How to replace the exhaust hanger for the exhaust muffler on Chevrolet Corvette?

The replacement process for the exhaust system insulator, hanger, bracket (Exhaust Muffler) starts with removing the Muffler, next moving to removing the hanger nuts and hanger assembly. You should begin the replacement by removing the hanger reinforcement together with the push-on retainer if they exist. You should start by installing the hanger reinforcement first before proceeding with the push-on retainer if needed. Start by reading the fastener notice in service precautions following which install the Muffler hanger along with the nuts until they reach 16 nm torque (12 ft. Lbs.). Finally, reinstall the Muffler.

How to service and repair the rear exhaust hanger, insulator, and bracket for the exhaust pipe on Chevrolet Corvette?

The repair and servicing of the exhaust system insulator and rear Exhaust Pipe hanger and bracket starts with removing the catalytic converters followed by the upper Exhaust Pipe hanger bolts and finishing with the Exhaust Pipe hanger. Install the Exhaust Pipe hanger before any installation process while following the fastener notice instructions. The installation of upper Exhaust Pipe hanger bolts should proceed next and these fasteners need to be tightened to 50 n.m (37 lb ft). Finally, reinstall the catalytic converters.

OEM Chevrolet Corvette Exhaust Hanger

Exhaust Tail Pipe Hanger

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Exhaust Hangers found

View related parts
Chevrolet Corvette Muffler & Pipe Insulator Part Number: 25918352
$36.76 MSRP: $55.46
You Save: $18.70 (34%)
ADD TO CART
Product Specifications
- Other Name: Insulator, Exhaust Muffler/Resonator; Exhaust Insulator; Exhaust Hanger; Rear Muffler Insulator; Insulator; Insulator, Exhaust Pipe
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Corvette | E-Ray, Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Muffler & Pipe Hanger Part Number: 23290442
$27.84 MSRP: $41.43
You Save: $13.59 (33%)
ADD TO CART
Product Specifications
- Other Name: Hanger, Exhaust Tail Pipe; Exhaust Hanger
- Position: Rear
- Replaces: 20968768
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Corvette | Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Muffler & Pipe Hanger, Rear Part Number: 22822466
$27.85 MSRP: $41.44
You Save: $13.59 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hanger Assembly-Exhaust Pipe Rear; Exhaust Hanger; Hanger, Exhaust Pipe
- Position: Rear
- Replaces: 10349562
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2013 Chevrolet Corvette | 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Corvette Insulator, Rear Part Number: 84240190
$46.95 MSRP: $69.87
You Save: $22.92 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator-Exhaust Rear Muffler; Exhaust Insulator; Exhaust Hanger
- Position: Rear
- Replaced by: 86820087
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2023 Chevrolet Corvette | Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Rear Hanger, Passenger Side Part Number: 84794550
$12.63 MSRP: $18.79
You Save: $6.16 (33%)
ADD TO CART
Product Specifications
- Other Name: Bracket, Exhaust Pipe; Exhaust Hanger
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Corvette | E-Ray, Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Insulator, Rear Part Number: 86820087
$46.95 MSRP: $69.87
You Save: $22.92 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator-Exhaust Rear Muffler; Insulator, Exhaust Muffler/Resonator; Insulator, Exhaust Pipe
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Corvette | E-Ray, Stingray, Z06 | 6.2L V8, 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Rear Hanger, Driver Side Part Number: 84794549
$12.63 MSRP: $18.79
You Save: $6.16 (33%)
ADD TO CART
Product Specifications
- Other Name: Bracket, Exhaust Pipe; Exhaust Hanger
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Corvette | E-Ray, Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Intermed Pipe Hanger, Rear Part Number: 20968767
$19.58 MSRP: $29.92
You Save: $10.34 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hanger Assembly-Exhaust Pipe Rear; Exhaust Hanger; Hanger, Exhaust Muffler/Resonator; Hanger, Exhaust Pipe
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Corvette | Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Intermed Pipe Hanger, Rear Part Number: 20968766
$18.52 MSRP: $28.32
You Save: $9.80 (35%)
ADD TO CART
Product Specifications
- Other Name: Hanger Assembly-Exhaust Pipe Rear; Exhaust Hanger; Hanger, Exhaust Muffler/Resonator; Hanger, Exhaust Pipe
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Corvette | Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Front Hanger, Driver Side Part Number: 12690919
$6.26 MSRP: $9.32
You Save: $3.06 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hanger Assembly-Exhaust Front; Exhaust Hanger; Hanger, Exhaust Pipe
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Corvette | E-Ray, Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Front Hanger, Passenger Side Part Number: 12690918
$6.91 MSRP: $10.28
You Save: $3.37 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hanger Assembly-Exhaust Front; Exhaust Hanger; Hanger, Exhaust Pipe
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Corvette | E-Ray, Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Intermed Pipe Hanger, Rear Part Number: 15784474
$40.79 MSRP: $60.69
You Save: $19.90 (33%)
Product Specifications
- Other Name: Hanger Assembly-Exhaust Pipe Rear; Exhaust Hanger; Hanger, Exhaust Pipe
- Position: Rear
- Replaces: 10350597
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2013 Chevrolet Corvette | 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Corvette Intermed Pipe Hanger, Rear Part Number: 15784473
$40.79 MSRP: $60.69
You Save: $19.90 (33%)
Product Specifications
- Other Name: Hanger Assembly-Exhaust Pipe Rear; Exhaust Hanger; Hanger, Exhaust Pipe
- Position: Rear
- Replaces: 10273796, 10273797, 10350596
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2013 Chevrolet Corvette | 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS

Chevrolet Corvette Exhaust Hanger

Want to cut long-term maintenance and repair costs? Choose OEM Exhaust Hanger. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Corvette parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Corvette Exhaust Hanger includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

This Chevrolet Corvette Exhaust Hanger is an important part of the Chevrolet Corvette series that defines the dependability and output of cars in the segment. Intended as a component that holds the exhaust system on a car this Exhaust Hanger has the critical function of keeping exhaust parts away from the car body thus shielding the cabin from noise and vibrations resulting from the movement of the car. Made chiefly from elastic rubber, the Chevrolet Corvette Exhaust Hanger is built to endure the tests of time when used in high performance car racing. The compatibility with all the Corvette generations starting from C1 through to the current C8 is an indication of how crucial the computer is in ensuring efficiency and safety of the exhaust system. A good Exhaust Hanger not only optimizes the performance of the Chevrolet Corvette but also reduces unwanted problems like leakage of gases and loud noises which are associated with usage and timely deterioration. It is thus important for the Exhaust Hanger to be inspected and maintained at intervals since it is vital in the proper operation of the vehicle thus making the Chevrolet Corvette to still deliver the fun to drive feeling it is associated with. This product has some specialists options like enhanced materials and unique formats that distinguish the Chevrolet Corvette Exhaust Hanger in the automotive pan and provide it with high demands among lovers with the need to have a car which is both fast and long-enduring. Lastly, the Chevrolet Corvette Exhaust Hanger is a perfect example of a great feat of the company, which used all its efforts to make driving a Chevrolet Corvette both enjoyable and safe.

Chevrolet Corvette Exhaust Hanger Parts and Q&A

Intermed Pipe Hanger, Rear
15784473
Q: How to replace the exhaust hanger for the exhaust muffler on Chevrolet Corvette?
A:
The replacement process for the exhaust system insulator, hanger, bracket (Exhaust Muffler) starts with removing the Muffler, next moving to removing the hanger nuts and hanger assembly. You should begin the replacement by removing the hanger reinforcement together with the push-on retainer if they exist. You should start by installing the hanger reinforcement first before proceeding with the push-on retainer if needed. Start by reading the fastener notice in service precautions following which install the Muffler hanger along with the nuts until they reach 16 nm torque (12 ft. Lbs.). Finally, reinstall the Muffler.
Intermed Pipe Hanger, Rear
15784474
Q: How to service and repair the rear exhaust hanger, insulator, and bracket for the exhaust pipe on Chevrolet Corvette?
A:
The repair and servicing of the exhaust system insulator and rear Exhaust Pipe hanger and bracket starts with removing the catalytic converters followed by the upper Exhaust Pipe hanger bolts and finishing with the Exhaust Pipe hanger. Install the Exhaust Pipe hanger before any installation process while following the fastener notice instructions. The installation of upper Exhaust Pipe hanger bolts should proceed next and these fasteners need to be tightened to 50 n.m (37 lb ft). Finally, reinstall the catalytic converters.