How to replace the rear differential cover and gasket on an 8.6/9.5 LD axle on Cadillac Escalade ESV?

The initial steps to replace the 8.6/9.5 LD axle rear housing cover and gasket require a vehicle lift with subsequent axle draining. Use caution to prevent damage to the rear axle housing cover gasket before removing the bolts securing the rear axle housing cover. Afterwards drain the axle lubricant into a suitable container. Check the rear axle cover gasket for cuts or damage or nicks; Until problems are detected with the gasket you should make a replacement. Reversible gaskets require low-pollution cleaning with a matching solvent but you should also clean both the rear axle housing cover and the housing surface. After installing the rear axle housing cover gasket you must put on the rear axle housing cover before tightening the rear axle housing cover bolts . Tighten the 8.6 inch axle bolts at 30 N.m (20 lb ft) in a crosswise pattern but use a torque of 25 N.m (18 lb ft) for the 9.5 inch axle bolts. Apply proper axle lubricant into the rear axle before lowering the vehicle down.

OEM Cadillac Escalade ESV Differential Cover

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Differential Covers found

View related parts
Cadillac Escalade ESV Axle Cover, Rear Part Number: 19333218
$62.01 MSRP: $105.58
You Save: $43.57 (42%)
ADD TO CART
Product Specifications
- Other Name: Cover Kit, Rear Axle Housing; Housing Cover; Cover
- Position: Rear
- Replaces: 12471640, 12471309, 15290822
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2008 Cadillac Escalade ESV | Base, Platinum | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Axle Cover, Rear Part Number: 19133288
$36.43 MSRP: $54.61
You Save: $18.18 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Kit, Rear Axle Housing (9.5); Cover; Cover Kit, Rear Axle Housing
- Position: Rear
- Replaces: 12471310
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2006 Cadillac Escalade ESV | Base | 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade ESV Differential Cover, Rear Part Number: 25824253
$89.83 MSRP: $142.61
You Save: $52.78 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover-Rear Axle Housing; Axle Cover; Housing Cover; Cover; Cover, Rear Axle Housing
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2014 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX
View related parts
Cadillac Escalade ESV Axle Cover Part Number: 12471311
$23.18 MSRP: $46.54
You Save: $23.36 (51%)
ADD TO CART
Product Specifications
- Other Name: Cover Package; Cover
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Cadillac Escalade ESV | Base | 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade ESV Differential Cover, Rear Part Number: 26067595
Product Specifications
- Other Name: Cover, Rear Axle Housing; Axle Cover; Housing Cover; Cover
- Position: Rear
- Replaces: 26008172
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003 Cadillac Escalade ESV | Base | 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade ESV Axle Cover, Rear Part Number: 26067253
Product Specifications
- Other Name: Cover, Rear Axle Housing; Housing Cover; Cover
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2005 Cadillac Escalade ESV | Base | 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade ESV Differential Cover, Rear Part Number: 19133285
$117.73 MSRP: $185.23
You Save: $67.50 (37%)
Product Specifications
- Other Name: Cover Kit, Rear Axle Housing (9.5); Axle Cover; Cover; Cover Kit, Rear Axle Housing
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Axle Cover, Rear Part Number: 12471445
Product Specifications
- Other Name: Cover Kit, Rear Axle Housing; Cover
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Cadillac Escalade ESV | Base | 8 Cyl 6.0 L GAS

Cadillac Escalade ESV Differential Cover

Want to cut long-term maintenance and repair costs? Choose OEM Differential Cover. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Cadillac Escalade ESV parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Cadillac Escalade ESV Differential Cover includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Cadillac Escalade ESV Differential Cover Parts and Q&A

Differential Cover, Rear
19133285
Q: How to replace the rear differential cover and gasket on an 8.6/9.5 LD axle on Cadillac Escalade ESV?
A:
The initial steps to replace the 8.6/9.5 LD axle rear housing cover and gasket require a vehicle lift with subsequent axle draining. Use caution to prevent damage to the rear axle housing cover gasket before removing the bolts securing the rear axle housing cover. Afterwards drain the axle lubricant into a suitable container. Check the rear axle cover gasket for cuts or damage or nicks; Until problems are detected with the gasket you should make a replacement. Reversible gaskets require low-pollution cleaning with a matching solvent but you should also clean both the rear axle housing cover and the housing surface. After installing the rear axle housing cover gasket you must put on the rear axle housing cover before tightening the rear axle housing cover bolts . Tighten the 8.6 inch axle bolts at 30 N.m (20 lb ft) in a crosswise pattern but use a torque of 25 N.m (18 lb ft) for the 9.5 inch axle bolts. Apply proper axle lubricant into the rear axle before lowering the vehicle down.