How to replace the muffler safely and effectively on Chevrolet Camaro?

Safeguarding yourself starts with handling the hot exhaust system while adhering to the necessary exhaust parts removal safety precautions. Start by taking off the track bar and driver's side rear tire before you install adjustable jack stands to support the rear axle. Start by removing the lower nut of the passenger side rear shock and end link of the stabilizer bar before extracting the rear shock from the axle. Use the jack stands to lower the rear axle for an appropriate distance by removing these bolts from the torque arm at that location. Start by removing the passenger side rear coil spring and bushing before taking out the left Exhaust Hanger from under the vehicle's body. Pull the exhaust pipe clamp loose (same for 5.7 L and 3.8 L models) so you can lower the right rear axle side enough to remove the Muffler by rotating it out behind the vehicle. Install the Exhaust Hanger(s) on the new Muffler before you put the Muffler onto the vehicle (5.7 L depicted, 3.8 L follows similar procedure). Afterward raise the rear axle. Screw the exhaust pipe clamp bolt to 48 nm (35 ft. Lbs.) after installing the left exhaust Muffler hanger to the underbody while securing the hanger bolts to a torque of 10 nm (89 inch lbs.). Raise the axle fully to install the torque arm bolts at the rear axle, torquing them to 130 nm (96 ft. Lbs.) and tightening its nuts to 132 nm (97 ft. Lbs.). Secure the shock to the rear axle while setting the rear shock nut torque to 90 nm (66 ft. Lbs.). Hook up the passenger side rear stabilizer bar end link and tighten its end link nut to 23 nm (17 ft. Lbs.). Reinstall the track bar after you remove the rear axle support and reattach the driver's side rear tire while securing the wheel nuts to 120 nm (89 ft. Lbs.).

How to service and repair the muffler on Chevrolet Camaro?

A vehicle should be raised and properly supported to service and repair the Muffler. Take out the track bar and the back-driver tire and support the rear axle with jack stands. Then, take away the rear stabilizer bar end-link, which articulates the passenger-side rear shock from the rear axle. Loosen the rear axle-bolts of the torque arm and lower the rear axle back a bit. Pull out the passenger side rear coil spring and bushing, remove the left Exhaust Hanger off of the underbody. Remove the exhaust Muffler clamp (5.7 L shown, 3.8L similar) and lower rear axle enough to get the Muffler out by rotating and sliding it out behind the vehicle. The Exhaust Hanger(s) need to be pulled to the new Muffler at which point the exhaust Muffler is installed to the vehicle (5.7 L), (3.8 L similarly) and the rear axle lifted. Tighten the exhaust Muffler clamp bolt to 48 nm (35 ft.lbs) and install left exhaust Muffler hanger to the underbody and tighten the hanger bolts to 10nm (89 inch lbs). Install the passenger side rear coil spring and bushing and lift axle completely. Mount the torque arm bolts to the rear axle and tighten them to 130 nm (96 ft. Lbs.) and the torque arm nuts with 132 nm (97 ft. Lbs.). Attach the passenger side rear shock to rear axle by torquing the rear shock nuts to 90 nm (66 ft. Lbs.) and attach the passenger side rear stabilizer bar end link torquing the end link nut to 23 nm (17 ft. Lbs.). Take out the rear axle support, place the driver's side rear and snug the wheel nuts to 120 nm (89 ft. Lbs.), then mount the track bar and drop the vehicle.

OEM Chevrolet Camaro Muffler

Exhaust Muffler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

53 Mufflers found

View related parts
Chevrolet Camaro Muffler & Pipe Assembly Part Number: 84578424
$911.59 MSRP: $1095.00
You Save: $183.41 (17%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler Assembly-Exhaust *Install 1.00; Exhaust Pipe; Muffler, Exhaust; Muffler
- Replaces: 84028867
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LT1, SS, ZL1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Muffler & Pipe Assembly Part Number: 84028867
$911.59 MSRP: $1095.00
You Save: $183.41 (17%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler Assembly-Exhaust *Install 1.00; Exhaust Pipe; Muffler, Exhaust; Muffler
- Replaced by: 84578424
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2018 Chevrolet Camaro | SS, ZL1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Muffler & Pipe Assembly Part Number: 84578420
$1244.59 MSRP: $1495.00
You Save: $250.41 (17%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler Assembly-Exhaust *Install 1.00; Exhaust Pipe; Muffler, Exhaust; Muffler
- Replaces: 84100442
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2023 Chevrolet Camaro | LS, LT | 2.0L L4, 4 Cyl 2.0 L GAS
View related parts
Chevrolet Camaro Muffler & Pipe Assembly Part Number: 84578419
$1327.84 MSRP: $1595.00
You Save: $267.16 (17%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler Assembly-Exhaust *Install 1.00; Exhaust Pipe; Muffler, Exhaust; Muffler
- Replaces: 84100441
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2023 Chevrolet Camaro | LS, LT | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Camaro Muffler & Pipe Part Number: 84072838
$1966.08 MSRP: $2939.47
You Save: $973.39 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler Assembly-Exhaust (W/Exhaust Aftertreatment); Exhaust Pipe; Muffler & Pipe Assembly; Muffler, Exhaust; Muffler
- Replaces: 23371134, 23405918
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2017 Chevrolet Camaro | LS, LT | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Camaro Muffler & Pipe Part Number: 84190987
$1940.04 MSRP: $3128.00
You Save: $1187.96 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler Assembly-Exhaust (W/Exhaust Aftertreatment); Exhaust Pipe; Muffler & Pipe Assembly; Muffler, Exhaust; Muffler
- Replaces: 23371135, 23405917, 84057128
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2018 Chevrolet Camaro | LS, LT | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Camaro Muffler & Pipe Part Number: 19420307
$2190.93 MSRP: $3277.07
You Save: $1086.14 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler Assembly, Exhaust (W/ Exhaust Aftertreatment); Exhaust Pipe; Muffler & Pipe Assembly; Muffler, Exhaust; Muffler
- Replaces: 23405920, 84073485, 23371132
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2017 Chevrolet Camaro | LS, LT | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Camaro Muffler & Pipe Part Number: 19420243
$1192.37 MSRP: $1790.71
You Save: $598.34 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler Assembly, Exhaust; Muffler & Pipe Assembly; Muffler, Exhaust
- Replaces: 23405925, 23350610, 84632430, 84465359
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2023 Chevrolet Camaro | LS, LT | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Camaro Muffler & Pipe Part Number: 85590473
$2220.61 MSRP: $3321.63
You Save: $1101.02 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler Assembly-Exhaust (W/Exhaust Aftertreatment); Muffler & Pipe Assembly; Muffler, Exhaust
- Replaces: 84203359, 84397018, 84864951, 84897437, 84560764
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 Chevrolet Camaro | LS, LT | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Camaro Muffler & Pipe Part Number: 84897450
$1928.74 MSRP: $2883.40
You Save: $954.66 (34%)
ADD TO CART
Product Specifications
- Other Name: Muffler Assembly-Exhaust (W/Exhaust Aftertreatment); Exhaust Pipe; Muffler & Pipe Assembly; Muffler, Exhaust; Muffler
- Replaces: 84560767, 23371137, 84016912, 84057135, 84190990, 84397015, 23413302, 84864967, 84314680
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LT1, SS | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Muffler & Pipe Part Number: 84864960
$1901.27 MSRP: $2842.16
You Save: $940.89 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler Assembly-Exhaust (W/Exhaust Aftertreatment); Muffler & Pipe Assembly; Muffler, Exhaust
- Replaces: 23413303, 84314678, 84465354
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LT1, SS, ZL1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Muffler & Pipe Part Number: 85590469
$1931.65 MSRP: $2887.77
You Save: $956.12 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler Assembly-Exhaust (W/Exhaust Aftertreatment); Muffler & Pipe Assembly; Muffler, Exhaust
- Replaces: 84897443
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 Chevrolet Camaro | LS, LT | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Camaro Muffler & Pipe Part Number: 84897451
$2002.96 MSRP: $3008.38
You Save: $1005.42 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler Assembly-Exhaust (W/Exhaust Aftertreatment); Exhaust Pipe; Muffler & Pipe Assembly; Muffler, Exhaust; Muffler
- Replaces: 84487201, 84190992, 84114143, 84205959, 84864970, 84314682, 84560758
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2024 Chevrolet Camaro | ZL1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Muffler & Pipe Part Number: 19420285
$2035.06 MSRP: $3043.64
You Save: $1008.58 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler Assembly, Exhaust (W/ Exhaust Aftertreatment); Exhaust Pipe; Muffler & Pipe Assembly; Muffler, Exhaust; Muffler
- Replaces: 23405919, 23371133, 84057131, 84190988
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2018 Chevrolet Camaro | LS, LT | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Camaro Muffler & Pipe Part Number: 19420313
$1018.06 MSRP: $1516.03
You Save: $497.97 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler Assembly, Exhaust (W/ Exhaust Aftertreatment)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LT1, SS | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Muffler & Pipe Part Number: 85590474
$2080.84 MSRP: $3111.77
You Save: $1030.93 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler Assembly-Exhaust (W/Exhaust Aftertreatment); Muffler & Pipe Assembly; Muffler, Exhaust
- Replaces: 84203358, 84678956, 84864952, 19420242, 84465356
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 Chevrolet Camaro | LS, LT | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Camaro Muffler & Pipe Part Number: 85590472
$2070.74 MSRP: $2818.56
You Save: $747.82 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler Assembly-Exhaust (W/Exhaust Aftertreatment); Muffler & Pipe Assembly; Muffler, Exhaust
- Replaces: 84203357, 84465353, 84864950, 84678955
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 Chevrolet Camaro | LS, LT | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Camaro Muffler & Pipe Assembly Part Number: 84578422
$911.59 MSRP: $1095.00
You Save: $183.41 (17%)
Product Specifications
- Other Name: Muffler Assembly-Exhaust *Install 1.00; Exhaust Pipe; Muffler, Exhaust; Muffler
- Replaces: 84028866
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LS, LT | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Camaro Muffler & Pipe Assembly Part Number: 84578423
$994.84 MSRP: $1195.00
You Save: $200.16 (17%)
Product Specifications
- Other Name: Muffler Assembly-Exhaust *Install 1.00; Exhaust Pipe; Muffler, Exhaust; Muffler
- Replaces: 23470001, 84028865
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LT1, SS, ZL1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Muffler & Pipe Assembly Part Number: 84578421
$994.84 MSRP: $1195.00
You Save: $200.16 (17%)
Product Specifications
- Other Name: Muffler Assembly-Exhaust *Install 1.00; Exhaust Pipe; Muffler, Exhaust; Muffler
- Replaces: 23470000, 84028864
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2024 Chevrolet Camaro | LT | 6 Cyl 3.6 L GAS

| Page 1 of 3 |Next >

1-20 of 53 Results

Chevrolet Camaro Muffler

Want to cut long-term maintenance and repair costs? Choose OEM Muffler. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Camaro parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Camaro Muffler includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Muffler is an indispensable part of Chevrolet Camaro cars and sound device characterized by Stability and Performance across the different models. Meant to properly direct dangerous fumes away from the passenger space, the Muffler of Camaro lessens noise produced by the engine with complex structures and channels that employ a process called destructive interference. Besides, improving the handling and the driveability this feature is also of paramount importance to safety and it makes sure that the emissions are cleared out of the car. The Muffler applies the well-known Camaro manufactured between 1967 and 2002, as well as the Camaro which was resumed in 2010. Its component parts are made of long-lasting and corrosion resistant materials that include stainless steel and aluminised steel this makes the shock absorbs to be durable and they are very useful in various driving applications. Further, performance oriented Mufflers can also be offered with even better exhaust flow and sound which is an attraction for car lovers. They play a part in efficiency of the Camaro by increasing its fuel efficiency and improving the power output of the vehicle. The Muffler can thus be highlighted in the automotive market as not only serving the primary purpose of managing sound while offering an emissions control solution but also providing augmentations and improvements to the iconic Chevrolet Camaro's performance and thus, being of interest to ordinary drivers and performance enthusiasts.

Chevrolet Camaro Muffler Parts and Q&A

Muffler & Pipe
10306198
Q: How to replace the muffler safely and effectively on Chevrolet Camaro?
A:
Safeguarding yourself starts with handling the hot exhaust system while adhering to the necessary exhaust parts removal safety precautions. Start by taking off the track bar and driver's side rear tire before you install adjustable jack stands to support the rear axle. Start by removing the lower nut of the passenger side rear shock and end link of the stabilizer bar before extracting the rear shock from the axle. Use the jack stands to lower the rear axle for an appropriate distance by removing these bolts from the torque arm at that location. Start by removing the passenger side rear coil spring and bushing before taking out the left Exhaust Hanger from under the vehicle's body. Pull the exhaust pipe clamp loose (same for 5.7 L and 3.8 L models) so you can lower the right rear axle side enough to remove the Muffler by rotating it out behind the vehicle. Install the Exhaust Hanger(s) on the new Muffler before you put the Muffler onto the vehicle (5.7 L depicted, 3.8 L follows similar procedure). Afterward raise the rear axle. Screw the exhaust pipe clamp bolt to 48 nm (35 ft. Lbs.) after installing the left exhaust Muffler hanger to the underbody while securing the hanger bolts to a torque of 10 nm (89 inch lbs.). Raise the axle fully to install the torque arm bolts at the rear axle, torquing them to 130 nm (96 ft. Lbs.) and tightening its nuts to 132 nm (97 ft. Lbs.). Secure the shock to the rear axle while setting the rear shock nut torque to 90 nm (66 ft. Lbs.). Hook up the passenger side rear stabilizer bar end link and tighten its end link nut to 23 nm (17 ft. Lbs.). Reinstall the track bar after you remove the rear axle support and reattach the driver's side rear tire while securing the wheel nuts to 120 nm (89 ft. Lbs.).
Muffler & Pipe
10306197
Q: How to service and repair the muffler on Chevrolet Camaro?
A:
A vehicle should be raised and properly supported to service and repair the Muffler. Take out the track bar and the back-driver tire and support the rear axle with jack stands. Then, take away the rear stabilizer bar end-link, which articulates the passenger-side rear shock from the rear axle. Loosen the rear axle-bolts of the torque arm and lower the rear axle back a bit. Pull out the passenger side rear coil spring and bushing, remove the left Exhaust Hanger off of the underbody. Remove the exhaust Muffler clamp (5.7 L shown, 3.8L similar) and lower rear axle enough to get the Muffler out by rotating and sliding it out behind the vehicle. The Exhaust Hanger(s) need to be pulled to the new Muffler at which point the exhaust Muffler is installed to the vehicle (5.7 L), (3.8 L similarly) and the rear axle lifted. Tighten the exhaust Muffler clamp bolt to 48 nm (35 ft.lbs) and install left exhaust Muffler hanger to the underbody and tighten the hanger bolts to 10nm (89 inch lbs). Install the passenger side rear coil spring and bushing and lift axle completely. Mount the torque arm bolts to the rear axle and tighten them to 130 nm (96 ft. Lbs.) and the torque arm nuts with 132 nm (97 ft. Lbs.). Attach the passenger side rear shock to rear axle by torquing the rear shock nuts to 90 nm (66 ft. Lbs.) and attach the passenger side rear stabilizer bar end link torquing the end link nut to 23 nm (17 ft. Lbs.). Take out the rear axle support, place the driver's side rear and snug the wheel nuts to 120 nm (89 ft. Lbs.), then mount the track bar and drop the vehicle.