How to replace the Front A/C Hose on Chevrolet Corvette?

You need to recover refrigerant before replacing the front tube of the air conditioning evaporator. First uninstall the battery while removing the a/c tube connector at the evaporator rear line assembly. Remove the two components from the front evaporator inlet line by disconnecting it from the body retaining clip and removing the refrigerant pressure sensor electrical connector. The vehicle should be elevated before removing the front evaporator inlet line to A/C Condenser lower bolt while using caps or tape to seal open a/c components from contamination. Free the front evaporator line inlet from the A/C Condenser using proper procedures then discard the sealing washer before taping or capping the open A/C Condenser. Lower the vehicle while you separate the front evaporator inlet line from its position on the evaporator rear line assembly then discard both o-rings before capping or taping the evaporator rear line assembly. Proceed by disconnecting surge tank outlet hose along with inlet heater hose from their connection to underhood junction box retainer clip and then remove the front evaporator inlet line from the vehicle. The installation process involves attaching the front evaporator inlet line to the vehicle and connecting both surge tank outlet hose and inlet heater hose with the underhood junction box retainer clip. The evaporator rear line assembly needs its cap or tape removed before new o-rings can be installed to this assembly. Attach the front evaporator inlet line to the evaporator rear line assembly after which you must elevate the vehicle before removing the cap or tape from the A/C Condenser. Use a new sealing washer to connect the front evaporator inlet line with the A/C Condenser while tightening the lower front evaporator inlet line to A/C Condenser bolt to 16 nm (12 lb ft). Lower the vehicle while joining the front evaporator inlet line to its body retention clip then hook up the refrigerant pressure sensor electrical connector. The procedure involves connecting the a/c tube connector to the evaporator rear line assembly followed by reinstallation of the battery and system evacuation and recharging. Additionally the leak testing of component fittings requires the j 39400-a - halogen leak detector.

How to replace the Rear A/C Hose on Chevrolet Corvette?

The first step to replace the rear evaporator tube requires recovering the refrigerant properly from the a/c system. The first step involves removing both battery and Intake Manifold components. Start by detaching the front evaporator inlet line through its body retaining clip and then disconnect the refrigerant pressure sensor electrical connector. Proceed with disconnecting the a/c tube connectors from the evaporator rear line assembly then unlinking the front evaporator inlet line from the evaporator rear line assembly yet ensure all open a/c components receive caps or tape for contamination prevention. The procedure requires removing both o-rings and sealing the front evaporator inlet line and disconnecting the a/c compressor line from the evaporator rear line assembly. Dispose of both o-rings before completing frontal and evaporator procedures. First cap or tape the front evaporator line along with the a/c compressor line before removing the retaining cowl stud nut and the thermal expansion valve (TXV) block fitting nut . Remove the rear evaporator line assembly from the vehicle while capping the front evaporator inlet line as well as the txv because you should discard the seal washers. To install the device users must remove protective tape or cap from the txv while applying specified pag oil on the evaporator rear line assembly in case of replacement. After adding new seal washers the evaporator rear line assembly needs installation in the vehicle while you connect it to the retainer bracket stud and the txv. The installation procedure involves screwing the txv block fitting nut using torque to 20 n.m (15 lb ft) followed by installing the heater pipe bracket retaining nut with the proper torque of 10 n.m (7 lb ft). First take away the caps or tape from the evaporator front line and a/c compressor line then install new o-rings to the rear evaporator line assembly and join these lines to each other. First connect the front evaporator line to the evaporator rear line assembly and then attach the a/c tube connectors to the same assembly and connect the refrigerant pressure sensor electrical connector. The service procedure ends by reattaching the front evaporator inlet line to the body retaining clip and reinstalling both the Intake Manifold and battery while the a/c system requires evacuation and recharging followed by a leak detection test on fittings with the halogen leak detector (J 39400-A).

OEM Chevrolet Corvette A/C Hose

Air Conditioning Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

51 A/C Hoses found

View related parts
Chevrolet Corvette Drain Tube Part Number: 22697948
$5.66 MSRP: $10.62
You Save: $4.96 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube, Air Conditioner Evaporator Core Housing
- Replaces: 10080332, 22644064
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Corvette | Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette A/C Hoses Part Number: 15250411
$116.56 MSRP: $218.90
You Save: $102.34 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Air Conditioner Compressor; A/C Refrigerant Liquid Hose; A/C Hose; Pressure Hose; Hose, A/C Compressor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Corvette | 427 Limited Edition Z06, Base, Z06 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Corvette Suction & Discharge Hose Assembly Part Number: 84398336
$120.70 MSRP: $226.67
You Save: $105.97 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Air Conditioner Compressor; A/C Refrigerant Liquid Hose; A/C Hose; Front Pressure Hose; Hose, A/C Compressor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019 Chevrolet Corvette | Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Suction & Discharge Hose Assembly Part Number: 23371935
$117.01 MSRP: $211.78
You Save: $94.77 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Air Conditioner Compressor; A/C Refrigerant Liquid Hose; A/C Hose; Front Pressure Hose; Hose, A/C Compressor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2018 Chevrolet Corvette | Grand Sport, Stingray, Z06 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette A/C Hoses Part Number: 19213199
$128.14 MSRP: $269.90
You Save: $141.76 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Air Conditioner Compressor; A/C Refrigerant Liquid Hose; A/C Hose; Pressure Hose; Hose, A/C Compressor
- Replaces: 10229469
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2004 Chevrolet Corvette | 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Liquid Line Part Number: 84398337
$57.05 MSRP: $107.16
You Save: $50.11 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly-A/C Condenser & A/C Evaporator; A/C Refrigerant Liquid Hose; A/C Hose; A/C Tube; Tube, A/C Refrigerant (All Metal)
- Replaces: 22961599, 23464027, 84200226
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Corvette | Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Evaporator Tube Part Number: 84834294
$79.44 MSRP: $149.18
You Save: $69.74 (47%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-A/C Condenser & Evaporator; A/C Refrigerant Liquid Hose; A/C Hose
- Replaced by: 85857562
- Replaces: 84678720
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2025 Chevrolet Corvette | E-Ray, Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Hose Assembly-A/C Compressor Part Number: 85717605
$216.97 MSRP: $407.46
You Save: $190.49 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: HOSE ASM-A/C CMPR
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2024-2025 Chevrolet Corvette | E-Ray | 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV)
View related parts
Chevrolet Corvette Hose, A/C Compressor Part Number: 86819879
$225.45 MSRP: $423.38
You Save: $197.93 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-A/C Compressor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2024-2025 Chevrolet Corvette | E-Ray | 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV)
View related parts
Chevrolet Corvette Tube-A/C Evaporator Case Drain Part Number: 85543707
$18.38 MSRP: $33.26
You Save: $14.88 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: TUBE-A/C EVPR CASE DRN
- Replaces: 84228874, 84893141
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2025 Chevrolet Corvette | E-Ray, Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Drain Tube Part Number: 84893141
$18.38 MSRP: $33.26
You Save: $14.88 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube-A/C Evaporator Case Drain; Tube, A/C Evaporator
- Replaced by: 85543707
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2025 Chevrolet Corvette | Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Evaporator Tube Part Number: 23435951
$82.48 MSRP: $149.27
You Save: $66.79 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly-A/C Evaporator; A/C Refrigerant Liquid Hose; A/C Hose
- Replaces: 23175602, 22961596
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Corvette | Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Evaporator Tube Part Number: 23175602
$82.48 MSRP: $149.27
You Save: $66.79 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly-A/C Evaporator; A/C Refrigerant Liquid Hose; A/C Hose
- Replaced by: 23435951
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014 Chevrolet Corvette | Stingray | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Discharge Hose Part Number: 84678721
$95.18 MSRP: $172.28
You Save: $77.10 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Air Conditioner Compressor; A/C Refrigerant Liquid Hose; A/C Hose; Front A/C Tube; Hose, A/C Compressor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2025 Chevrolet Corvette | E-Ray, Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Suction & Discharge Hose Assembly Part Number: 84525737
$99.79 MSRP: $180.62
You Save: $80.83 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-A/C Compressor; A/C Refrigerant Liquid Hose; A/C Hose; Rear A/C Hose; Hose, A/C Compressor
- Replaced by: 85832241
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2025 Chevrolet Corvette | E-Ray, Stingray | 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Suction & Discharge Hose Assembly Part Number: 85587994
$140.50 MSRP: $254.30
You Save: $113.80 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-A/C Compressor; Rear A/C Hose; Hose, A/C Compressor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023-2025 Chevrolet Corvette | Z06 | 8 Cyl 5.5 L GAS
View related parts
Chevrolet Corvette Center A/C Tube Part Number: 86511430
$214.85 MSRP: $388.87
You Save: $174.02 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly-A/C Condenser & A/C Evaporator; Tube, A/C Refrigerant (All Metal)
- Position: Center
- Replaced by: 85791488
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2024-2025 Chevrolet Corvette | E-Ray, Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Suction & Discharge Hose Assembly Part Number: 23373155
$102.94 MSRP: $183.82
You Save: $80.88 (44%)
Product Specifications
- Other Name: Hose, Air Conditioner Compressor; A/C Refrigerant Liquid Hose; A/C Hose; Front Pressure Hose; Hose, A/C Compressor
- Replaces: 22768496, 23435950
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2016 Chevrolet Corvette | Stingray, Z06 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette A/C Tube, Front Part Number: 22759527
$129.54 MSRP: $232.36
You Save: $102.82 (45%)
Product Specifications
- Other Name: Tube Assembly-A/C Evaporator Thermal Expansion Valve Front; A/C Refrigerant Liquid Hose; A/C Hose; Tube, A/C Refrigerant (All Metal)
- Position: Front
- Replaces: 10385363, 10442893
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2013 Chevrolet Corvette | 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Corvette A/C Tube Part Number: 10436323
Product Specifications
- Other Name: Tube Assembly-A/C Evaporator; A/C Refrigerant Liquid Hose; A/C Hose; Tube, A/C Refrigerant (All Metal)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2004 Chevrolet Corvette | 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS

| Page 1 of 3 |Next >

1-20 of 51 Results

Chevrolet Corvette A/C Hose

Want to cut long-term maintenance and repair costs? Choose OEM A/C Hose. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Corvette parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Corvette A/C Hose includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Corvette A/C Hose is one of the crucial parts of the vehicle since it has an important function of supplying refrigerant for ventilating the cabin. This A/C Hose is withstand the high pressures generated by the refrigerant, aluminum fittings are provided in it which are crimping at both ends and the hose is made leak proof. Chevrolet A/C Hose could be regarded as the essential upgrade for Corvette as it improves the car's braking and cooling system, and with outstanding performance, it can be recommended to every Corvette fan. The A/C Hose works harmoniously in the first through eighth generations of Corvette vehicles, adapting its construction and material makeup to meet the conditions of each generation Corvette vehicle so that the Chester Chevrolet Corvette remains an agreeable car to be in as a driver. First of all, the A/C Hose is a part of the Corvette that enhances the vehicle's high-performance characteristic by enabling the motorists to drive smoothly while offering them a comfortable ride at the same time. In the practical aspect, significant characteristics of the Chevrolet A/C Hose are capability to work under high and low temperatures and pressures to suit the Corvette brand exemplary high-performance car. Therefore, the A/C Hose occupies a special niche in the automotive market and can be called the element of reliability, efficiency, and safety for Corvette. No driver prefers to drive in a hot car especially when headed for a long drive whether it is in the city roads or on the highways; this is why the Chevrolet A/C Hose provides a cool and comfortable cabin.

Chevrolet Corvette A/C Hose Parts and Q&A

A/C Tube, Front
22759527
Q: How to replace the Front A/C Hose on Chevrolet Corvette?
A:
You need to recover refrigerant before replacing the front tube of the air conditioning evaporator. First uninstall the battery while removing the a/c tube connector at the evaporator rear line assembly. Remove the two components from the front evaporator inlet line by disconnecting it from the body retaining clip and removing the refrigerant pressure sensor electrical connector. The vehicle should be elevated before removing the front evaporator inlet line to A/C Condenser lower bolt while using caps or tape to seal open a/c components from contamination. Free the front evaporator line inlet from the A/C Condenser using proper procedures then discard the sealing washer before taping or capping the open A/C Condenser. Lower the vehicle while you separate the front evaporator inlet line from its position on the evaporator rear line assembly then discard both o-rings before capping or taping the evaporator rear line assembly. Proceed by disconnecting surge tank outlet hose along with inlet heater hose from their connection to underhood junction box retainer clip and then remove the front evaporator inlet line from the vehicle. The installation process involves attaching the front evaporator inlet line to the vehicle and connecting both surge tank outlet hose and inlet heater hose with the underhood junction box retainer clip. The evaporator rear line assembly needs its cap or tape removed before new o-rings can be installed to this assembly. Attach the front evaporator inlet line to the evaporator rear line assembly after which you must elevate the vehicle before removing the cap or tape from the A/C Condenser. Use a new sealing washer to connect the front evaporator inlet line with the A/C Condenser while tightening the lower front evaporator inlet line to A/C Condenser bolt to 16 nm (12 lb ft). Lower the vehicle while joining the front evaporator inlet line to its body retention clip then hook up the refrigerant pressure sensor electrical connector. The procedure involves connecting the a/c tube connector to the evaporator rear line assembly followed by reinstallation of the battery and system evacuation and recharging. Additionally the leak testing of component fittings requires the j 39400-a - halogen leak detector.
A/C Hoses
15250411
Q: How to replace the Rear A/C Hose on Chevrolet Corvette?
A:
The first step to replace the rear evaporator tube requires recovering the refrigerant properly from the a/c system. The first step involves removing both battery and Intake Manifold components. Start by detaching the front evaporator inlet line through its body retaining clip and then disconnect the refrigerant pressure sensor electrical connector. Proceed with disconnecting the a/c tube connectors from the evaporator rear line assembly then unlinking the front evaporator inlet line from the evaporator rear line assembly yet ensure all open a/c components receive caps or tape for contamination prevention. The procedure requires removing both o-rings and sealing the front evaporator inlet line and disconnecting the a/c compressor line from the evaporator rear line assembly. Dispose of both o-rings before completing frontal and evaporator procedures. First cap or tape the front evaporator line along with the a/c compressor line before removing the retaining cowl stud nut and the thermal expansion valve (TXV) block fitting nut . Remove the rear evaporator line assembly from the vehicle while capping the front evaporator inlet line as well as the txv because you should discard the seal washers. To install the device users must remove protective tape or cap from the txv while applying specified pag oil on the evaporator rear line assembly in case of replacement. After adding new seal washers the evaporator rear line assembly needs installation in the vehicle while you connect it to the retainer bracket stud and the txv. The installation procedure involves screwing the txv block fitting nut using torque to 20 n.m (15 lb ft) followed by installing the heater pipe bracket retaining nut with the proper torque of 10 n.m (7 lb ft). First take away the caps or tape from the evaporator front line and a/c compressor line then install new o-rings to the rear evaporator line assembly and join these lines to each other. First connect the front evaporator line to the evaporator rear line assembly and then attach the a/c tube connectors to the same assembly and connect the refrigerant pressure sensor electrical connector. The service procedure ends by reattaching the front evaporator inlet line to the body retaining clip and reinstalling both the Intake Manifold and battery while the a/c system requires evacuation and recharging followed by a leak detection test on fittings with the halogen leak detector (J 39400-A).