How to replace the A/C Condenser in an A/C system on Chevrolet Corvette?

When replacing the condenser begin by conducting a leak test on the component fittings using a halogen leak detector (J 39400-A). Start by removing all refrigerant from the a/c system. Take out the upper radiator support first. Disassembly of the A/C Condenser fitting requires separating the compressor hose assembly by removing the bolt while immediately using caps or tape covers to protect open a/c components from contamination. Remove the front evaporator inlet line from the A/C Condenser and throw away the seal washer with proper line end protection. Begin by elevating the vehicle then uninstall the front evaporator inlet line bolt to disconnect it while throwing away the seal washer and placing a cap on the open end of the line. Lift the vehicle upright then eliminate the lh and rh radiator air baffle upper retainer pins from their position. Patiently move the air baffle forward to expand installation space before sliding the A/C Condenser up along the radiator until its tabs clear the slots and pull the condenser free of the vehicle. For new A/C Condenser installation please add pag oil according to specifications before attaching the condenser into its proper position inside the vehicle and securing its tabs into the radiator slots. After removing the caps or tape from the front evaporator inlet line connect it to the A/C Condenser while installing a new seal washer and tightening that bolt to 16 n.m (12 lb ft). Lower the vehicle and remove and reinstall the a/c compressor hose assembly together with its new seal washer while making bolt torque to 16 n.m (12 lb ft). As the last step install the upper radiator support and perform an a/c system evacuation and recharging process followed by a halogen leak detector j 39400-a test.

OEM Chevrolet Corvette A/C Condenser

Air Conditioning Condenser

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 A/C Condensers found

View related parts
Chevrolet Corvette Condenser Part Number: 23237860
$215.66 MSRP: $305.63
You Save: $89.97 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly-A/C; A/C Condenser; Condenser, A/C Condenser
- Replaces: 20979403, 84524663
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Corvette | Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Condenser Part Number: 10442892
$239.65 MSRP: $410.04
You Save: $170.39 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser, A/C; A/C Condenser; Condenser A/C; Condenser, A/C Condenser
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2013 Chevrolet Corvette | 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Corvette Condenser, Passenger Side Part Number: 85601834
$127.18 MSRP: $190.10
You Save: $62.92 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly-A/C (Right-Hand Proc); Condenser, A/C Condenser
- Position: Passenger Side
- Replaces: 85106898, 84752395
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Corvette | E-Ray, Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Condenser, Driver Side Part Number: 85601833
$127.18 MSRP: $190.10
You Save: $62.92 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly-A/C; Condenser, A/C Condenser
- Position: Driver Side
- Replaces: 84752393, 85106897
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Corvette | E-Ray, Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Condenser Part Number: 52463706
Product Specifications
- Other Name: Condenser Assembly-A/C; A/C Condenser; Condenser, A/C Condenser
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Corvette | Base, Collector's Edition, Grand Sport, Indianapolis 500 Pace Car, ZR-1 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Condenser Part Number: 52456459
Product Specifications
- Other Name: Condenser Assembly-A/C; A/C Condenser; Condenser, A/C Condenser
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1993 Chevrolet Corvette | 40th Anniversary Edition, Base, ZR-1 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Condenser Part Number: 3096179
Product Specifications
- Other Name: Condenser Assembly-A/C; A/C Condenser; Condenser, A/C Condenser
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988 Chevrolet Corvette | 35th Anniversary Edition, Base | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Condenser Part Number: 3056639
Product Specifications
- Other Name: Condenser Assembly-A/C; A/C Condenser; Condenser, A/C Condenser
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1989, 1984-1987 Chevrolet Corvette | Base, Indianapolis 500 Pace Car | 8 Cyl 5.7 L GAS

Chevrolet Corvette A/C Condenser

Want to cut long-term maintenance and repair costs? Choose OEM A/C Condenser. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Corvette parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Corvette A/C Condenser includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The A/C Condenser found on Chevrolet Corvette is necessary heat exchanger equipment, which performs the process of cooling down the gaseous refrigerant and the subsequent transition of the liquid form to the accumulator. Normally situated ahead of the radiator, it is a network of tubes helping to cool the setup generally known as the core. Different Corvette models could have had different styles of A/C Condenser due to developments of new designs and high efficiency over the years. Although to specific types, the development of the A/C Condenser in these vehicles might have added features such as; changes in material type, quality and methods of construction to increase effectiveness and durability of the vehicle part. In summary, the A/C Condenser is paramount in regulating the cabin comfort contributing to efficient refrigerant control.

Chevrolet Corvette A/C Condenser Parts and Q&A

Condenser
10442892
Q: How to replace the A/C Condenser in an A/C system on Chevrolet Corvette?
A:
When replacing the condenser begin by conducting a leak test on the component fittings using a halogen leak detector (J 39400-A). Start by removing all refrigerant from the a/c system. Take out the upper radiator support first. Disassembly of the A/C Condenser fitting requires separating the compressor hose assembly by removing the bolt while immediately using caps or tape covers to protect open a/c components from contamination. Remove the front evaporator inlet line from the A/C Condenser and throw away the seal washer with proper line end protection. Begin by elevating the vehicle then uninstall the front evaporator inlet line bolt to disconnect it while throwing away the seal washer and placing a cap on the open end of the line. Lift the vehicle upright then eliminate the lh and rh radiator air baffle upper retainer pins from their position. Patiently move the air baffle forward to expand installation space before sliding the A/C Condenser up along the radiator until its tabs clear the slots and pull the condenser free of the vehicle. For new A/C Condenser installation please add pag oil according to specifications before attaching the condenser into its proper position inside the vehicle and securing its tabs into the radiator slots. After removing the caps or tape from the front evaporator inlet line connect it to the A/C Condenser while installing a new seal washer and tightening that bolt to 16 n.m (12 lb ft). Lower the vehicle and remove and reinstall the a/c compressor hose assembly together with its new seal washer while making bolt torque to 16 n.m (12 lb ft). As the last step install the upper radiator support and perform an a/c system evacuation and recharging process followed by a halogen leak detector j 39400-a test.