OEM Chevrolet Avalanche 1500 Automatic Transmission Shift Levers

Chevrolet Avalanche 1500 Automatic Transmission Shift Levers Parts and Q&A

• Shift Lever
  26075107
  Q: How to replace Automatic Transmission Shift Levers with a Tow/Haul switch on Chevrolet Avalanche 1500?

  A:

  Start the conversion by detaching the lower column trim cover by taking off two torx(R) head screws from the area before you can remove the cover itself. Tenon the shift lever seal to expose the torx(R) head screw. Then remove it. Remove the knee bolster followed by its attaching nuts from the knee bolster deflector bracket. Before handling the instrument panel wiring harness remove its retaining pin while also taking out its wire harness retaining clip to avoid column steering damage. Uncover the insulation of the harness before disconnecting the wires from their electrical connector and then extract the shift lever. When installing the component first mount the shift lever followed by connection of the shifter electrical connector. The retainer clamp should be hooked back to its panel position following wire strap reattachment. Fasten the knee bolster deflector bracket using nuts that should be tightened to 9 n.m (80 lb in). After reattaching the knee bolster the torx(R) head screw needs to be secured with 1.5 n.m (13 lb in) torque while rolling the seal onto the screw. Install the lower column trim cover by using the two torx(R) head screws which need to be tightened to 3.5 n.m (31 lb in).