How to service the Ignition Control Module on Chevrolet Astro?

To service the Ignition Control Module, remove the engine cover first and then disconnect the electrical connector. Then, unscrew the screws that attach the ignition control module and the heat sink to the bracket, remove both and put them aside. For installation, mount the ignition control module and the heat sink back onto the bracket using screws , tightening them to 3.5 N.m (31 lb in). Next, reattach the electrical connectors and install the engine cover back.

How to replace the Ignition Control Module on Chevrolet Astro?

Before you can replace the ignition control module, take off the engine cover. Remove the electrical connector and afterwards take out the screws that secure the ignition control module and the heat sink to the bracket. Take the ignition control module and heat sink out from the bracket. For assembly, put the ignition control module and heat sink on the bracket, then use the screws to attach them with 3.5 N.m (31 lb in) of tightness. Make sure the connectors are reconnected, and then put on the engine cover.

OEM Chevrolet Astro Ignition Control Module

Ignition Spark Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Ignition Control Modules found

View related parts
Chevrolet Astro Control Module Part Number: 10482803
$134.05 MSRP: $275.46
You Save: $141.41 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module, Electronic Ignition Control (W/O Coil); Ignition Control Module; Ignition Module; ESC Control Module; Coil Module; Module
- Replaced by: 19435467
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2005 Chevrolet Astro | Base, LS, LT | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Astro Ignition Lock Cylinder Part Number: 19179578
$75.52 MSRP: $155.20
You Save: $79.68 (52%)
ADD TO CART
Product Specifications
- Other Name: Module Assembly, Distributor Ignition Control; Ignition Control Module; Ignition Module; Module; Module, Distributor (Also Knock Sensor)
- Replaced by: 19435461
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1995 Chevrolet Astro | Base, CL, CS, LT | 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet Astro Ignition Lock Cylinder Part Number: 19179581
$64.38 MSRP: $138.60
You Save: $74.22 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly, Distributor Ignition Control; Ignition Control Module; Ignition Module; Module; Module, Distributor (Also Knock Sensor)
- Replaced by: 19435464
- Replaces: 10457176, 10482832, 16140189, 16139869, 10482836, 10497133, 10456344, 10497132
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985 Chevrolet Astro | Base, CL, CS | 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet Astro Ignition Lock Cylinder Part Number: 19179579
$62.08 MSRP: $170.64
You Save: $108.56 (64%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly, Distributor Ignition Control; Ignition Control Module; Ignition Module; Module; Module, Distributor (Also Knock Sensor)
- Replaces: 01987465, 10482828, 16139379, 1987465, 10457765
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1990 Chevrolet Astro | Base, CL, CS | 4 Cyl 2.5 L GAS
View related parts
Chevrolet Astro ESC Module Part Number: 16128251
Product Specifications
- Other Name: Module, Distributor (Also Knock Sensor); Ignition Control Module; ESC Control Module; Module
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1992 Chevrolet Astro | Base, CL, CS, LT | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Astro Ignition Module Part Number: 19180772
Product Specifications
- Other Name: Module Assembly, Distributor Ignition Control; Ignition Control Module; Module; Module, Distributor (Also Knock Sensor)
- Replaces: 01894308, 10482821, 1894308
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985 Chevrolet Astro | Base, CL, CS | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Astro Ignition Module Part Number: 16208961
Product Specifications
- Other Name: Module, Distributor (Also Knock Sensor); Ignition Control Module; ESC Module; ESC Control Module
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2001 Chevrolet Astro | Base, LS, LT | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Astro ESC Control Module Part Number: 16048021
Product Specifications
- Other Name: Module, Distributor (Also Knock Sensor); Ignition Control Module
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985 Chevrolet Astro | Base, CL, CS | 6 Cyl 4.3 L GAS

Chevrolet Astro Ignition Control Module

Want to cut long-term maintenance and repair costs? Choose OEM Ignition Control Module. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Astro parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Astro Ignition Control Module includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Astro Ignition Control Module Parts and Q&A

Control Module
10482803
Q: How to service the Ignition Control Module on Chevrolet Astro?
A:
To service the Ignition Control Module, remove the engine cover first and then disconnect the electrical connector. Then, unscrew the screws that attach the ignition control module and the heat sink to the bracket, remove both and put them aside. For installation, mount the ignition control module and the heat sink back onto the bracket using screws , tightening them to 3.5 N.m (31 lb in). Next, reattach the electrical connectors and install the engine cover back.
Ignition Module
16208961
Q: How to replace the Ignition Control Module on Chevrolet Astro?
A:
Before you can replace the ignition control module, take off the engine cover. Remove the electrical connector and afterwards take out the screws that secure the ignition control module and the heat sink to the bracket. Take the ignition control module and heat sink out from the bracket. For assembly, put the ignition control module and heat sink on the bracket, then use the screws to attach them with 3.5 N.m (31 lb in) of tightness. Make sure the connectors are reconnected, and then put on the engine cover.