How to replace the muffler on RPOs LE5/LSJ on Chevrolet Cobalt?

You must first support and lift the vehicle for rpos le5/lsj Muffler replacement work. The exhaust and tailpipe cutter (SA9168NE) should be used to cut the exhaust Muffler pipe at the front weld location ahead of the weld. Afterward the support the exhaust Muffler. Begin by removing the Muffler insulator from its position on the underbody hanger and proceed to remove the exhaust Muffler. Follow this step by cleaning up the Muffler pipe end through deburring when needed. Put the Muffler inlet pipe onto the Muffler pipe before installing the Muffler insulator to the underbody hanger. Position the service Muffler clamp on the Muffler inlet pipe at a distance of 19 mm (3/4 inch) from the edge of the inlet while2156 aligning the clamp nuts to face away from the evaporative emission (EVAP) canister. Place the Muffler against the vehicle underbody and rear bumper fascia while you maintain its position by tightening the exhaust clamp nuts to 45 nm (33 ft. Lbs.). Finally, lower the vehicle.

OEM Chevrolet Cobalt Muffler

Exhaust Muffler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Mufflers found

View related parts
Chevrolet Cobalt Muffler Part Number: 15283438
$629.47
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler, Exhaust; Muffler, Exhaust Tail Pipe
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chevrolet Cobalt | Base, LS, LT, LTZ | 4 Cyl 2.2 L GAS
View related parts
Chevrolet Cobalt Muffler & Pipe Part Number: 25830118
Product Specifications
- Other Name: Muffler Assembly-Exhaust (W/Resonator, Exhaust & Tail Pipe; Exhaust Pipe; Muffler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2009 Chevrolet Cobalt | SS | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Cobalt Muffler & Pipe Part Number: 20766954
Product Specifications
- Other Name: Muffler Assembly-Exhaust (W/Resonator, Exhaust & Tail Pipe; Exhaust Pipe; Muffler; Muffler, Exhaust Tail Pipe; Muffler, Exhaust
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chevrolet Cobalt | SS | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Cobalt Muffler Part Number: 15283439
Product Specifications
- Other Name: Muffler, Exhaust; Muffler, Exhaust Tail Pipe
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Cobalt | Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Muffler Part Number: 15283437
Product Specifications
- Other Name: Muffler, Exhaust; Muffler, Exhaust Tail Pipe
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chevrolet Cobalt | Base, LS, LT, LTZ | 4 Cyl 2.2 L GAS

Chevrolet Cobalt Muffler

Want to cut long-term maintenance and repair costs? Choose OEM Muffler. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Cobalt parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Cobalt Muffler includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Cobalt Muffler is an exhaust part that functions effectively in a remarkable array of Cobalt types. Manufactured to direct exhaust gasses as far off from passengers' proximity as possible the Chevrolet Cobalt Muffler relieves the carry of the engine noise through a complex maze of chambers and passages that contributes to overall reduction of sound pressure. Intended from stainless steel and aluminized steel this Chevrolet muffler will last longer and is not prone to rusting and therefore proves to be ideal for Cobalt owners. Its compatibility includes several generations of Cobalt both in coupe and sedan modifications and contributes to the improvement of the car's performance indicators, increasing its efficiency and safety due to compliance with noise standards. This product also provides possibilities of entering design solutions, including round and oval shapes, that is, depending on personal desires and characteristics of vehicles. This especially refers to performance oriented versions which offer better exhaust flow and noise preferably at the expense of noise dampening. Its ability to fulfill a necessary function in the exhaust system along with the variation of the product directs our attention to the importance of the Chevrolet Muffler in the niche of car part sales. First, last but certainly not least, the Chevrolet Muffler is quite notable for its ability to perform its intended duty but also for its ability to boost the Cobalt's performance; hence the Chevrolet Cobalt Muffler is an absolute essential.

Chevrolet Cobalt Muffler Parts and Q&A

Muffler
15283438
Q: How to replace the muffler on RPOs LE5/LSJ on Chevrolet Cobalt?
A:
You must first support and lift the vehicle for rpos le5/lsj Muffler replacement work. The exhaust and tailpipe cutter (SA9168NE) should be used to cut the exhaust Muffler pipe at the front weld location ahead of the weld. Afterward the support the exhaust Muffler. Begin by removing the Muffler insulator from its position on the underbody hanger and proceed to remove the exhaust Muffler. Follow this step by cleaning up the Muffler pipe end through deburring when needed. Put the Muffler inlet pipe onto the Muffler pipe before installing the Muffler insulator to the underbody hanger. Position the service Muffler clamp on the Muffler inlet pipe at a distance of 19 mm (3/4 inch) from the edge of the inlet while2156 aligning the clamp nuts to face away from the evaporative emission (EVAP) canister. Place the Muffler against the vehicle underbody and rear bumper fascia while you maintain its position by tightening the exhaust clamp nuts to 45 nm (33 ft. Lbs.). Finally, lower the vehicle.