How to Replace Front Coil Springs and Shock Absorber on Cadillac SRX?

Vehicle support and lift are necessary before starting the replacement of shock absorber parts and their components. Start by removing the wheel along with the tire from the vehicle before extracting its shock module. Introduce the shock module into the spring compressor while marking the upper Control Arm assembly and insulator for accurate installation during which the shock absorber must have a free movement. Begin by compressing the coil spring using the spring compressor forcing screw and then remove the shock absorber from the shock module after you have removed both the magnaride sensor nut and the shock absorber upper retaining nut. The compressor forcing screw needs adjustment for the upper mounting plate and coil spring removal before removing the upper Control Arm Bracket assembly and insulator and coil spring from the spring compressor. The upper Control Arm Bracket alignment pins should be oriented at 90 degrees when inserting the shock absorber into its bottom mounting holes. The spring compressor requires the shock absorber together with insulator, upper Control Arm Bracket assembly and coil spring which need to be aligned using the forcing screw to compress the coil spring once more. Apply 25 nm (18 lb ft) torque to the shock absorber retaining nut after which the magnaride sensor nut requires 20 nm (15 lb ft) torque. Take the shock module away from the spring compressor before reattaching it to the car. Put back the tire along with the wheel then lower the vehicle down.

How to service and repair a coil springs and shock absorber on Cadillac SRX?

Start by lifting the vehicle then supporting it before removing wheels and tires to gain access to the shock absorber. Use the spring compressor to detach the shock module from the vehicle and place it into the device for insertion. Place upper Control Arm assembly marks along with the insulator before reinstallation and maintain the shock absorber with free movement while compression of the spring remains steady. The compressor forcing screw needs to be turned until the coil spring reaches proper compression for removing both the magnaride sensor nut and shock absorber upper retaining nut before extracting the shock absorber from the shock module. The compressor forcing screw allows removal of the upper mount plate and compression of the coil spring. Next comes the upper Control Arm bracket and insulator until they are fully detached. To install correctly position the upper Control Arm bracket alignment pins at a 90-degree angle with respect to shock absorber lower mounting holes. Put the shock absorber assembly together with the coil spring and insulator and upper Control Arm bracket inside the spring compressor, normalize all marks before using the screw to re-compress the coil spring. Set the shock absorber retaining nut to 25 n.m (18 lb ft) torque until tight then torque the magnaride sensor nut. Following removal of the shock module from the spring compressor resume its installation on the vehicle after which you can reinstall the tire and wheel and then lower the vehicle.

OEM Cadillac SRX Coil Springs

Strut Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

17 Coil Springs found

View related parts
Cadillac SRX Coil Spring, Rear Part Number: 22808430
$51.39 MSRP: $96.50
You Save: $45.11 (47%)
ADD TO CART
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2016 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Cadillac SRX Coil Spring, Front Part Number: 20907392
$38.25 MSRP: $113.16
You Save: $74.91 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Front Coil; Coil Springs; Spring; Spring, Front Chassis
- Position: Front
- Replaces: 15871625
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2016 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Cadillac SRX Coil Spring, Rear Part Number: 22808432
$50.13 MSRP: $94.15
You Save: $44.02 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2016 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Cadillac SRX Coil Spring, Rear Part Number: 22808431
$51.39 MSRP: $96.50
You Save: $45.11 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2016 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Cadillac SRX Coil Spring Part Number: 88955536
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs; Spring
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2008 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac SRX Coil Spring, Front Part Number: 25810851
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs; Spring
- Position: Front
- Replaces: 15797105, 25816759, 25750158, 15868835
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac SRX Coil Spring, Front Part Number: 20906124
Product Specifications
- Other Name: Spring, Front Coil; Coil Springs; Spring; Spring, Front Chassis
- Position: Front
- Replaces: 20834667
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2016 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Cadillac SRX Coil Spring, Rear Part Number: 20847941
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2011 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS
View related parts
Cadillac SRX Coil Spring, Rear Part Number: 20847939
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2011 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS
View related parts
Cadillac SRX Coil Spring Part Number: 20906123
Product Specifications
- Other Name: Spring; Coil Springs
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS
View related parts
Cadillac SRX Coil Spring Part Number: 20906122
Product Specifications
- Other Name: Spring; Coil Springs
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS
View related parts
Cadillac SRX Spring, Front Part Number: 25810850
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac SRX Coil Spring, Front Part Number: 25810849
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs; Spring
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac SRX Coil Spring, Front Part Number: 25810848
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac SRX Coil Spring, Rear Part Number: 20847940
Product Specifications
- Other Name: Spring-Rear; Coil Springs; Spring; Spring, Rear Spring
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2011 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS
View related parts
Cadillac SRX Spring, Rear Part Number: 10356530
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac SRX Coil Spring, Rear Part Number: 10356529
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS

Cadillac SRX Coil Springs

Want to cut long-term maintenance and repair costs? Choose OEM Coil Springs. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Cadillac SRX parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Cadillac SRX Coil Springs includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Cadillac SRX Coil Springs are crucial component parts of the Cadillac SRX-a mid-size luxury SUV-which has established itself fairly well since its production. These two coil spring functions in loading the weight of the car and taking or moderating the impacts from the uneven terrains, which determines the car heights and wheels; alignment thus improving its efficiency and safety. Coil springs used in Caddy SRX include linear rate spring, progressive spring, and dual rate spring, which are designed hearken to the desired performance. This kind of flexibility makes sure that Cadillac SRX can perform various types of roads and surfaces and at the same time makes sure that the ride is as comfortable as possible. Specifically designed for the two generations of the Cadillac SRX, these coil springs are crucial to avoid such problems as sagging and improper wear of the tires, thus preserving the vehicle's longevity. This is especially realized through the Cadillac SRX specifications of power which encompasses its possible available engines and safety while including durability of coil springs as a supporting suspension. For instance, the Cadillac SRX likewise has a feature that comprises of adjustable coil springs that enable the fine tweaking of a car's ground clearance depending on the size of the car's wheels and tires. Thus, Cadillac SRX, with its performance characteristics, safety and luxuriousness, with high-quality coil springs as its main supporting element, occupies a deserved place in the automotive market and remains truly popular among the companies' clientele.

Cadillac SRX Coil Springs Parts and Q&A

Coil Spring, Front
25810851
Q: How to Replace Front Coil Springs and Shock Absorber on Cadillac SRX?
A:
Vehicle support and lift are necessary before starting the replacement of shock absorber parts and their components. Start by removing the wheel along with the tire from the vehicle before extracting its shock module. Introduce the shock module into the spring compressor while marking the upper Control Arm assembly and insulator for accurate installation during which the shock absorber must have a free movement. Begin by compressing the coil spring using the spring compressor forcing screw and then remove the shock absorber from the shock module after you have removed both the magnaride sensor nut and the shock absorber upper retaining nut. The compressor forcing screw needs adjustment for the upper mounting plate and coil spring removal before removing the upper Control Arm Bracket assembly and insulator and coil spring from the spring compressor. The upper Control Arm Bracket alignment pins should be oriented at 90 degrees when inserting the shock absorber into its bottom mounting holes. The spring compressor requires the shock absorber together with insulator, upper Control Arm Bracket assembly and coil spring which need to be aligned using the forcing screw to compress the coil spring once more. Apply 25 nm (18 lb ft) torque to the shock absorber retaining nut after which the magnaride sensor nut requires 20 nm (15 lb ft) torque. Take the shock module away from the spring compressor before reattaching it to the car. Put back the tire along with the wheel then lower the vehicle down.
Coil Spring
88955536
Q: How to service and repair a coil springs and shock absorber on Cadillac SRX?
A:
Start by lifting the vehicle then supporting it before removing wheels and tires to gain access to the shock absorber. Use the spring compressor to detach the shock module from the vehicle and place it into the device for insertion. Place upper Control Arm assembly marks along with the insulator before reinstallation and maintain the shock absorber with free movement while compression of the spring remains steady. The compressor forcing screw needs to be turned until the coil spring reaches proper compression for removing both the magnaride sensor nut and shock absorber upper retaining nut before extracting the shock absorber from the shock module. The compressor forcing screw allows removal of the upper mount plate and compression of the coil spring. Next comes the upper Control Arm bracket and insulator until they are fully detached. To install correctly position the upper Control Arm bracket alignment pins at a 90-degree angle with respect to shock absorber lower mounting holes. Put the shock absorber assembly together with the coil spring and insulator and upper Control Arm bracket inside the spring compressor, normalize all marks before using the screw to re-compress the coil spring. Set the shock absorber retaining nut to 25 n.m (18 lb ft) torque until tight then torque the magnaride sensor nut. Following removal of the shock module from the spring compressor resume its installation on the vehicle after which you can reinstall the tire and wheel and then lower the vehicle.