Other Name: Lock, Rear Compartment Lid Or Tail Gate Latch; Trunk Latch; Door Lock; Latch; Latch, Rear Compartment Lid Or Tail Gate Latch; Latch, Rear Compartment Lid Release Or Ajar
Other Name: Latch Assembly-Front Side Door; Door Lock Actuator Motor; Door Latch Assembly; Door Lock Actuator; Door Lock; Latch Assembly; Lock; Latch; Latch, Front Side Door; Latch, Door Lock
Position: Front Driver Side
Replaced by: 13546477
Fits the following Chevrolet Models:
Colorado | 2023 | LT, Trail Boss, WT, Z71, ZR2 | 4 Cyl 2.7 L GAS
Other Name: Lock, Front Side Door; Door Lock; Lock; Lock, Door Lock
Position: Front Driver Side
Fits the following Chevrolet Models:
Blazer | 2004-2005 | Base, LS, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
S10 | 2004 | LS, ZR5 | 6 Cyl 4.3 L GAS
| Page 1 of 38 |Next >
1-20 of 742 Results
Chevrolet Door Lock Actuator
Choose OEM Door Lock Actuator, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Chevrolet's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Chevrolet Door Lock Actuator. You can shop at highly competitive prices and protect your budget. All our genuine Chevrolet parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.
Q: How to replace the power door lock actuator on Chevrolet S10?
A:
The power Door Lock Actuator replacement starts with removing the door trim panel and moving to the water deflector and then to the Door Latch Assembly. You need to remove two screws which keep the lock actuator fastened to the latch. After lifting and rotating the actuator away from the latch you can disconnect the rubber Bumper from the latch before removing the actuator from the latch. Start by putting the rubber Bumper on the latch followed by actuator rotation toward the latch to confirm complete rubber Bumper engagement. The successful installation requires first tooth alignment between the actuator gear and the latch gear. Firmly attach the actuator above the latch using two screws that should be tightened to 0.75 n.m (6 lb in) as per the provided fastener notice. The installation process requires users to return the latch to the door and then replace the water deflector followed by the door trim panel.
Q: How to Replace a Front Door Lock Actuator on Chevrolet Tahoe?
A:
You should start the procedure to replace the front door power lock actuator by elevating the window glass before removing the door trim panel and water deflector. The inside Door Lock rod and manual Door Lock rod should be separated both from the handle retainer clip and from the door retainer clips. The removal of the rubber plug allows for extracting the outside handle rod retainer before disconnecting the cylinder lock rod . The Door Lock Actuator gets removed from the door by disconnecting the retaining bolts while also taking out all control rods as a single assembly. The installation process begins with removing the electric connector from the Door Lock Actuator followed by control rods separation if equipment exists. Start by installing control rods to the assembly before connecting electrical connectors to the Door Lock Actuator when it has this feature. The installation process begins with mounting the Door Lock Actuator onto the door structure before connecting both outsourced door handle component and cylinder lock rod element. Secure the Door Lock Actuator using bolts which should be tightened to 9 n.m (80 lb in). The door retainer clips should connect with the manual Door Lock while the lock assembly should receive the inside door handle control rod and the inside Door Lock rod must attach to the handle retainer clip. Check the performance of all relevant components after installing water deflectors along with door trim panels.