How to replace the center exhaust pipe on Chevrolet Cobalt?

The first step to replace the intermediate pipe involves vehicle elevation followed by supporting the exhaust Muffler. Start cutting the exhaust extension pipe directly in front of its weld at the exhaust Muffler so you can remove it after releasing both the underbody hanger insulators. First position the catalytic converter pipe for support and afterward remove the catalytic converter pipe-to-exhaust extension pipe nuts. Support the exhaust extension pipe through its underbody hanger insulators after removing protection from the mount points then remove it from the vehicle by separating it from the converter pipe. You should completely clean away the gasket residue from the converter pipe flange surface. The first step for installation includes fitting a new exhaust gasket around the service exhaust extension pipe which should be properly retained by its flange studs before connecting the extension pipe to the converter pipe while maintaining it in position. Firmly tighten the catalytic converter pipe-to-exhaust extension pipe nuts to 30 nm (22 ft. Lbs.). The exhaust extension pipe should be mounted to underbody hanger insulators before installing the Muffler onto the vehicle body. The Muffler inlet pipe should slide onto the extension pipe before you install the Muffler insulator onto the underbody hanger. Begin attaching the Muffler clamp on the Muffler inlet pipe while orienting the clamp nuts against the evap canister facing direction. Maintain the clamp at a location 19 mm (¾ inch) from the Muffler inlet edge. Position the Muffler and tailpipe to the vehicle underbody as well as rear bumper fascia while keeping the Muffler in position before tightening exhaust clamp nuts to 45 nm (33 ft. Lbs.). Finally, lower the vehicle.

OEM Chevrolet Cobalt Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Exhaust Pipes found

View related parts
Chevrolet Cobalt Intermediate Pipe Part Number: 15283436
$72.59 MSRP: $421.86
You Save: $349.27 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Exhaust Pipe
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chevrolet Cobalt | Base, LS, LT, LTZ | 4 Cyl 2.2 L GAS
View related parts
Chevrolet Cobalt Muffler Part Number: 15283438
$629.47
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler, Exhaust; Muffler, Exhaust Tail Pipe
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chevrolet Cobalt | Base, LS, LT, LTZ | 4 Cyl 2.2 L GAS
View related parts
Chevrolet Cobalt Catalytic Converter Part Number: 19418953
$1519.64 MSRP: $2487.99
You Save: $968.35 (39%)
ADD TO CART
Product Specifications
- Other Name: Converter Assembly, 3Way Catalytic (W/Exhaust Manifold Pipe) "Kit"; Converter & Pipe; Converter, Catalytic Converter; Converter, Exhaust Pipe
- Replaces: 15889902, 22939743
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chevrolet Cobalt | Base, LS, LT, Sport | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Muffler & Pipe Part Number: 25830118
Product Specifications
- Other Name: Muffler Assembly-Exhaust (W/Resonator, Exhaust & Tail Pipe; Exhaust Pipe; Muffler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2009 Chevrolet Cobalt | SS | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Cobalt Intermediate Pipe Part Number: 15887565
Product Specifications
- Other Name: Exhaust Pipe
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005 Chevrolet Cobalt | SS | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Cobalt Catalytic Converter Part Number: 22712597
Product Specifications
- Other Name: Converter Assembly-3Way Catalytic (W/Exhaust Manifold P; Exhaust Pipe; Converter & Pipe; Converter, Catalytic Converter; Converter, Exhaust Pipe
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006 Chevrolet Cobalt | LS, LT, LTZ | 4 Cyl 2.2 L GAS
View related parts
Chevrolet Cobalt Catalytic Converter Part Number: 22695583
Product Specifications
- Other Name: Converter Assembly-3Way Catalytic (W/Exhaust Manifold P; Exhaust Pipe; Converter & Pipe; Converter, Catalytic Converter; Converter, Exhaust Pipe
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006 Chevrolet Cobalt | LS, LT, LTZ | 4 Cyl 2.2 L GAS
View related parts
Chevrolet Cobalt Exhaust Pipe Part Number: 20766957
Product Specifications
- Other Name: Intermediate Pipe; Intermed Pipe; Pipe, Exhaust Tail Pipe
- Replaces: 15831716, 25808621
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chevrolet Cobalt | Base, LS, LT, LTZ | 4 Cyl 2.2 L GAS
View related parts
Chevrolet Cobalt Muffler & Pipe Part Number: 20766954
Product Specifications
- Other Name: Muffler Assembly-Exhaust (W/Resonator, Exhaust & Tail Pipe; Exhaust Pipe; Muffler; Muffler, Exhaust Tail Pipe; Muffler, Exhaust
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chevrolet Cobalt | SS | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Cobalt Exhaust Pipe Part Number: 19210866
Product Specifications
- Other Name: Pipe Assembly, Exhaust Resonator; Intermediate Pipe; Pipe, Exhaust Tail Pipe
- Replaces: 15887503
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Cobalt | Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Muffler Part Number: 15283439
Product Specifications
- Other Name: Muffler, Exhaust; Muffler, Exhaust Tail Pipe
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Cobalt | Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Muffler Part Number: 15283437
Product Specifications
- Other Name: Muffler, Exhaust; Muffler, Exhaust Tail Pipe
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chevrolet Cobalt | Base, LS, LT, LTZ | 4 Cyl 2.2 L GAS

Chevrolet Cobalt Exhaust Pipe

Want to cut long-term maintenance and repair costs? Choose OEM Exhaust Pipe. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Cobalt parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Cobalt Exhaust Pipe includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Cobalt Exhaust Pipe is an outstanding commodity, which stresses on the dependability and superiority of the Chevrolet Cobalt line. Functioning to effectively remove bad gases including carbon monoxide from the engine, exhaust pipe helps filter out such poisonous gasses from getting into the engine well or the interior of the vehicle to aid in boosting the safety of all passengers. Specifically used on the Chevrolet Cobalt line of cars with first and second generations, the exhaust pipe is highly essential in enhancing the efficiency of the car's engine. Its specific location and strong construction ensure that problems such as vibration or exhaust noises are minimized; issues which are dangerous to the car's operations. The Chevrolet Cobalt Exhaust Pipe is in a position of either joining perfectly with other features of the exhaust system like the muffler and the catalytic converter for the safe and conducive discharge of expulsions from the engine. For instance, some types have a dual or central pipe arrangement that contributes to superior performance; therefore, the Chevrolet Cobalt is one of the great trends in the automotive industry. In order to have a proper functioning of the exhaust pipe, it is important to have its proper inspection and to maintain it frequently so as to give a long life to it; this once again adds up to the reliability factor of the Chevrolet Cobalt. The Chevrolet Cobalt Exhaust Pipe is therefore a prime representation of efficiency, safety and performance that makes the entire Chevrolet Cobalt process a rich experience for the customers.

Chevrolet Cobalt Exhaust Pipe Parts and Q&A

Muffler
15283438
Q: How to replace the center exhaust pipe on Chevrolet Cobalt?
A:
The first step to replace the intermediate pipe involves vehicle elevation followed by supporting the exhaust Muffler. Start cutting the exhaust extension pipe directly in front of its weld at the exhaust Muffler so you can remove it after releasing both the underbody hanger insulators. First position the catalytic converter pipe for support and afterward remove the catalytic converter pipe-to-exhaust extension pipe nuts. Support the exhaust extension pipe through its underbody hanger insulators after removing protection from the mount points then remove it from the vehicle by separating it from the converter pipe. You should completely clean away the gasket residue from the converter pipe flange surface. The first step for installation includes fitting a new exhaust gasket around the service exhaust extension pipe which should be properly retained by its flange studs before connecting the extension pipe to the converter pipe while maintaining it in position. Firmly tighten the catalytic converter pipe-to-exhaust extension pipe nuts to 30 nm (22 ft. Lbs.). The exhaust extension pipe should be mounted to underbody hanger insulators before installing the Muffler onto the vehicle body. The Muffler inlet pipe should slide onto the extension pipe before you install the Muffler insulator onto the underbody hanger. Begin attaching the Muffler clamp on the Muffler inlet pipe while orienting the clamp nuts against the evap canister facing direction. Maintain the clamp at a location 19 mm (¾ inch) from the Muffler inlet edge. Position the Muffler and tailpipe to the vehicle underbody as well as rear bumper fascia while keeping the Muffler in position before tightening exhaust clamp nuts to 45 nm (33 ft. Lbs.). Finally, lower the vehicle.