How to properly service and repair the Trunk Lid Lift Support on Buick LaCrosse?

Begin by holding up the rear compartment lid while it is also open. Insert a small flat-blade tool under the locking clip on top of the strut upper ball stud to push it out. Use the same tool to push away the lower locking clip on the ball stud before taking out the lower ball stud from the strut. Once ready remove the entire strut from the hinge. You will install the new rear compartment lid strut by placing it on the hinge then pressing the lower and upper ball studs in sequence before closing both locking clips. Afterwards close the rear compartment by taking off the support.

How to replace the rear Trunk Lid Lift Support on Buick Regal?

Start replacement by opening then holding up the rear compartment lid. Use a small flat tool to lift the locking clip on the strut upper ball stud then push out the upper ball stud. Use the tool to lift the docking clip from the lower ball stud and press out both ball studs to take the hinge away from the strut. Place the new rear compartment lid strut on the hinge by pushing down the lower ball stud first then the upper ball stud while keeping both locking clips secured. To finish the process unscrew the rear compartment support before placing the lid cover back in its position.

OEM Buick Trunk Lid Lift Support

Lift Strut Rod

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Trunk Lid Lift Supports found

View related parts
Buick Lift Cylinder, Black; Blue; Red Part Number: 12506722
$66.91 MSRP: $129.77
You Save: $62.86 (49%)
ADD TO CART
Product Specifications
- Other Name: Strut Kit; Trunk Lid Lift Support; Liftgate Lift Support; Tailgate Lift Support; Lift Support; Support Cylinder Plate; Weatherstrip Support; Rear Compartment Lid Strut Kit.
- Replaces: 12506721
Fits the following Buick Models:
- Century | 1984-1996 | Custom, Estate Wagon, Limited, Special | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
View related parts
Buick Lift Cylinder, Rear Part Number: 25908346
Product Specifications
- Other Name: Strut, Rear Compartment Lid Or Tail Gate Counter Balance; Trunk Lid Lift Support; Lift Support; Support Strut
- Position: Rear
- Replaces: 15211567
Fits the following Buick Models:
- LaCrosse | 2005-2009 | CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
Buick Lift Cylinder, Rear Part Number: 10419581
$47.31 MSRP: $74.13
You Save: $26.82 (37%)
Product Specifications
- Other Name: Strut, Rear Compartment Lid Or Tail Gate Counter Balance; Trunk Lid Lift Support; Lift Support; Support Strut
- Position: Rear
Fits the following Buick Models:
- Century | 2000-2005 | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
- Regal | 1999-2004 | GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
Buick Support Cylinder, Rear Part Number: 20288703
Product Specifications
- Other Name: Support, Rear Compartment Lid Strut; Trunk Lid Lift Support; Lift Support
- Position: Rear
Fits the following Buick Models:
- Riviera | 1985 | Base, Luxury, T-Type | 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick Counter Balance, Rear Part Number: 20234501
Product Specifications
- Other Name: Support, Rear Compartment Lid Strut; Trunk Lid Lift Support; Lift Support; Support Cylinder; Support
- Position: Rear
Fits the following Buick Models:
- Skylark | 1984-1985 | Custom, Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS
View related parts
Buick Lift Cylinder Part Number: 9056900
Product Specifications
- Other Name: Strut Assembly-Rear Compartment Lid; Trunk Lid Lift Support; Lift Support; Support Strut; Strut, Rear Compartment Lid Or Tail Gate Counter Balance
- Position: Rear
Fits the following Buick Models:
- LaCrosse | 2014-2016 | Base, Leather, Premium, Sport Touring | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Buick Lift Cylinder, Rear Part Number: 25972292
Product Specifications
- Other Name: Strut, Rear Compartment Lid Or Tail Gate Counter Balance; Trunk Lid Lift Support; Lift Support; Support Strut
- Position: Rear
Fits the following Buick Models:
- LaCrosse | 2010-2013 | Base, Convenience, CX, CXL, CXS, Leather, Premium, Touring | 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Buick Lift Cylinder, Rear Part Number: 25688530
Product Specifications
- Other Name: Strut, Rear Compartment Lid Or Tail Gate Counter Balance; Trunk Lid Lift Support; Lift Support; Strut
- Position: Rear
- Replaces: 25641552, 25672604, 25631368
Fits the following Buick Models:
- Riviera | 1995-1999 | Base | 6 Cyl 3.8 L GAS
View related parts
Buick Support Cylinder, Rear Part Number: 20721751
Product Specifications
- Other Name: Strut, Rear Compartment Lid Or Tail Gate Counter Balance; Trunk Lid Lift Support; Lift Support; Strut, Rear Compartment Lid
- Position: Rear
Fits the following Buick Models:
- Reatta | 1988-1991 | Base | 6 Cyl 3.8 L GAS
View related parts
Buick Lift Cylinder, Rear Part Number: 10401062
Product Specifications
- Other Name: Strut, Rear Compartment Lid Or Tail Gate Counter Balance; Trunk Lid Lift Support; Lift Support; Support Strut
- Position: Rear
Fits the following Buick Models:
- Century | 1997-1999 | Custom, Limited | 6 Cyl 3.1 L GAS
- Regal | 1997-1999 | 25th Anniversary Edition, GS, LS | 6 Cyl 3.8 L GAS
View related parts
Buick Lift Cylinder, Rear Part Number: 13437377
$12.92 MSRP: $19.22
You Save: $6.30 (33%)
Product Specifications
- Other Name: Strut, Rear Compartment Lid Or Tail Gate Counter Balance; Trunk Lid Lift Support; Lift Support
- Position: Rear
Fits the following Buick Models:
- Cascada | 2016-2019 | Base, Premium, Sport Touring | 4 Cyl 1.6 L GAS
View related parts
Buick Lift Cylinder, Rear Part Number: 13262104
$6.91 MSRP: $10.28
You Save: $3.37 (33%)
Product Specifications
- Other Name: Strut, Rear Compartment Lid Or Tail Gate Counter Balance; Trunk Lid Lift Support; Lift Support; Support Strut
- Position: Rear
Fits the following Buick Models:
- Regal | 2011-2017 | Base, CXL, GS, Premium, Sport Touring | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)

Buick Trunk Lid Lift Support

Choose OEM Trunk Lid Lift Support, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Buick's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Buick Trunk Lid Lift Support. You can shop at highly competitive prices and protect your budget. All our genuine Buick parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Buick Trunk Lid Lift Support Parts and Q&A

Lift Cylinder, Rear
25908346
Q: How to properly service and repair the Trunk Lid Lift Support on Buick LaCrosse?
A:
Begin by holding up the rear compartment lid while it is also open. Insert a small flat-blade tool under the locking clip on top of the strut upper ball stud to push it out. Use the same tool to push away the lower locking clip on the ball stud before taking out the lower ball stud from the strut. Once ready remove the entire strut from the hinge. You will install the new rear compartment lid strut by placing it on the hinge then pressing the lower and upper ball studs in sequence before closing both locking clips. Afterwards close the rear compartment by taking off the support.
Lift Cylinder, Rear
10419581
Q: How to replace the rear Trunk Lid Lift Support on Buick Regal?
A:
Start replacement by opening then holding up the rear compartment lid. Use a small flat tool to lift the locking clip on the strut upper ball stud then push out the upper ball stud. Use the tool to lift the docking clip from the lower ball stud and press out both ball studs to take the hinge away from the strut. Place the new rear compartment lid strut on the hinge by pushing down the lower ball stud first then the upper ball stud while keeping both locking clips secured. To finish the process unscrew the rear compartment support before placing the lid cover back in its position.