In order to replace the generator, one should initially remove the negative
Battery Cable and the generator electrical connector. Now slide the boot down to show the terminal stud and remove the cable nut from the terminal and pull off the generator cable. Secondly, take off the
Drive Belt, the generator bolts, and the generator. When installing, the generator should be anchored in its position and secured with the generator bolts, tighten to 50 n.m (37 lb ft). Install the Drive Belt and connect the generator cable to the generator by first putting in the cable and then the cable nut for the generator that should be tightened 9 n.m (80 lb in). Lastly, slide over the boot the terminal stud, check the generator electrical connector, and reconnect the negative Battery Cable.