Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2003 Chevrolet Avalanche 1500 | Base, North Face, On Road Edition, WBH, Z71 | 8 Cyl 5.3 L GAS
Chevrolet Avalanche 1500 Fender Splash Shield
Want to cut long-term maintenance and repair costs? Choose OEM Fender Splash Shield. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Avalanche 1500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Avalanche 1500 Fender Splash Shield includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.
Chevrolet Avalanche 1500 Fender Splash Shield Parts and Q&A
Q: How to replace the rear Fender Splash Shield inner panel extension on Chevrolet Avalanche 1500?
A:
Start by removing the retainer strap from the inner panel extension backside before taking retainers off both front and rear points of the inner panel extension. Remove the rear wheelhouse inner panel extension from the vehicle after you pull off both the retainer strap from its rear side as well as front and rear retainers. Panels and retainers should be installed onto the rear wheelhouse inner panel extension through positioning it on the vehicle and securing the retainers at 1.7 N.m (15 lb in). Install and firmly secure the retainers on the inner panel extension front at 1.7 N.m (15 lb in). Put the retainer strap on the inner panel extension backside as the last installation step.
Q: How to replace the front Fender Splash Shield on Chevrolet Avalanche 1500?
A:
Start the wheelhouse panel replacement by removing the push-in retainers on the fender splash shield before proceeding to remove retainers from front fascia (when necessary). Start by detaching the top clips which maintain the harness position to the fender splash shield top and then remove the fender splash shield from the wheelhouse area. Place the fender splash shield inside the wheelhouse framework then fasten it by using the push-in retainers. Reposition the retainers attached to the front fascia the same way you did for removal and then secure the top clips which will hold the harness at the fender splash shield top.