Other Name: Motor Assembly, Rear Window Wiper; Motor; Motor, Rear Window Wiper
Position: Rear
Replaces: 22111623
Fits the following Cadillac Models:
Brougham | 1992 | Base, d'Elegance | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
Fleetwood | 1993-1996 | Base, Brougham | 8 Cyl 5.7 L GAS
| Page 1 of 3 |Next >
1-20 of 48 Results
Cadillac Wiper Motor
Choose OEM Wiper Motor, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Cadillac's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Cadillac Wiper Motor. You can shop at highly competitive prices and protect your budget. All our genuine Cadillac parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.
Q: How to replace the wiper motor (LHD) on Cadillac CTS?
A:
You will need Wiper Linkage Separator (J 39232) and Wiper Linkage Installer (J 39529) to change the wiper motor on the left-hand drive. Unscrew the wiper transmission to dispose of it while disconnecting wiper motor crank arm connections to the wiper motor with the help of the Wiper Linkage Separator (J 39232). Unscrew the three mounting screws of the wiper motor from the wiper motor module and take out the wiper motor. Install the wiper motor onto the wiper motor module assembly and fasten it using the screws which you should tighten to 10 N.m (89 lb in). Once the drive links attach to the motor crank using a Wiper Linkage Installer, you can install the wiper transmission back and test the new wiper system for its operational performance.
Q: How to replace the wiper motor on Cadillac Escalade?
A:
You will need Wiper Transmission Separator (J 39232) and Wiper Transmission Installer (J 39529) to start the wiper motor replacement job. Start work by detaching both wiper arms and the air inlet grille panel. Loosen the four support bolts then withdraw the electric connector from the wiper motor housing. Pull out the wiper transmission assembly by taking its two bolts apart then removing it from the vehicle. Put the crank arm and motor wiper drive link together using the Wiper Transmission Separator (J 39232). After that detach the wiper motor using the two connecting bolts to access the wiper transmission assembly. Installing the wiper motor onto the transmission assembly requires you to first place it on the transmission unit and use two bolts to secure it. Tighten both bolts until they reach 8 N.m (71 lb in). Use the Wiper Transmission Installer J 39529 to connect the drive link to wiper motor crank arm before you install the wiper transmission assembly into the vehicle with two bolts at 9 N.m (80 lb in). Connect the wiper motor electric plug and mount the reinforcement panel with its four bolts at 9 N.m (80 lb in) torque rating. Replace the air inlet grille panel and wiper arms afterward. Test the wiper system operations to verify that everything works correctly.