D VEH NA *EXTERIOR BRIM
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2025 Chevrolet Equinox | ACTIV, LT, RS | 4 Cyl 1.5 L GAS
View related parts
Chevrolet Equinox Plate Assembly-Lift Gate Trim Level Name *Exterior Brim Part Number: 26422180
$5.54 MSRP: $8.25
You Save: $2.71 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: PLATE ASM-L/GATE TR LVL NA *EXTERIOR BRIM
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2025 Chevrolet Equinox | LT | 4 Cyl 1.5 L GAS
View related parts
Chevrolet Equinox Plate, Exterior Door Part Number: 26422177
$7.91 MSRP: $11.77
You Save: $3.86 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: PLATE ASM-L/GATE TRANS NA *BLACK
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2025 Chevrolet Equinox | ACTIV, LT, RS | 4 Cyl 1.5 L GAS
View related parts
Chevrolet Equinox Plate Assembly-Lift Gate Transmission Name *Exterior Brim Part Number: 26422176
$8.38 MSRP: $12.47
You Save: $4.09 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: PLATE ASM-L/GATE TRANS NA *EXTERIOR BRIM
- Replaced by: 26591630
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2025 Chevrolet Equinox | ACTIV, LT, RS | 4 Cyl 1.5 L GAS
View related parts
Chevrolet Equinox Emblem Part Number: 84689784
$11.72 MSRP: $17.44
You Save: $5.72 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Front Side Door
- Replaces: 15223483, 15223484
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2009 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox Emblem, Gold, Rear Part Number: 23389809
$19.01 MSRP: $28.29
You Save: $9.28 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Rear End Panel And Tailgate; Emblem,Rear End Panel And Tailgate
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2017 Chevrolet Equinox | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox Nameplate, Green Part Number: 84674417
$24.61 MSRP: $36.62
You Save: $12.01 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem Assembly-Lift Gate *Green
- Replaces: 15910900, 15910899, 20903652, 20903626
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2012 Chevrolet Equinox | LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Chevrolet Equinox Nameplate, Front Part Number: 84243242
$25.41 MSRP: $37.82
You Save: $12.41 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem Assembly-Front Grille
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2022-2024 Chevrolet Equinox | RS | 4 Cyl 1.5 L GAS
View related parts
Chevrolet Equinox Nameplate, Rear Part Number: 25795262
$25.55 MSRP: $38.02
You Save: $12.47 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Rear End Panel And Tailgate; Emblem,Rear End Panel And Tailgate
- Position: Rear
- Replaces: 5482099, 25866034, 05482099
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2017 Chevrolet Equinox | LS | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Equinox Emblem Assembly-Front Grille Part Number: 26569534
$26.08 MSRP: $38.82
You Save: $12.74 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: EMBLEM ASM-FRT GRL
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2025 Chevrolet Equinox | ACTIV, LT, RS | 4 Cyl 1.5 L GAS
View related parts
Chevrolet Equinox Emblem Assembly-Front Grille Part Number: 26569533
$29.34 MSRP: $43.68
You Save: $14.34 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: EMBLEM ASM-FRT GRL
- Position: Front
- Replaces: 26381486
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2025 Chevrolet Equinox | LT | 4 Cyl 1.5 L GAS
View related parts
Chevrolet Equinox Nameplate Part Number: 84515648
$30.49 MSRP: $45.38
You Save: $14.89 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate Assembly-Lift Gate Trim Level Name *Chrome; Plate,Rear End Panel And Tailgate
- Replaces: 84005310, 84359155
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2022-2024 Chevrolet Equinox | RS | 4 Cyl 1.5 L GAS
View related parts
Chevrolet Equinox Emblem, Front Part Number: 15252284
$47.11 MSRP: $70.11
You Save: $23.00 (33%)
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2009 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox Nameplate, Lower Part Number: 25866033
$27.43 MSRP: $40.82
You Save: $13.39 (33%)
Product Specifications
- Other Name: Emblem Assembly-Lift Gate Lower *Chrome
- Position: Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2016 Chevrolet Equinox | LTZ | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox Emblem, Black; Gold Part Number: 5481694
Product Specifications
- Other Name: Emblem-Radiator Grille (Gold Bow-Tie W/O Black Outline)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005 Chevrolet Equinox | LS, LT | 6 Cyl 3.4 L GAS

| Page 1 of 3 |Next >

1-20 of 48 Results

Chevrolet Equinox Emblem

Want to cut long-term maintenance and repair costs? Choose OEM Emblem. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Equinox parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Equinox Emblem includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Equinox Emblem Parts and Q&A

Nameplate, Rear
25795262
Q: How to replace the emblem/nameplate on the liftgate on Chevrolet Equinox?
A:
Before installing the new liftgate emblem/nameplate you need to protect the surface it will go on with tape and make alignment marks. Warm the emblem/nameplate for 30 seconds with a heat gun while moving the gun in a circle at 152 mm (6 inches) distance from the surface. Use plain plastic and flat-tipped tools to gently take off the emblem/nameplate from the panel surface. Apply 3m(TM) P/N 07501 adhesive scotch brite disk for body panels or a lint-free cloth with vmp naphtha and water mixture or isopropyl alcohol solution to clean plastic panels. Dry the cleaned installation space with the same solution. Place tape on the surface to show the emblem/nameplate installation spot when no surface marker exists. Place the equinox nameplate 0.043 (11 mm) beyond the liftgate left edge and 6.3 (160 mm) down from the center line. Align the chevrolet nameplate at the right edge 1.22 inches away and place it 6.30 inches below the middle vertical line. Apply gentle heat to the installation area until it reaches 27-41°C (80-105°F) and verify your nameplate's surface at 29-32°C (85-90°F). Do not touch its adhesive strip during this process. Place the emblem/nameplate over the marks then stick it correctly onto the surface by using firm pressure without pushing against one side. Take off the protective tape from the surface where you placed the emblem.
Emblem, Front
15252284
Q: How to properly install an emblem on a Chevrolet Equinox?
A:
Starting with tape protection for the mounting surface you can move to create installation alignment marks for the equinox liftgate emblem/nameplate replacement. Heat the emblem/nameplate under a heat gun in a circular pattern for 30 seconds from a distance of 152 mm (6 in) away from the surface. Disassemble the emblem/nameplate from the panel using a flat blade plastic tool. Categoria 3M(TM) Scotch Brite molding adhesive remover disk 3M(TM) P/N 07501 serves to remove body panel adhesive but body panels require either varnish makers and painters (VMP) naphtha or a 50/50 mixture of isopropyl alcohol and water when used on plastic panels. Wipe down both the installation area with the same cleaning solution before completely drying it out. Apply tape first to mark the installation spot when the surface does not have any markings. The equinox emblem/nameplate needs to be positioned at 11 mm (0.043 in) from the left liftgate edge and 160 mm (6.30 in) from the liftgate center to bottom. Position the chevrolet emblem/nameplate 31 mm (1.22 in) from the right edge while keeping it 160 mm (6.30 in) from the center to the bottom. Heat the surface to between 27-41°C (80-105°F) before placing the emblem/nameplate at temperatures between 29-32°C (85-90°F) without touching the adhesive side. First remove the protective liner from the emblem/nameplate before placing it accurately on the marks using steady and equal pressure. Remove the protective tape which covers the mounting surface.