How to service and repair the front coil springs and shock absorber on Chevrolet Cobalt?

To do suspension strut servicing and repair, remove the strut from vehicle. Mount the strut to the j 45400, with the spring compressed for free motion. Turn the spring compressor forcing screw until coil spring is compressed, then loosen the screw and remove the upper strut mount and coil spring. Upon the steering arm, with a 45 torx(R) socket at the end of the strut shaft and strut rod socket and the similar hold the upper strut mount nut. Follow the same process on the coil spring and strut mount to the j45400 and install the coil spring and upper strut mount back into the j45400. After compressing the coil spring once more, using the spring compressor forcing screw, insert the strut to the coil spring and upper strut mount loosely put on the strut retaining nut. Use a 45 torx(R) socket to clamp the strut shaft; a strut rod socket or comparable for the upper strut mount nut, and tighten it to 75 nm (55Ib.ft). Lastly, take the strut away from the j 45400 and replace it back to the vehicle.

How to Replace the Front Coil Springs and Shock Absorber on Chevrolet Cobalt?

The necessary tools needed for strut component or spring and strut replacement include a strut spring compressor (J 45400). Strut spring compressor (J 45400). Begin by placing the strut into the strut spring compressor (J 45400) before stripping it out of the car. Operators should use the compressor forcing screw to turn it until the coil spring can move freely of its own accord. Turning the forcing screw on the compressor allows removal of both the upper strut mount and coil spring. To remove the upper strut mount nut use a 45 torx socket for holding the strut shaft with a strut rod socket or equivalent as tool of choice. Start assembly by putting the upper strut mount followed by the coil spring back into the strut spring compressor (J 45400). Use the compressor forcing screw (J 45400) to compress the coil spring before installing the strut to its spring and upper strut mount. Install the strut retaining nut without full torque at this point then use a 45 torx socket to install the upper strut mount nut to 75 nm (55 ft. Lbs.). Use the strut spring compressor (J 45400) to remove the strut then reinstall it into the vehicle.

OEM Chevrolet Cobalt Coil Springs

Strut Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Coil Springs found

View related parts
Chevrolet Cobalt Coil Spring, Rear Part Number: 22705489
$48.34 MSRP: $94.64
You Save: $46.30 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Rear Spring; Coil Spring Set; Coil Springs; Spring
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Coil Spring, Rear Part Number: 10390024
Product Specifications
- Other Name: Spring, Rear Spring; Coil Spring Set; Coil Springs; Spring
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Coil Spring, Driver Side Part Number: 22712125
Product Specifications
- Other Name: Spring-Front; Coil Springs; Spring
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Spring, Front Part Number: 25833647
Product Specifications
- Other Name: Spring-Front; Coil Springs; Spring, Front Chassis
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chevrolet Cobalt | Base, LS, LT, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Coil Spring, Rear Part Number: 25821162
Product Specifications
- Other Name: Spring, Rear Spring; Coil Spring Set; Coil Springs; Spring
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chevrolet Cobalt | Base, LS, LT, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Coil Spring, Front Part Number: 22735635
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs; Spring
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Coil Spring, Front Part Number: 22735634
Product Specifications
- Other Name: Spring, Front Chassis; Coil Spring Set; Coil Springs; Spring
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Coil Spring, Front Part Number: 22735633
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Coil Spring, Front Part Number: 22712120
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Spring, Front Part Number: 21994335
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2007 Chevrolet Cobalt | Base, LS, LT, LTZ, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Coil Spring, Front Part Number: 15249490
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Coil Spring, Front Part Number: 10376192
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Coil Spring, Driver Side Part Number: 10376190
Product Specifications
- Other Name: Spring-Front; Coil Springs; Spring; Spring, Front Chassis
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Coil Spring, Front Passenger Side Part Number: 10376189
Product Specifications
- Other Name: Spring-Front; Coil Springs; Spring; Spring, Front Chassis
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

Chevrolet Cobalt Coil Springs

Want to cut long-term maintenance and repair costs? Choose OEM Coil Springs. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Cobalt parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Cobalt Coil Springs includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Coil Springs used in the Chevrolet Cobalt cars are used to provide support to the weight of the car while absorbing shocks from the road to ensure that the car's rides at a standard height and wheels are parallel to the ground. Some signs that indicate that the coil springs are worn out include: When the coil springs are worn out to the extent that they just do not force the weight on to the axle while the car is in motion they sag, they bottom and the tires alternatively wear out. The specific types of springs that are available include top-tier specification springs, variable rate springs, and cargo coil springs depending on customers' loads. Chevrolet Cobalt Coil Springs are categorized depending on the type of use; these categories are the linear rate, progressive and the dual rate springs. Conventional springs offer a comfortable ride as well as avoiding contact with the bump stop during powerful cornering. Other setups include the adjustable coilovers and height adjustable springs which can all be used to set the all important ride height without swapping the lowering kit in its entirety. Coil springs are used for assembly in the lift and lowering kits that plays a vital role in improving the vehicle's performance and stability in different terrains.

Chevrolet Cobalt Coil Springs Parts and Q&A

Coil Spring, Front
10376192
Q: How to service and repair the front coil springs and shock absorber on Chevrolet Cobalt?
A:
To do suspension strut servicing and repair, remove the strut from vehicle. Mount the strut to the j 45400, with the spring compressed for free motion. Turn the spring compressor forcing screw until coil spring is compressed, then loosen the screw and remove the upper strut mount and coil spring. Upon the steering arm, with a 45 torx(R) socket at the end of the strut shaft and strut rod socket and the similar hold the upper strut mount nut. Follow the same process on the coil spring and strut mount to the j45400 and install the coil spring and upper strut mount back into the j45400. After compressing the coil spring once more, using the spring compressor forcing screw, insert the strut to the coil spring and upper strut mount loosely put on the strut retaining nut. Use a 45 torx(R) socket to clamp the strut shaft; a strut rod socket or comparable for the upper strut mount nut, and tighten it to 75 nm (55Ib.ft). Lastly, take the strut away from the j 45400 and replace it back to the vehicle.
Coil Spring, Front Passenger Side
10376189
Q: How to Replace the Front Coil Springs and Shock Absorber on Chevrolet Cobalt?
A:
The necessary tools needed for strut component or spring and strut replacement include a strut spring compressor (J 45400). Strut spring compressor (J 45400). Begin by placing the strut into the strut spring compressor (J 45400) before stripping it out of the car. Operators should use the compressor forcing screw to turn it until the coil spring can move freely of its own accord. Turning the forcing screw on the compressor allows removal of both the upper strut mount and coil spring. To remove the upper strut mount nut use a 45 torx socket for holding the strut shaft with a strut rod socket or equivalent as tool of choice. Start assembly by putting the upper strut mount followed by the coil spring back into the strut spring compressor (J 45400). Use the compressor forcing screw (J 45400) to compress the coil spring before installing the strut to its spring and upper strut mount. Install the strut retaining nut without full torque at this point then use a 45 torx socket to install the upper strut mount nut to 75 nm (55 ft. Lbs.). Use the strut spring compressor (J 45400) to remove the strut then reinstall it into the vehicle.